Palladium-catalyzed arylation of enynes and electron-deficient alkynes using diaryliodonium salts

A new single-pot procedure for the synthesis of aryl alkynes is described. Palladium catalyzes the coupling reaction of diaryliodonium compounds with enynes and electron-deficient alkynes to give aryl alkynes in good yields.     

Achiral tetrahydrosalen ligands for the synthesis of C(2)-symmetric titanium complexes: a structure and diastereoselectivity study

Achiral tetrahydrosalen ligands have been employed in the synthesis of chiral C(2)-symmetric titanium complexes. When combined with tetrahydrosalen ligands 2a and 2b, titanium tetraisopropoxide liberated 2 equiv of isopropyl alcohol and generated the (tetrahydrosalen)Ti(O-i-Pr)(2) complexes 3a and 3b. These complexes were shown to be C(2)-symmetric by (1)H and (13)C[(1)H] NMR spectrometry and X-ray crystallography. X-ray structures of 3a and 3b indicate that the bonding of the tetrahydrosalen ligand to titanium is different than the bonding of salen ligands to titanium. Whereas salen ligands usually bind to titanium in a planar arrangement, the tetrahydrosalen is bonded with the phenoxide oxygens mutually trans. When bound in this fashion, the nitrogens of the tetrahydrosalen ligand and the titanium become stereogenic centers. The use of titanium complexes of high enantiopurity in the generation of tetrahydrosalen titanium adducts resulted in a maximum diastereoselectivity of 2:1. The diastereoselectivity obtained using chiral titanium alkoxide complexes was greater than the diastereoselectivity observed when a tetrahydrosalen ligand derived from (S,S)-trans-diaminocyclohexane was employed.     

Analysis of combinatorial chemistry samples by micellar electrokinetic chromatography

A micellar electrokinetic chromatography (MEKC) method has been developed that can evaluate the purity of samples generated in combinatorial chemistry libraries. This method uses an open tube capillary (27 cm x 50 microm) along with a run buffer composed of sodium dodecyl sulfate (SDS), hydroxypropyl-beta-cyclodextrin, and sodium tetraborate coupled with UV detection. Neutral compounds and compounds that were insoluble in aqueous buffers could be analyzed under these conditions in approximately 3 min. The concentration of SDS and the concentration of hydroxypropyl-beta-cyclodextrin effected the separation. The affect on selectivity resulting from the addition of an organic modifier to the run buffer was examined. The low background absorbency of the run buffer made for easy detection of compounds that absorbed at low UV wavelengths. The quick analysis time made this suitable for analysis of combinatorial chemistry samples.     

Regioselective synthesis of polysubstituted pyrazoles and isoxazoles

A regioselective synthesis has been developed for the preparation of unsymmetrical 1,3,5-triaryl-4-alkylpyrazolines and -pyrazoles by treatment of alpha-benzotriazolyl-alpha,beta-unsaturated ketones with monosubstituted hydrazines followed by alkylation at the 4-position of the pyrazoline ring. Reaction of alpha-benzotriazolyl-alpha,beta-unsaturated ketones with hydroxylamine gives 3,5-disubstituted isoxazoles regioselectively.     

Comparison of photosensitizer (AIPcS2) quantification techniques: in situ fluorescence microsampling versus tissue chemical extraction

A noninvasive in situ fluorescence-based method for the quantification of the photosensitizer chloroaluminum disulfonated phthalocyanine was compared to the highly accurate but nonreal time ex vivo spectrofluorometry method. Our in vivo fluorescence technique is designed to allow real-time assessment of photosensitizer in tumor and normal tissues and therefore temporally optimal light delivery. Laser-induced fluorescence was used to measure photosensitizer concentration from multiple microscopic regions of tissue. Ex vivo chemical extraction was used to quantify photosensitizer concentration in the same volume of tissue. The amount of photosensitizer in the vascular and/or parenchymal compartments of skeletal muscle and liver was determined by quantifying fluorescent signal in vivo, ex vivo and after blood removal. Confocal microscopy was used to spatially document photosensitizer localization 30 min and 24 h after delivery. While a linear correlation can exist between the fluorescence intensity measured by our fiber-optic bundle system and actual tissue concentration, temporal changes to this calibration line exist as the photosensitizer changes its partitioning fraction between the blood (vasculature) and the tissue parenchyma. In situ photosensitizer fluorescence microsampling (dosimetry) systems can be performed in real time and linearly correlated to actual tissue concentration with minimal intertissue variance. Tissue-specific differences may require temporal alterations in the calibration.     

Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

One-carbon homologation of carboxylic acids via BtCH(2)TMS: a safe alternative to the Arndt--Eistert reaction

Carboxylic acids are converted into the corresponding homologated acids or esters, using easily available 1-(trimethylsilylmethyl)benzotriazole (1) as a one-carbon synthon. The effectiveness of the reaction has been investigated on six aryl and seven alkyl carboxylic acids.     

A donor--acceptor--donor bridging ligand in a class III mixed-valence complex

The novel mononuclear and dinuclear complexes [Ru(trpy)(bpy)(apc)][PF(6)] and [(Ru(trpy)(bpy))(2)(mu-adpc)][PF(6)](2) (bpy = 2,2'-bipyridine, trpy = 2,2':6',2' '-terpyridine, apc(-) = 4-azo(phenylcyanamido)benzene, and adpc(2)(-) = 4,4'-azodi(phenylcyanamido)) were synthesized and characterized by (1)H NMR, UV-vis, and cyclic voltammetry. Crystallography showed that the dinuclear Ru(II) complex crystallizes from diethyl ether/acetonitrile solution as [(Ru(trpy)(bpy))(2)(mu-adpc)][PF(6)](2).2(acetonitrile).2(diethyl ether). Crystal structure data are as follows: crystal system triclinic, space group P1, with a, b, and c = 12.480(2), 13.090(3) and 14.147(3) A, respectively, alpha, beta, and gamma = 79.792(3), 68.027(3), and 64.447(3) degrees, respectively, V = 1933.3(6) A(3), and Z = 1. The structure was refined to a final R factor of 0.0421. The mixed-valence complex with metal ions, separated by a through-space distance of 19.5 A, is a class III system, having the comproportionation constant K(c) = 1.3 x 10(13) and an intervalence band at 1920 nm (epsilon(max) = 10 000 M(-1) cm(-1)), in dimethylformamide solution. The results of this study strongly suggest that the bridging ligand adpc(2-) can mediate metal-metal coupling through both hole-transfer and electron-transfer superexchange mechanisms.     

Acid-induced gelation of heat-treated milk studied by diffusing wave spectroscopy

Fresh skim milk is a stable colloidal system containing casein micelles and whey proteins. By decreasing the pH, the casein micelles become unstable and a gel is formed. During heat treatment at temperatures higher than 70 degrees C, the major whey proteins, e.g. alpha-lactalbumin and beta-lactoglobulin denature and start to interact with each other and with casein micelles. This changes the colloidal properties of the casein micelles. In this article, the pH-induced gel formation of heat-treated milk and the role of whey proteins was studied. Heat treatment in the range 70-90 degrees C induced a shift in gelation pH of skim milk to more alkaline pH values. This shift was directly related to whey protein denaturation. By using WPF milk it was shown that beta-lactoglobulin is principally responsible for the shift in gelation pH. alpha-lactalbumin caused neither alone nor in combination with beta-lg, an effect on the gelation pH. Heat treatment of milk for 10 min at 90 degrees C resulted in complete denaturation of the beta-lg present in skim milk but it is estimated that the casein micelles are coated only up to 40% by whey proteins when compared with pure whey protein aggregates.     

Hydrothermal syntheses and structural characterizations of organic-inorganic hybrid materials of the M(II)-ligand/vanadium oxide system (M(II) = Cu(II) and Zn(II); ligand = 2,2'-bipyridine and 2,2':6',2"-terpyridine)

Investigation into the incorporation of complex transition metal-organic units into vanadium oxide structures has resulted in the preparation of several novel composite materials. Hydrothermal reactions of V(2)O(5), 2,2'-bipyridine, an appropriate Zn or Cu starting material, and H(2)O under a variety of conditions yielded the organic-inorganic hybrid materials [[Zn(2,2'-bpy)](2)V(4)O(12)] (1) and [Cu(2,2'-bpy)V(4)O(10.5)] (2). Blocking an additional coordination site on the secondary metal center by using a tridentate organonitrogen ligand, 2,2':6',2' '-terpyridine in place of 2,2'-bipyridine, allowed the isolation of [Cu(terpy)V(2)O(6)] (3) and [[Zn(terpy)](2)V(6)O(17)] (4). The structure of 1 is a two-dimensional zinc vanadate layer, composed of rings containing four corner-sharing [VO(4)] vanadium(V) tetrahedra linked through six zinc square pyramids, with the 2,2'-bipyridine groups attached to the zinc centers and directed above and below the plane of the layer. In contrast to 1, the layer of 2 is based on a two-dimensional vanadium oxide substructure composed of vanadium(IV) square pyramids and vanadium(V) tetrahedra with copper square pyramids attached through corner-sharing interactions with vanadium tetrahedra such that the bipyridine ligands attached to the copper sites form staggered stacks above and below the plane of the layer. Compound 3 consists of one-dimensional vanadium oxide chains of corner-sharing tetrahedra linked through copper-terpyridine units into a two-dimensional bimetallic oxide of composition [CuV(2)O(6)], while the layer structure of 4 contains more complex one-dimensional vanadium oxide chains composed of fused rings of six corner-sharing vanadium oxide tetrahedra which are linked into a layer through [Zn(terpy)](2+) units.