A validated gas chromatographic method for the evaluation of enzymatic enantioselectivity in kinetic resolution applications

An enantioselective gas chromatography (GC) method has been developed and validated for determination of the enantiomers of citronellol in kinetic resolution experiments. S-(-)-beta-Citronellol is a precursor of rose oxide. After solid-phase extraction (SPE) with ethyl acetate, the enantiomers of R-(+)-beta-citronellol and S-(-)-beta-citronellol and their corresponding acetate- and butyrate esters were separated through enantioselective GC respectively. The method was validated and found to be reproducible, specific, accurate, and precise. Analyte recoveries and detection limits were also determined. The applicability of this method was shown in a kinetic resolution experiment using lipase A of Bacillus subtilis.     

Apparent Specific Volume Measurements of Poly(ethylene oxide), Poly(butylene oxide), Poly(propylene oxide), and Octadecyl Chains in the Micellar State as a Function of Temperature

Apparent specific densities of aqueous solutions of the diblock copolymers C18(EO)100, C18(EO)20, and (EO)92(BO)18 and the triblock copolymers (EO)25(PO)40(EO)25 and (EO)21(PO)47(EO)21 in the micellar state have been measured over a temperature range from 10 to 90 degrees C at concentrations between 1% and 5%, using an oscillating tube densitometer. From these measurements, apparent specific volumes of poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), poly(butylene oxide) (PBO), and octadecane in the micellar state have been determined. The composition of the block copolymers was checked by NMR spectroscopy. Results were compared with published data for the polymers and bulk values for octadecane, respectively. The apparent specific density of PEO chains in the dissolved state was also measured for PEG4600 solutions at different concentrations and compared with results in the micellar state. The results presented in the paper are crucial in connection with analysis and modeling of small-angle X-ray scattering (SAXS) data from polymer and block copolymer micellar systems. PEO and PPO have a relatively low apparent partial specific volume in water at low temperatures. It is associated with water molecules making strong hydrogen bonds with the oxygen atoms on the polymer backbone. These water molecules gradually become disordered when the temperature is increased and the polymer apparent specific volume increases. For PBO in the micellar cores of PBO-PEO block copolymer micelles and in PNiPAM microgels, pronounced temperature dependence with the same origin is also found. The application of the derived results for the apparent specific volume of PEO for deriving contrast factors is demonstrated and the results are used in the analysis of SAXS data for semidilute solutions of PEG4600 in a broad temperature range.     

Thermochemical aspects of proton transfer in the gas phase

The beginning of the twentieth century saw the development of new theories of acidity and basicity, which are currently well accepted. The thermochemistry of proton transfer in the absence of solvent attracted much interest during this period, because of the fundamental importance of the process. Nevertheless, before the 1950s, few data were available, either from lattice energy evaluations or from calculations using the emerging molecular orbital theory. Advances in mass spectrometry during the last 40 years allowed studies of numerous systems with better accuracy. Thousands of accurate gas-phase acidities or basicities are now available, for simple atomic and molecular systems and for large biomolecules. The intrinsic effect of structure on the Br?nsted basic or acidic properties of molecules and the influence of solvents have been unravelled. In this tutorial, the basics of the thermodynamic principles involved are given, and the mass spectrometric techniques are briefly reviewed. Advances in the design and measurements of gas-phase superacids and superbases are described. Recent studies concerning biomolecules are also evoked.     

Site-isolation effects in a dendritic nickel catalyst for the oligomerization of ethylene

Dendrimers, specifically suited to construct site-isolated groups due to their well-defined hyperbranched structure, have been used as a ligand design element for the construction of nickel catalysts for ethylene oligomerization. The dendritic P,O ligand indeed suppresses the formation of inactive bis(P,O)Ni complexes in toluene, as is evident from NMR studies, and, as a consequence, outperforms the parent ligand in catalysis in this solvent. The dendritic effect observed in methanol is more subtle because both the dendritic ligand 1 and the parent 2 form bis(P,O)nickel complexes in solution according to NMR spectroscopy. Unlike the parent complex 8, the dendritic bis(P,O)Ni complex 7 derived from dendrimer ligand 1 is able to dissociate to a mono-ligated species under catalytic conditions, that is, 40 bar ethylene and 80 degrees C, which can enter the catalytic cycle. Indeed, dendritic ligand 1 gives much more active nickel catalysts for the oligomerization in methanol than does 2.     

Rapid PCR in a continuous flow device

Continuous flow polymerase chain reaction (CFPCR) devices are compact reactors suitable for microfabrication and the rapid amplification of target DNAs. For a given reactor design, the amplification time can be reduced simply by increasing the flow velocity through the isothermal zones of the device; for flow velocities near the design value, the PCR cocktail reaches thermal equilibrium at each zone quickly, so that near ideal temperature profiles can be obtained. However, at high flow velocities there are penalties of an increased pressure drop and a reduced residence time in each temperature zone for the DNA/reagent mixture, that potentially affect amplification efficiency. This study was carried out to evaluate the thermal and biochemical effects of high flow velocities in a spiral, 20 cycle CFPCR device. Finite element analysis (FEA) was used to determine the steady-state temperature distribution along the micro-channel and the temperature of the DNA/reagent mixture in each temperature zone as a function of linear velocity. The critical transition was between the denaturation (95 degrees C) and renaturation (55 degrees C-68 degrees C) zones; above 6 mm s(-1) the fluid in a passively-cooled channel could not be reduced to the desired temperature and the duration of the temperature transition between zones increased with increased velocity. The amplification performance of the CFPCR as a function of linear velocity was assessed using 500 and 997 base pair (bp) fragments from lambda-DNA. Amplifications at velocities ranging from 1 mm s(-1) to 20 mm s(-1) were investigated. The 500 bp fragment could be observed in a total reaction time of 1.7 min (5.2 s cycle(-1)) and the 997 bp fragment could be detected in 3.2 min (9.7 s cycle(-1)). The longer amplification time required for detection of the 997 bp fragment was due to the device being operated at its enzyme kinetic limit (i.e., Taq polymerase deoxynucleotide incorporation rate).     

Building unit and topological evolution in the hydrothermal DABCO-U-F system

Compounds NDUF-1 ([C(6)H(14)N(2)](UO(2))(2)F(6); P2(1)/c, a = 6.9797(15) A, b = 8.3767(15) A, c = 23.760(5) A, beta = 91.068(4) degrees, V = 1388.9(5) A(3), Z = 4), NDUF-2 ([C(6)H(14)N(2)](2)(UO(2))(2)F(5)UF(7).H(2)O), NDUF-3 ((NH(4))(7)U(6)F(31); R3, a = 15.4106(8) A, c = 10.8142(8) A, V = 2224.1(2) A(3), Z = 3), and NDUF-4 ([NH(4)]U(3)F(13)) have been synthesized hydrothermally from fixed composition reactant mixtures over variable time periods [DABCO (C(6)H(12)N(2)), UO(2)(NO(3))(2).6H(2)O, HF, and H(2)O; 2-14 days]. Observed is a systematic evolution of the structural building units within these materials from the UO(2)F(5) pentagonal bipyramid in NDUF-1 and -2 to the UF(8) trigonal prism in NDUF-2 and finally to the UF(9) polyhedron in NDUF-3 and -4 as a function of reaction time. Coupled to this coordination change is a reduction of U(VI) to U(IV) as well as a breakdown of the organic structure-directing agent from DABCO to NH(4)(+). These processes contribute to a structural transition from layered topologies (NDUF-1) to chain (NDUF-2), back to layered (NDUF-3), and ultimately to framework (NDUF-4) connectivities. The synthesis conditions, crystal structures, and possible transformation mechanisms within this system are presented.     

A photometric detector based on a blue light-emitting diode

The suitability of blue light-emitting diodes as radiation sources in molecular absorption spectroscopy was evaluated. Electronic as well as spectral considerations are discussed. A transducer based on a blue light-emitting diode and a photodiode is described which yields direct absorbance readings by passing the photocurrent to an integrated circuit logarithmic converter. The performance of this device was tested for commonly used spectrophotometric procedures for Cr, Mn, Zn, Fe and Cl and compared with conventional molecular absorption spectroscopy. Also investigated was the application of the transducer as a detector in flow-injection analysis.     

Preparative gas chromatography of volatile metal compounds-I Separation of aluminium, chromium and iron beta-diketonates

The analytical gas chromatography of a range of fluorinated and unfluorinated beta-diketonates of aluminium, chromium and iron has been studied m detail and conditions have been established for their complete separation; the complexes of trifluoroacetylpivaloylmethane show the best characteristics for this purpose. A range of liquid phases and column conditions have been considered and Apiezon substrates have been shown to give optimal resolution. The technique has been extended to a preparative scale with up to 0.1-g chelate samples, and the efficiency of the process demonstrated by the removal of 2% proportions of two metal complexes from a sample of the third. Implications of the technique for the purification of metals are discussed.     

神经网络和Eu^2＋离子在复合氟化物基体中跃迁发射的研究

运用人工神经网法对复合氟化物中Ｅｕ＾＋离子光谱结构进行了分类研究，对神经网络的基本特征进行了观察。实验表明，神经网的结构、初始权重以及作为训练集和预测集的随枘发组对最终结果都会产生重要影响。本研究采用测试集来监控训练过程，以避免“过训练”，并提高神经网的预测性能。     

A forth package for computer-controlled flow-injection analysis

An automated flow-injection system with a computer-controlled sample changer, injection device and digital photometer is described, for use with an Apple II. The software is understandable, flexible and easily adaptable to different computers provided with the programming language FORTH.