苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

三元乙丙橡胶的13C-NMR定量分析

用13C核磁共振波谱法对三元乙丙橡胶进行了研究，通过图谱中各个峰的积分值，并用特定的计算公式测定了三元乙丙橡胶中乙烯及第三单体乙叉降冰片烯的含量，为红外光谱批量的定量分析建立了基准化的标定。     

聚氯乙烯结构缺陷和热不稳定性之间关系的研究 2.各种结构缺陷含量和热脱氯化氢速率之间的关系

本工作采用溴加成法、酚解法、FTIR法及臭氧裂解法分别测定了五种不饱和蒸气压下聚合的PVC样品(u-PVC)和五种商品PVC样品(s-PVC)的总双键、总不稳定氯、孤立双键和内部双键的含量.通过研究结构缺陷和PVC的平均分子量及脱HCl速率的相互关系,揭示了不饱和总双键值,总不稳定氯和孤立双键含量彼此的相关性是建立在它们分别与1/M_n的相关性基础之上,从而得出了这三种定量值测得的主要都是端基烯丙基氯结构.根据三者对脱HCl速率的良好线性相关性,首次提出了端基烯丙基氯结构在HCl催化作用下异构化成内部烯丙基氯从而成为脱HCl速率主要原因的机理.     

乙烯基单体-N-取代马来酰亚胺共聚物玻璃化温度研究

用差示扫描量热仪对乙烯基单体/N-取代马来酰亚胺共聚物的玻璃化温度(T_g)进行测定.研究了共聚物组成、序列结构、乙烯基单体和N-取代马来酰亚胺种类对共聚物T_g的影响.提出了含共聚物组成和序列结构的T_g预测方程,该方程不仅适合于无规共聚物,还适合于具有严重交替倾向的共聚物.     

Synthesis and Structure Control of A New Kind of Inelastomer Impact Modifier with Core-shell Structure and Impact Modification to PVC/CPE

Introduction　　 As a structure material,a polymer has two important mechanical properties,i.e.,strength and toughing.Therefore,plastic toughening isalwaysa fundamental study on poly-mer materials.Traditionally,toughnessmodification isto make rubberasan elastomerimpactmodifier dispersed to plastic matrix which is hence toughened[1 ,2 ] .But as the toughness ofplastic is improved,the elastomerimpactmodifieralso reducesthe othermechanical propertiesof the material.Consequently,whether rigid par…     

荧光光谱法研究卟啉与金属离子配位反应机理初探

本文用荧光光谱法初步研究了卟啉与金属离子配位反应机理和部分催化剂的催化机理.实验发现,在一定条件下,卟啉以一种与其主要存在形式不同的变形体H₂P^*存在,根据H₂P^*的存在和产生的条件,对卟啉与金属离子配位反应的一般条件作出了较为满意的阐述.     

冠醚硒菁染料的合成

合成了对称和非对称两个新的冠醚硒菁染料2,2'-二乙基-45,4'5'-双并-(15-冠-5)硒碳菁碘化季铵盐和2,2'-二乙基-4,5-并-(15-冠-5)硒碳菁碘化季铵盐以用三种新的中间体2,2'-二硝基-4,5,4',5'-双并-(15-冠-5)二苯基二硒化物, 2-甲基-5,6-并-(15-冠-5)苯并硒唑和2-甲基-3-乙基-5,6-并-(15-冠-5)苯并硒碘化季铵盐。报道了它们的红外、紫外、核磁共振、质谱数据。     

THE COMPARISON OF LANZHOU LOESS PROFILE WITH VOSTOK ICE CORE IN ANTARCTICA OVER THE LAST GLACIATION CYCLE

Loess near Lanzhou in the late Pleistocene is very sensitive to climatic fluctuations. The Beiyuan terrace profile in Linxia City, of which the curve of susceptibility tallies with the trend of isotopic curves of Vostok 2083 m ice core in Antarctica, is 35m thick. There are five layers of paleosols under Malan loess(L_1). Upper three layers (S_(1-a),S(1-b)and S_(1-c) correspond to three warm stages in last interglaciation, Interstadial of Last Glacial (C stage in Antarctic ice core)was clearly recorded in the Beiyuan profile, in which three layers of paleosols and two of loess were formed. The lowest section of the profile belongs to penultimate glaciation, in which fossils of cold-drought-resistant mammal and mollusc have been discovered.     

含烯烃配体的过渡金属卡宾配合物的研究II.异戊二烯二羰基[乙氧基(苯基)卡宾]铁配合物的异构化产物的合成,波谱和结构研究及四羰基[乙氧基(五氯苯基)卡宾]铁的晶体结构

异戊二烯三羰基铁(1)与芳基锂ArLi(Ar=C6H5,ρ-CH3C6H4,ρ-CH3OC6H4,ρ-CF3C6H4)在低温下反应,再用Et3OBF4烷基化,可获得组成为C5H8(CO)2FeC(OC2H5)Ar的标题化合物的异构化产物(2一5)。当用LiC6Cl5作亲核试剂,在相同条件下与1反应时,只生成已知的配合物(CO4)FeC(OC2H5)C6Cl5(6)。由单晶X射线衍射数据推断出, 2和6的分子结构都属于单斜晶系,Z=4. 2的空间群为C2h[5]-P21/n,a=8.544(2), b=14.494(5), c=12.309(4)`A,β=96.16(2)`;6的空间群为C2h[5]-P21/c, a=14.126(3), b=6.805(1), c=19.182(5)A,β=103.58(2)`. 2和6的结构用SHELXTL直接法程序解出并经块矩阵最小二乘法修正,R分别为0.066和0.043。     

聚合物载体-稀土金属配合物的研究IV.含亚硫酰基聚合物载体-稀土金属配合物的合成,表征及其催化活性

Styrene-2-(methylsulfinyl)ethyl methacrylate copolymer-supported MCl3 complexes, where M = La, Pr, Nd, Eu, Ho, Er, Tm, and Yb, were prepared and characterized by IR spectroscopy. The catalytic activity of the polymer-supported NdCl3-(iso-Bu)3Al system towards stereospecific polymerisation of butadiene was 2-3 times higher than that of NdCl3-(iso-Bu)3Al-DMSO system. The cis-1,4 content of polybutadiene formed was >98%.