Laser stabilitron

We consider a new method for producing intensity stabilization of cw lasers. This method incorporates negative feedback from a nonlinear saturable absorber to provide wideband noise-reduction and may produce an output beam for which shot noise is below the quantum limit. This new method can be used with a large variety of cw lasers and is particularly applicable to frequency-stabilized lasers which are locked to absorption lines.Permanent address: Institute of Laser Physics, Novosibirsk 630090, Russia     

Subchronic oral toxicity (six months) of carboxyethylgermanium sesquioxide [(HOOCCH2CH2Ge)2O3]n in rats

After briefly renewing toxicological data on germanium compounds, the authors report on the subchronic oral toxicity of carboxyethylgermanium sesquioxide in rats. During six months, male and female animals received 1 g kg^?1. day^?1. No particular toxic symptoms, and no behaviour problems except a small decrease of body weight in male rats, at the end of the six-month experimentation period, were observed. A significant decrease of erythropoiesis and some significant changes in leucocyte ratios were demonstrated. The main marked effect was a moderate renal dysfunction characterized by a tubular disease with the presence of cylinders, swelling of tubulus cells and flocculus deposits. Germanium urinary excretion was constant and linked to the received dose. Six months later, no preferential accumulation in organs was evident.     

Mössbauer gamma echo

By applying stepwise phase modulation of recoilless gamma radiation in a coincidence experiment, constructive interference is produced in transmission geometry between the source and the absorber fields. The resulting regenerated decay signal is called a gamma echo. Here it is demonstrated that during the decay of the 14.4 keV state of⁵⁷Fe multiple echo signals can be generated.     

High temperature stability of maghemite in partially oxidized basalt lava

Mössbauer spectroscopy of basalt lava samples, exhibiting reversible thermal magnetization (J_S-T) curves with Curie temperatures of about 580°C, has revealed considerable amounts of maghemite (γ-Fe₂O₃) in many samples. In view of the expected instability, of maghemite at temperatures above 350°C, this reversibility is rather surprising. Here we report Mössbauer studies on heated lava samples, showing high content of maghemite. The samples were kept at 600°C in oxidizing, reducing, and inactive atmospheres, respectively, for different lengths of time, and then analyzed with Mössbauer spectroscopy at room temperature. The Mössbauer spectra showed that maghemite is stable in the oxidizing atmosphere for at least several hours. In the inactive atmosphere a considerable amount of maghemite still exists after two hours heating. In the reducing atmosphere maghemite had transformed to magnetite after only 30 minutes.     

Circular beam emission from 1.3 μm InGaAsPstrained-multiquantum-well lasers

The beam divergence in the vertical direction from a graded index separate confinement heterostructure (GRINSCH) multiquantum-well (MQW) laser has been studied. It is demonstrated both theoretically and experimentally that a circular beam MQW laser can be produced by choosing appropriate thicknesses for the GRINSCH layers, while maintaining other desired laser characteristics. The beam divergence is found to be more affected by the index change induced by injected carriers than by strain in the MQW active layer. Theoretical results are in good agreement with the measurements for 1.3-μm InGaAsP strained MQW lasers     

Ultralow-Dielectric-Constant foams by crystallisation from supercritical solution: Application to advanced electronic packaging

Accurate moulding of polymer foams of density 0.02–0.3 g cm^?3 has been achieved by crystallising polyethylene and ethylene/methlacrylate copolymers from dry supercritical solutions. Adherent thick films can be sealed to electronic substrates and are proposed as insulating layers for interconnections on multichip modules and other high-speed electronic devices. The dielectric constant achieved for films of several-mil thickness is between 1.05 and 1.3 and can be tailored along with the physical properties of the film by adjusting the density and composition of the copolymer. Planarisation or complex patterning is possible by detailing the mould.     

All-optical photonic switches using integrated inverted asymmetricFabry-Perot modulators and heterojunction phototransistors

InGaAs/GaAs(100) multiple-quantum-well-based inverted cavity asymmetric Fabry-Perot modulators are vertically integrated with GaAs/AlGaAs heterojunction phototransistors to yield all-optical photonic switches. The photonic switches using `normally on' modulator pixels exhibit an output on-off ratio of 12:1 with internal optical gain of 4 dB. The photonic switches using `normally off' modulator pixels yield similar contrast and gain, but exhibit intrinsic bistable behavior. The inverted cavity modulators employed permit utilizing the transparency of the GaAs substrate at the operating wavelength and offer advantages for fabricating large arrays for optical signal processing     

Towards an Operational Model for Prevention and Treatment of Asthma Attacks

Asthma is one of the major chronic diseases in many countries. At present there is no cure for asthma, but medical advances can help to reduce the chances of attacks of the condition. Efficient care for asthma involves complexity, uncertainty, variability and the use of scarce resources, and these are the same conditions that indicate a possible use for the modelling approach of operational research. This paper is concerned with a pilot model that was developed through joint work by medical professionals and operational researchers. The development of the model is explained and illustrative results indicate the potential value of the modelling approach for the care of asthma in the community.     

Determination of tributyltin oxide in coastal marine sediments and mussels by electrothermal atomic absorption spectrometry

We have devised a new method for bis(tributyltin)oxide (TBTO) determination in marine sediments and mussels. This technique involves an n-hexane/methylene chloride mixture extraction and extract purification with a sodium hydroxide wash in order to eliminate interfering compounds. TBTO is then extracted again by nitric acid and converted into an inorganic tin species; the analysis has been effected using Zeeman graphite furnace-atomic absorption spectrophotometry. The method detection limit for the matrices examined is 0.004 μg TBTO g^?1 (wet weight) and is sufficient for the analysis in real samples. The percentage recovery of TBTO from sediments and mussels samples is higher than 85% and 95% respectively. This method has been applied to TBTO level determination in sediments and mussels (Mytilus galloprovincialis) sampled in the harbour area in Taranto, where mussel culture activities are much developed; the TBTO levels obtained in sediments and mussels were in the range 15-47 ng g^?1 (wet weight) and 11-30 ng g^?1 (wet weight) respectively. Such values are comparable with those found in other harbour areas in the Mediterranean Sea.     

Certification of the sulphur content of three rapeseed reference materials

Summary The sulphur content of three rapeseed reference materials has been certified on the basis of measurements made by inductively coupled plasma-optical emission spectroscopy, isotope-dilution mass spectrometry and ion chromatography. Their suitability for the calibration of x-ray fluorescence spectrometers used for measuring sulphur in rapeseed samples was established.