Modulational instability and parametric amplification induced by loss dispersion in optical fibers

We show that modulational instability may arise even in the normal group-velocity dispersion regime of an optical fiber when the fiber loss (gain) varies depending on the wavelength. A simple analytical expression for the instability gain is obtained, which reveals that the odd-order terms of the loss dispersion are responsible for this phenomenon. The instability gain is measured experimentally in an optical-parametric-amplification configuration. Large parametric gain is induced in a non-phase-matched regime as we apply narrow band loss at the idler wavelength.     

Polarization-mode dispersion measurement by an optical time-domain reflectometer with polarimetry assuming backscattering by randomly oriented nonspherical particles

In previous work on polarization-mode dispersion (PMD) measurement with an optical time-domain reflectometer with polarimetry (p-OTDR), scatterers were assumed to be a cloud of small spherical particles in a fiber. We have found that the p-OTDR waveforms were fitted well by modified Mueller matrices, assuming scattering by a cloud of nonspherical particles. We realized a PMD measurement based on the p-OTDR Jones matrix eigenanalysis (JME) method. The measured PMD was consistent with that of JME standard measurement with transmission-type polarimetry.     

Porphyrin hetero-dimer as charge separating system for photocurrent generation

Introducing a porphyrin bearing electron acceptor onto a self-assembled monolayer (SAM) using a supramolecular method to form a hetero-dimer increased the photocurrent value compared with using porphyrin without an electron acceptor.     

Deodorisation effect of diamond-like carbon/titanium dioxide multilayer thin films deposited onto polypropylene

Many types of plastic containers have been used for the storage of food. In the present study, diamond-like carbon (DLC)/titanium oxide (TiO₂) multilayer thin films were deposited on polypropylene (PP) to prevent flavour retention and to remove flavour in plastic containers.For the flavour removal test, two types of multilayer films were prepared, DLC/TiO₂ films and DLC/TiO₂/DLC films. The residual gas concentration of acetaldehyde, ethylene, and turmeric compounds in bottle including the DLC/TiO₂-coated and the DLC/TiO₂/DLC-coated PP plates were measured after UV radiation, and the amount of adsorbed compounds to the plates was determined. The percentages of residual gas for acetaldehyde, ethylene, and turmeric with the DLC/TiO₂ coated plates were 0.8%, 65.2% and 75.0% after 40 h of UV radiation, respectively. For the DLC/TiO₂/DLC film, the percentages of residual gas for acetaldehyde, ethylene and turmeric decreased to 34.9%, 76.0% and 85.3% after 40 h of UV radiation, respectively. The DLC/TiO₂/DLC film had a photocatalytic effect even though the TiO₂ film was covered with the DLC film.     

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.     

Evaluation of ionic pollutants of acid fog and rain using a factor analysis and back trajectories.

Fog and rain water samples were collected at the same time in the Akita Hachimantai mountain range in northern Japan from June to September in 1998 and 1999. The various ion concentrations in these samples were analyzed, and the fog droplet sizes were measured for each fog event. As the fog droplet size increased, the ion concentration decreased. The slope of log-log plots of the concentration versus the droplet size differed with the kind of ion. In order to characterize the air pollutant, moreover, these data were quantitatively analyzed by an oblique rotational factor analysis. We found that three factors were extracted as the air pollutant source: (NH4)2SO4, acids (HNO3 + H2SO4) and sea-salt. Combining the factor analysis with the 72 h back-trajectory at 850 hPa level, we found that the contribution of each factor varied with the transport pattern of air masses.