Compact,wide aperture X-ray preionized XeCl laser with high specific optical power

An X-ray preionized, discharge-pumped XeCl laser with a variable beam cross-section of up to 6×6 cm² is described. It uses flat electrodes and the beam width is determined by X-ray collimation. Its operation characteristics concerning reduced electric field strength (E/p) and X-ray dose are discussed in detail. The inductance of the discharge loop is minimized using a water capacitor arrangement. A very high specific optical power (90 MW/l) is achieved in an active volume of 1.2 l. The pulse energy exceeds 5 J in a 45 ns pulse (FWHM). Komatsu Ltd., Manda 1200, Hiratsuka-shi, Kanagawa 254, Japan Institute of Optics and Fine Mechanics, Department of Plasma Physics, Academia Sinica, Shanghai, P.R. China     

Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Nanoscale organization of the pathogen receptor DC-SIGN mapped by single-molecule high-resolution fluorescence microscopy.

DC-SIGN, a C-type lectin exclusively expressed on dendritic cells (DCs), plays an important role in pathogen recognition by binding with high affinity to a large variety of microorganisms. Recent experimental evidence points to a direct relation between the function of DC-SIGN as a viral receptor and its spatial arrangement on the plasma membrane. We have investigated the nanoscale organization of fluorescently labeled DC-SIGN on intact isolated DCs by means of near-field scanning optical microscopy (NSOM) combined with single-molecule detection. Fluorescence spots of different intensity and size have been directly visualized by optical means with a spatial resolution of less than 100 nm. Intensity- and size-distribution histograms of the DC-SIGN fluorescent spots confirm that approximately 80 % of the receptors are organized in nanosized domains randomly distributed on the cell membrane. Intensity-size correlation analysis revealed remarkable heterogeneity in the molecular packing density of the domains. Furthermore, we have mapped the intermolecular organization within a dense cluster by means of sequential NSOM imaging combined with discrete single-molecule photobleaching. In this way we have determined the spatial coordinates of 13 different individual dyes, with a localization accuracy of 6 nm. Our experimental observations are all consistent with an arrangement of DC-SIGN designed to maximize its chances of binding to a wide range of microorganisms. Our data also illustrate the potential of NSOM as an ultrasensitive, high-resolution technique to probe nanometer-scale organization of molecules on the cell membrane.     

Binding of single nucleotides to H+-ATP synthases observed by fluorescence resonance energy transfer

F(0)F(1)-ATP synthases couple proton translocation with the synthesis of ATP from ADP and phosphate. The enzyme has three catalytic nucleotide binding sites, one on each beta-subunit; three non-catalytic binding sites are located mainly on each alpha-subunit. In order to observe substrate binding to the enzyme, the H(+)-ATP synthase from Escherichia coli was labelled selectively with the fluorescence donor tetramethylrhodamine (TMR) at position T106C of the gamma-subunit. The labelled enzymes were incorporated into liposomes and catalysed proton-driven ATP synthesis. The substrate ATP-Alexa Fluor 647 was used as the fluorescence acceptor to perform intermolecular fluorescence resonance energy transfer (FRET). Single molecules are detected with a confocal set-up. When one ATP-Alexa Fluor 647 binds to the enzyme, FRET can be observed. Five stable states with different intermolecular FRET efficiencies were distinguished for enzyme-bound ATP-Alexa Fluor 647 indicating binding to different binding sites. Consecutive hydrolysis of excess ATP resulted in stepwise changes of the FRET efficiency. Thereby, gamma-subunit movement during catalysis was directly monitored with respect to the binding site with bound ATP-Alexa Fluor 647.     

Synthesis,crystal structures and electrochemical properties of group 6 metal carbonyl anion complexes

A series of [M(CO)₅I]⁻ and [M₂(CO)₁₀I]⁻ anion complexes have been synthesized by the photochemical reaction of PhCH₂N(CH₃)₃I or FcCH₂N(CH₃)₃I (Fc=ferrocenyl) with M(CO)₆ (M = Cr, Mo or W), and characterized by elemental analyses, i.r., ¹H-n.m.r. and ¹³C-n.m.r. spectra in the case of the molybdenum and tungsten complexes. These complexes exhibit considerably different electrochemical behavior, when investigated by cyclic voltammetry. The crystal structures of [PhCH₂N(CH₃)₃][Cr(CO)₅I] and [FcCH₂N(CH₃)₃][W₂(CO)₁₀I] have been determined by X-ray diffraction, indicating that only weak contacts maybe exist between anions and cations by the I...H bond in the former, and there are no direct interactions between anions and cations in the latter.     

Transition metal complexes with Girard reagent-based ligands

The ligand, salicylaldehyde Girard-T hydrazonium chloride, [H₂SalGT]Cl (1), and two complexes [Cu(HSalGT)X₂]·H₂O (X = Br(2); Cl(3)) were synthesized and their crystal structures were determined by single-crystal X-ray analysis. In the two isostructural complexes, the Cu(II) is located in a square-pyramidal environment, with the chelating ligand and one halogen atom in the basal plane and the second halogen in the apical position. The most apparent structural difference between the 1 and its complexes 2 and 3 is the orientation of the N(CH₃)₃ group: in 1, it is practically coplanar to the rest of the molecule, while in 2 and 3 it is oriented to the side of the axially bonded halogen, which can be explained by the C–H…X intramolecular interactions. The compounds were characterized by elemental analysis, molar conductivity, magnetic susceptibility and electronic absorption spectra.     

Synthesis,crystal structure and ferro-magnetic interaction of a binuclear copper(II) complex with the 1,4-dinitro-2,3,5,6-tetracarboxylatobenzenic anion as bridging ligand

A binuclear complex [Cu₂(DTB)(DMF)₄(H₂O)]·2DMF (DTB = 1,4-dinitro-2,3,5,6-tetracarboxylatobenzenic anion; DMF = N,N-dimethylformamide) has been synthesized and its crystal structure determined by X-ray crystallography. In the complex Cu ion is located in a distorted square pyramidal environment with two oxygen atoms O(1) and O(3) from two carboxylate groups, another two oxygen atoms O(7) and O(8) from terminal ligands of two DMF molecules, and a fifth coordinated oxygen atom O(9) from the terminal ligand of one H₂O molecule, in which the O(8) atom is situated in the apex of the pyramid. DTB as bridging ligand coordinates two Cu ions through its four carboxylate groups. The variable-temperature magnetic susceptibility of the complex was measured in the 5–300 K range. The magnetic coupling parameter is consistent with a ferromagnetic exchange between the two copper(II) centers and the data fit a binuclear magnetic exchange model based on the Hamiltonian operator ( = -2J₁₂, ₁ = ₂= 1/2), giving the ferromagnetic coupling parameter of 2J = 1.80 cm^{- 1}. This is the first example of a tetracarboxylatobenzenic bridging complex exhibiting ferromagnetic interaction.     

Reactions of sulfur(IV) with an octahedral manganese(IV) complex of 1,8-bis(2-hydroxy benzamido)-3,6-diaza octane: the role of phenolate–amide–amine coordination

The Mn^IV complex of tetra-deprotonated 1,8-bis(2-hydroxybenzamide)-3,6-diazaoctane (Mn^IVL) engrossed in phenolate-amido-amine coordination is reduced by HSO₃⁻ and SO₃²⁻ in the pH range 3.15–7.3 displaying biphasic kinetics, the Mn^IIIL⁻ being the reactive intermediate. The Mn^IIIL⁻ species has been characterized by u.v.–vis. spectra {λ _max, (ε, dm³ mol⁻¹ cm⁻¹): 285(15 570), 330 sh (7570), 469(6472), 520 sh (5665), pH=5.42}. SO₄²⁻ was the major oxidation product of S^IV; dithionate is also formed (18 ± 2% of [Mn^IV]_T) which suggests that dimerisation of SO₃^−• is competitive with its fast oxidation by Mn^IV/III. The rates and activation parameters for Mn^IVL + HSO₃⁻ (SO₃²⁻) → Mn^IIIL⁻; Mn^IIIL⁻ + HSO₃⁻ (SO₃²⁻) → Mn^IIL²⁻ are reported at 28.5–45.0 °C (I=0.3 mol dm⁻³, 10% (v/v) MeOH + H₂O). Reduction by SO₃²⁻ is ca. eight times faster than by HSO₃⁻ both for Mn^IVL and Mn^IIIL⁻. There was no evidence of HSO₃⁻/SO₃²⁻ coordination to the Mn centre indicating an outer sphere (ET) mechanism which is further supported by an isokinetic relationship. The self exchange rate constant (k₂₂) for the redox couple, Mn^IIIL⁻/Mn^IVL (1.5 × 10⁶ dm³ mol⁻¹ s⁻¹ at 25 °C) is reported.     

Inductively coupled plasma compared with direct current arc spectrometry for analysis of minor elements in aluminium baths

A validation study was carried out in order to evaluate the efficiency of inductively coupled plasma-optical emission spectrometry (ICP-OES) for the analysis of minor elements (manganese, chromium, copper, iron, and titanium) in aluminium alloys. Aluminium casting samples were obtained by adding compressed powder compacts of each alloying element and aluminium (minitablets) to aluminum baths in a laboratory crucible furnace. Digestion of solid samples was performed using concentrated HCI and H202 35% (v/v) previous to analysis by ICP-OES without any matrix separation. This solution-based method was validated considering direct current arc spectrometry as the reference method based on direct analysis without any pretreatment of the solid samples considered. Univariate statistical procedures were carried out, for which precision <3% and trueness of the analytical results were taken into account.     

Thermal decomposition of the composite hydrotalcites of iowaite and woodallite

The thermal stability and thermal decomposition pathways for synthesized composite iowaite/woodallite have been determined using thermogravimetry analysis in conjunction with evolved gas mass spectrometry. Dehydration of the hydrotalcites occurred over a range of 56–70°C. The first dehydroxylation step occurred at around 255°C and, with the substitution of more iron(III) for chromium(III) this temperature increased to an upper limit of 312°C. This trend was observed throughout all decomposition steps. The release of carbonate ions as carbon dioxide gas initialised at just above 300°C and was always accompanied by loss of hydroxyl units as water molecules. The initial loss of the anion in this case the chloride ion was consistently observed to occur at about 450°C with final traces evolved at 535 to 780°C depending of the Fe:Cr ratio and was detected as HCl (m/z=36). Thus for this to occur, hydroxyl units must have been retained in the structure at temperatures upwards of 750°C. Experimentally it was found difficult to keep CO₂ from reacting with the compounds and in this way the synthesized iowaite-woodallite series somewhat resembled the natural minerals.