Theoretical studies on the structures, heats of formation, energetic properties and pyrolysis mechanisms of nitrogen-rich difurazano[3,4-b:3′,4′-e]piperazine derivatives and their analogues

The molecular structure, heats of formation, energetic properties, strain energy and thermal stability for a series of substituted difurazano[3,4-b:3′,4′-e]piperazines and their analogues were studied using density functional theory. The results show that it is a useful way to increase the heat of formation values of energetic compounds by incorporating a five- or six-membered aromatic heterocycle to construct a fused ring system. The calculated detonation properties reveal that introducing one heterocycle to construct a fused ring structure greatly enhances their detonation properties. The substitution of the –NF₂, –NO₂ or –NHNO₂ group is very useful for enhancing the detonation performance for the substituted derivatives. According to molecular structure and natural bond orbital analysis, the introduction of the –NO₂, –NF₂ or –NHNO₂ group decreases the stability of the substituted derivative. There is a weak N–NO₂ bond conjugation in the NO₂-substituted derivatives. An analysis of the bond dissociation energies for several relatively weak bonds suggests that all the unsubstituted derivatives have good thermal stability, but the substitution of –NO₂ or –NF₂ remarkably decreases their stability. Considering the detonation performance and thermal stability, eight compounds may be considered as the potential candidates of high-energy density materials with less sensitivity.     

Natural products and their derivatives as G-quadruplex binding ligands

G-quadruplexes comprise a class of secondary structures that are formed in guanine-rich sequences in eukaryotic genomes and play a crucial role in the regulation of many biological events. G-quadruplexes have become targets for anticancer drugs with high selectivity vs. duplex DNA and low cytotoxicity against normal cells. Natural products and their derivatives display polymorphism, structural complexity, and potent activity. It is, therefore, reasonable to seek ligands targeting G-quadruplexes from natural products. Recently, many successful examples have been reported, showing ligands with excellent anticancer activities. In this review, we summarized the development of research on natural products and derivatives that target G-quadruplex structures in an effort to guide future studies.     

Synthesis and Crystal Structure of Two Succinato‐Bridged Macrocyclic Nickel(II) Complexes

Two dinuclear succinato‐bridged nickel(II) complexes [Ni(RR‐L)]₂(μ‐SA)(ClO₄)₂ ( 1 ) and [Ni(SS‐L)]₂(μ‐SA)(ClO₄)₂ ( 2 ) (L = 5, 5, 7, 12, 12, 14‐hexamethyl‐1, 4, 8, 11‐tetraazacyclotetradecane, SA = succinic acid) were synthesized and characterized by EA, Circular dichroism (CD), as well as IR and UV/Vis spectroscopy. Single crystal X‐ray diffraction analyses revealed that the Ni^II atoms display a distorted octahedral coordination arrangement, and the succinato ligand bridges two central Ni^II atoms in a bis bidentate fashion to form dimers in 1 and 2 . The monomers of {[Ni(RR‐L)]₂(μ‐SA)}²⁺ and {[Ni(SS‐L)]₂(μ‐SA)}²⁺ are connected by O–H ··· O and N–H ··· O hydrogen bonds into a 1D right‐handed and left‐handed helical chain along the b axis, respectively. The homochiral natures of 1 and 2 are confirmed by the results of CD spectroscopy.     

Tribological behaviors of a novel trilayer nanofilm: the influence of outer chain length and interlayer thickness

Polydopamine (coded as PDA) is reported to be very adhesive and reactive due to the attached functional groups, such as amine and hydroxyl groups. In this work, taking advantage of the condensation between Si–OH of the hydroxylated alkyltrichlorosilane (ATS) and C–OH on PDA surface, ATS molecules with different chain carbon number of 10, 14 and 18 were grafted onto the 3‐aminopropyl triethoxysilane (APTES)‐PDA dual‐layer film, which was composed of PDA outerlayer and APTES underlayer, on Si substrate. Thus, hydrophobic trilayer films coded as APTES‐PDA‐ATS were prepared successfully. In order to reveal the dependence of the tribological behaviors upon the microstructures of the film, tribological experiments were conducted on an atomic force microscope and a ball‐on‐plate tribometer. Experimental results showed that the (micro‐) friction reducing (characterized by a parameter of relative friction coefficient or friction coefficient, RFC or FC) and macro‐wear resisting (characterized by anti‐wear life) behaviors were related with the chain length of outerlayer and the PDA thickness. Specifically, on one hand, as the chain length increases, RFC/FC decreased and macro anti‐wear life lengthened; on the other hand, as PDA gets thicker, RFC increased and the anti‐wear life enhanced. Copyright © 2013 John Wiley & Sons, Ltd.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

The ambient gamma dose-rate and the inventory of fission products estimations with the soil samples collected at Canadian embassy in Tokyo during Fukushima nuclear accident

In this study, soil samples were collected at Canadian embassy in Tokyo (about 300 km from Fukushima) on 23 March and 23 May of 2011 for purposes of estimating concentrations of radionuclides in fallout, the total fallout inventory, the depth distribution of radionuclide of interest and the elevated ambient gamma dose-rate at this limited location. Some fission products and actinides were analyzed using gamma-ray spectrometry, alpha spectrometry and liquid scintillation counting. The elevated activity concentration levels of ¹³¹I, ¹³²I, ¹³⁴Cs, ¹³⁷Cs, ¹³⁶Cs, ¹³²Te, ¹²⁹mTe, ¹²⁹Te, ¹⁴⁰Ba and ¹⁴⁰La were measured by the gamma-ray spectrometer in the first sample collected on 23 March. Two months after the accident, the ¹³⁴Cs and ¹³⁷Cs became only detectable nuclides. A mass relaxation depth of 3.0 g/cm² was determined by the activities on the depth distribution of ¹³⁷Cs in a soil core. The total fallout inventory was thus calculated as 225 kBq/m² on March sampling date and 25 kBq/m² on May sampling date. The ambient gamma dose-rates in the sampling area estimated by the fallout fission products inventory and ¹³⁷Cs depth distribution ranged from 184 to 38 nGy/h. There was no detectable americium or plutonium in the soil samples by alpha spectrometry. Although ⁹⁰Sr or ⁸⁹Sr were detected supposedly as a result of this accident, it was less than the detection limit, which was about 0.4 Bq/kg in the soil samples.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Facile Surfactant-, Reductant-, and Ag Salt-free Growth of Ag Nanoparticles with Controllable Size from 35 to 660 nm on Bulk Ag Materials

Morphologically and dimensionally controlled growth of Ag nanocrystals has long been plagued by surfactants or capping agents that complicate downstream applications, unstable Ag salts that impaired the reproducibility, and multistep seed injection that is troublesome and time-consuming. Here, we report a one-pot electro-chemical method to fast (∼2 min) produce Ag nanoparticles from commercial bulk Ag materials in a nitric acid solution, eliminating any need for surfactants or capping agents. Their size can be easily manipulated in an unprecedentedly wide range from 35 to 660 nm. Furthermore, the Ag nanoparticles are directly grown on the Ag substrate, highly desirable for promising applications such as catalysis and plasmonics. The mechanistic studies reveal that the concentration of Ag⁺ in the diffusion layer nearby the surface, controlled by the magnitude and duration of voltage, is critical in governing the nanoparticle formation (<1.3 mM) and its dimensional adjustability.     

Evolution of the electronic structure of 1T-Cu(x)TiSe(2)

The electronic structure of a new charge-density-wave system or superconductor, 1T-Cu(x)TiSe(2), has been studied by photoemission spectroscopy. A correlated semiconductor band structure is revealed for the undoped case, which resolves a long-standing controversy in the system. With Cu doping, the charge-density wave is suppressed by the raising of the chemical potential, while the superconductivity is enhanced by the enhancement of the density of states, and possibly suppressed at higher doping by the strong scattering.