Realisation and metrological characterisation of thickness standards below 100 nm

High-accuracy film thickness measurements in the range below 100 nm can be made by various complex methods like spectral ellipsometry (SE), scanning force microscopy (SFM), grazing incidence X-ray reflectometry (GIXR), or X-ray fluorescence analysis (XRF). The measurement results achieved with these methods are based on different interactions between the film and the probe. A key question in nanotechnology is how to achieve consistent results on a level of uncertainty below one nanometre with different techniques.Two different types of thickness standards are realised. Metal film standards for X-ray techniques in the thickness range 10 to 50 nm are calibrated by GIXR with monochromatised synchrotron radiation of 8048 eV. The results obtained at four different facilities show excellent agreement. SiO₂ on Si standards for SE and SFM in the thickness range 6 to 1000 nm are calibrated by GIXR with monochromatised synchrotron radiation of 1841 eV and with a metrological SFM. Consistent results within the combined uncertainties are obtained with the two methods. Surfaces and interfaces of both types of standards are additionally investigated by transmission electron microscopy (TEM). PACS 61.10.Kw; 68.55.Jk; 06.20.Fn; 06.60.Mr; 07.79.Lh     

Effective-field theory and the nuclear many-body problem

We review many-body calculations of the equation of state of dilute neutron matter in the context of effective-field theories of the nucleon-nucleon interaction.     

Limited resolution in complex network community detection with Potts model approach

According to Fortunato and Barthélemy, modularity-based community detection algorithms have a resolution threshold such that small communities in a large network are invisible. Here we generalize their work and show that the q-state Potts community detection method introduced by Reichardt and Bornholdt also has a resolution threshold. The model contains a parameter by which this threshold can be tuned, but no a priori principle is known to select the proper value. Single global optimization criteria do not seem capable for detecting all communities if their size distribution is broad.     

A supramolecular hydrogen‐bonded complex between 1,3,5‐tris(diisobutylhydroxysilyl)benzene and trans‐bis(4‐pyridyl)ethylene

The trisilanol 1,3,5‐(HOi‐Bu₂Si)₃C₆H₃ ( 7 ), prepared in three steps from 1,3,5‐tribromobenzene via the intermediates 1,3,5‐(Hi‐Bu₂Si)₃C₆H₃ ( 8 ) and 1,3,5‐(Cli‐Bu₂Si)₃C₆H₃ ( 9 ) forms an equimolar complex with trans‐bis(4‐pyridyl)ethylene (bpe), 7 ·bpe, whose structure was investigated by X‐ray crystallography. The hydrogen‐bonded network features a number of SiO? H(H)Si and SiO? H hydrogen bridges. Evidence was found for cooperative strengthening within the sequential hydrogen bonds. Copyright © 2007 John Wiley & Sons, Ltd.     

Scaled model measurements of embedding impedances for SIS waveguide mixers

Several scaled models have been used to determine the contributions of various waveguide mount parameters to the embedding impedance of a mm-wave SIS mixer. Measured effects of waveguide height, substrate orientation and width, junction location, lead inductance and RF-filter impedance are presented and discussed.     

Properties of (InGa)As/GaAs QW (λ ≈ 1.2 µm) facet-coated edge emitting diode laser

In this paper, we report on the design and optical properties of laser diodes with an emission wave-length of ～1170 nm based on an (InGa)As/GaAs double quantum well active layer. The back and front facet of the laser diodes were coated with SiO_x dielectric films that influence the output optical power by enhancing or lowering the facet reflectivity. The measurements show improvement of the facet-coated laser diode properties in the threshold-current-density reduction along with light output power enhancement. Furthermore, a narrow far field pattern and high side mode suppression have been observed.     

Determination of Surface Functional Groups in Lignocellulosic Materials by Chemical Derivatization and ESCA Analysis

Simple and convenient methods for determining surface chemical composition of lignocellulosic materials are described. The methods are based on vapor phase fluorine surface derivatization with either trifluoro acetic anhydride (TFAA), tri-fluoro ethanol (TFE) or pentafluorophenyl hydrazine (PFPH) and subsequent Electron Spectroscopy for Chemical Analysis (ESCA). Model cellulosic surfaces with well defined functionalities were used to optimize the derivatization reaction conditions. Detection and accessibility of surface hydroxyl functional groups were investigated in cotton and regenerated cellulose as models. Carboxymethyl cellulose (CMC) was used as a model surface for detection and quantification of carboxylic acid groups. Theoretical conversion curves for derivatization reactions were calculated and used to evaluate the extent of the reactions on the model surfaces. It was found that the conversion was higher for the regenerated cellulose and CMC than for cotton. The protocols developed using the model surfaces were applied to a case study on wood fibers with different degrees of complexity, namely dissolving and chemithermomechanical (CTMP) pulp. Untreated and oxygen-plasma modified pulps were compared with respect to the surface composition of functional groups. According to the derivatization reactions, functionalities containing oxygen were significantly increased on the plasma-treated samples. The effect of the treatment was found to be dependent on the type of pulp. Fluorine derivatization is shown to be an unambiguous method for clear assessment of the chemical functionalities of cellulosic surfaces.     

Pomeron-Odderon interference effects in electroproduction of two pions

We study Pomeron-Odderon interference effects giving rise to charge and single-spin asymmetries in diffractive electroproduction of a pair. We calculate these asymmetries, originating from both longitudinal and transverse polarizations of the virtual photon, in the framework of QCD and in the Born approximation, in a kinematical domain accessible to HERA experiments. We predict a sizable charge asymmetry with a characteristic dependence on the invariant mass of the pair, which makes this observable very important for establishing the magnitude of the Odderon exchange in hard processes. The single-spin asymmetry turns out to be rather small. We briefly discuss future improvements of our calculations and their possible effects on the results. Received: 18 July 2002 / Published online: 25 October 2002     

Calculation of the Knight shift in palladium

The direct and the exchange core polarization (ECP) contributions of the conduction electrons to the Knight shift of palladium are evaluated. To obtain the wave functions for the conduction electrons and the partial densities of states at the Fermi surface a KKR energy band calculation was performed. The contributions of the core electrons to the Knight shift were determined by using the moment perturbation method (MP). Electron-electron interactions are taken into account by individual enhancement factors for thed ands electrons. The agreement between the theoretical results and the available experimental data is quite satisfactory.