Potentiometric titration of permanganate with resacetophenone oxime

Milligram amounts of permanganate can be titrated with resacetophenone oxime (4-acetylresorcinol oxime) as a reducing titrant in the presence of phosphoric acid (0.5 M). The stoichiometry between permanganate and the oxime is 3:1 (MnO₄^-:oxime). The titration is successful in the presence of large amounts of dichromate or vanadate or moderate amounts of cerium(IV).     

An investigation of the aggregation and water-air interfacial behaviour of a cationic tentacle molecule

The aggregation and air-water interface properties of a three-legged tentacle molecule tris (11-pyridinium undec-1-yl)benzene-1, 3, 5-tricarboxylate tribromide have been investigated by measurement of the molar conductance, , and equilibrium surface tensin,, over a wide range of bulk concentration (8×10^–6 – 0.3 M). In contrast to the single chain analogue, dodecyl pyridinium bromide, DDPB, the tentacle species shows no evidence for a conventional micellar transition in solutions up to 100 fold more concentrated than the critical micelle concentration of DDPB, though aggregation of small numbers of molecules cannot be excluded. The conductance behaviour suggests the occurrence of ion-pair (or higher) equilibria, which are likely to complicate the interpretation of the data. Also, in contrast to a previous tentacle molecule described in the literature, the present species is significantly surface active, and in the high concentration limit reduces to <30 mNm^–1, significantly lower than the values obtained for simple ionic amphiphiles. In this region the tentacle species seems to stand like a tripod at the water-air interface with both its hydrocarbon legs and its aromatic body lifted clear of the water surface. At much lower concentrations two small plateau regions in are apparent ( 60 and 52 mNm^–1). Here, the tentacle molecule occupies a much larger surface area, and seems to adopt a crab-like crouch with its aromatic body and polar ester substituents lowered into the water surface.     

Gas-phase on-line generation and infrared spectroscopic investigations of polyphosphazenes, (NPX2)3 where X=F, Cl and Br

Gas-phase infrared spectra of polyphosphazenes (phosphonitrilic halides trimer), (NPX2)3 where X=F, Cl and Br have been recorded. The molecules were generated for the first time by an on-line process using solid (NPCl2)3 as a precursor passed over heated sodium fluoride and potassium bromide at about 550 and 700 degrees C for (NPF2)3 and (NPBr2)3 production, respectively. The products were characterized by the infrared spectra of their vapors. The low-resolution gas-phase Fourier transform infrared spectra reported for the first time show strong bands centered at 1295, 1215 and 1200 cm-1, assigned to nu7(E'), in plane PN stretching mode of (NPX2)3, where X=F, Cl and Br, respectively.     

Synthesis and characterization of platinum(II) and (IV) complexes containing hexamethyleneimine ligand: crystal structure of [Pt(hexamethyleneimine)2(cyclobutanedicarboxylato)]·H2O

A series of new platinum(II) and platinum(IV) complexes of the type [Pt^II(HMI)₂X] (where HMI=hexamethyleneimine, X=dichloro, sulfato, 1,1-cyclobutanedicarboxylato [CBDCA], oxalato, methylmalonato, or tatronato) and [Pt^IV(HMI)₂Y₂Cl₂] (where Y=hydroxo, acetato, or chloro) were synthesized and characterized by infrared (IR) spectroscopy, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Among the complexes synthesized, [Pt^II(hexamethyleneimine)₂(1,1-cyclobutanedicarboxylato)]·H₂O was examined by single-crystal X-ray diffraction. The slightly distorted square planar coordination environment of the platinum metal includes the amino group of the hexamethyleneimine (HMI) molecule and the oxygen atoms of the carboxylato ligand. The cyclobutanedicarboxylic acid (CBDCA) molecule adopts six-member chelating rings with platinum. Hydrogen bonding plays an important part in holding the crystal lattice together.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

Oxidations with alkaline permanganate using monovalent thallium for the back-titration: Determination of iodate,iodide and ferrocyanide

Iodate, iodide, iodine and ferrocyanide can be estimated by oxidation with KmnO₄ in alkaline media; the excess is back-titrated with TI⁷. I^- and I₂ are oxidized to IO₄^- in the presence of Ba⁺² ions but only to IO₃^- in absence of such ions. The direct titration of IO₃^-, I^- with KmnO₄ proved valueless.Ferrocyanide is oxidized by KmnO₄ in alkaline solutions and MnO₂ is formed. In the presence of telluric acid and 0.025–0.1 N NaOH satisfactory results are obtained. Reduction of MnO₄^- with ferrocyanide gives MnO₄^-2 and the results are variable, depending on the rate of adding the ferrocyanide.     

Complexation of palladium cyanide with imidazolidine-2-thione and its derivatives

Summary Pd(CN)₂ reacts with imidazolidine-2-thione (Imt), 1,3-diazinane-2-thione(Diaz), 1,3-diazipnane-2-thione (Diap) and their derivatives to yield complexes of stoichiometry [PdL₂(CN)₂] or [PdL(CN)₂] (L = Imt, Diaz or Diap and L = Imt having N-Me, Et or Pr substituents), which were characterized by elemental analysis, i.r., ¹H and ¹³C n.m.r. spectroscopy. Both mono- and bis ligand complexes are thought to be square planar with the monoligand binding to metal via sulphur (bridging) and the bis ligand via the monodentate thione group. The ¹³C enriched Pd(¹³CN)₂ complex was prepared and the ¹³C n.m.r. recorded. The C-2 resonance of ¹³C n.m.r. of Imt, Diaz or Diap complexes of the copper(I), silver(I), gold(I) and palladium(II) were compared.     

HPTLC Procedure for Determination of Levonorgestrel in the Drug-Release Media of an In-situ-Forming Delivery System

JPC – Journal of Planar Chromatography – Modern TLC -     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).     

Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)

Biodegradable polyurethane elastomers with potential for applications in medical implants with tunable degradation rate and physical properties were synthesized from reaction of epoxy terminated polyurethanes (EUP) with 1,6-hexamethylene diamine (HMDA) as curing agent. Poly(ε-caprolactone) (PCL) and poly(ethylene glycol) (PEG) as well as 1,6-hexamethylene diisocyanate (HDI) were used for preparation of isocyanate terminated polyurethanes which were subsequently blocked with glycidol to prepare EUPs. All materials were characterized by conventional methods, and their properties were studied fully. Results showed that elastomers based on PEG exhibit superior degradation rate and inferior mechanical properties in comparison to elastomers based on PCL. Optimum degradation rate and mechanical properties were obtained from elastomers made from mixture of PCL and PEG base EUPs.