Planar chiral cyclic ether: asymmetric resolution and chirality transformation

Remarkably stable planar chirality was found in a nine-membered diallylic cyclic ether. Enantiomerically enriched ether was prepared by a kinetic resolution of a racemic one, which is valuable as a novel type of chiral building block.     

Melting behavior of highly stretched isotactic polypropylene film

Isotactic polypropylene film was stretched in poly(ethylene glycol) at 140°C and its melting behavior was investigated by using a differential scanning calorimeter (DSC-1B). The shape of the melting curve depends largely on the stretching ratio, v. A sample stretched to moderate extension (1 < v < 3.5–4) has only a single melting peak (163°C) in the thermogram. When the sample is stretched beyond v = 3.5–4, the thermogram becomes more and more complex with increase of v, and some peaks appear when stretched to 10 < v < 13. The lowest peak which is considered to be the melting peak of the intermolecular crystals produced by the unfolding of chain molecules in the lamellae develops gradually with increase of v. In the thermogram for v = 18 the lowest temperature peak is most pronounced, in contrast to the highest temperature peak which decreases markedly in intensity. The phenomenon shows that large amounts of lamellar crystals are converted to intermolecular crystals in this region. On further stretching (v > 20) a very sharp high temperature peak appears, whose half-width is about 1°C. Qualitatively similar results were obtained for the samples stretched in poly(ethylene glycol) at 150°C and in air at 140 and 150°C.     

Specific heat and neutron diffraction study on quaternary sulfides BaNd2CoS5 and BaNd2ZnS5

Magnetic and electrical properties are investigated for quaternary neodymium sulfides BaNd₂TS₅ (T=Co, Zn) through the specific heat, neutron diffraction, and electrical conductivity measurements. Their electrical conductivities show semiconductive behavior, which follows the Arrhenius temperature dependence with the activation energy of E_a=1.46 eV for BaNd₂ZnS₅ and E_a=1.19 eV for BaNd₂CoS₅. The specific heat of BaNd₂ZnS₅ has a λ-type anomaly at 2.8 K due to the antiferromagnetic ordering of the Nd³⁺ moments and a Schottky-type anomaly at around 60 K, which results from the crystal field splitting of the ⁴I_9/2 ground state of the Nd³⁺ ion. The specific heat of BaNd₂CoS₅ shows two λ-type anomalies at 5.7 K due to the antiferromagnetic ordering of Nd³⁺ and at 58 K due to the antiferromagnetic ordering of Co²⁺. The latter overlaps with the Schottky-type anomaly due to the crystal field splitting of the Nd³⁺ ion. Neutron diffraction measurements for BaNd₂CoS₅ show that a magnetic arrangement of the Co²⁺ moments has a collinear antiferromagnetic structure, while that of the Nd³⁺ moments has a noncollinear one.     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

Synthesis of benzimidazole derivatives as potential H1-antihistaminic agents

Several types of benzimidazole derivatives were prepared and were screened for H ₁-antihistaminic activity. Most of the compounds showed potent antihistaminic activity in vitro. Among them 2-[(1-piperazinyl)methyl]-benzimidazoles 14 and 2-[(1-homopiperazinyi)methyl]benzimidazoles 15 exhibited potent activity also in vivo.     

Properties of calcium-induced gel beads prepared with alginate and hydrolysates

Calcium-induced alginate gel beads (Alg-Ca) containing alginate hydrolysate, such as the guluronic acid block (GB), was prepared and the drug release profiles were investigated under simulated gastrointestinal conditions. The addition of GB to Alg-Ca altered its rheological properties. A model drug (hydrocortisone) was incorporated at 78% of its theoretical yield within the dried Alg-Ca containing 5% GB and it was gradually released from the beads in JP XIV 1st medium for disintegration test (pH 1.2), while it was rapidly released with disintegration of the gel matrix in JP XIV 2nd medium (pH 6.8). In contrast, for Alg-Ca containing GB and chitosan, disintegration was not observed in these media and the drug release rate was markedly different. These results demonstrate that the release profiles of drugs incorporated into Alg-Ca can be controlled by adding these polysaccharides.     

Highly diastereoselective chemoenzymatic synthesis of (2′R)- and (2′S)-2′-deoxy[2′-H]guanosines

In an effort to develop an efficient synthetic method of highly diastereoselective (2′R)- and (2′S)-2′-deoxy[2′-²H]guanosines, chemoenzymatic conversion was investigated. The synthesis of (2′R > 98% de)-2′-deoxy[2′-²H]guanosine was achieved by biological transdeoxyribosylation using (2′R > 98% de)-2′-deoxy[2′-²H]uridine, 2,6-diaminopurine, and Enterobacter aerogenes AJ-11125, followed by treatment with adenosine deaminase. (2′S > 98% de)-2′-Deoxy[2′-²H]guanosine was synthesized from (2′S > 98% de)-2′-deoxy[2′-²H]uridine and 2,6-diaminopurine using thymidine phosphorylase and purine nucleoside phosphorylase instead of E. aerogenes AJ-11125.     

Mechanisms and kinetics of noncatalytic ether reaction in supercritical water. 2. Proton-transferred fragmentation of dimethyl ether to formaldehyde in competition with hydrolysis

Noncatalytic reaction pathways and rates of dimethyl ether (DME) in supercritical water are determined in a tube reactor made of quartz according to liquid- and gas-phase 1H and 13C NMR observations. The reaction is studied at two concentrations (0.1 and 0.5 M) in supercritical water at 400 degrees C and over a water-density range of 0.1-0.6 g/cm3. The supercritical water reaction is compared with the neat one (in the absence of solvent) at 0.1 M and 400 degrees C. DME is found to decompose through (i) the proton-transferred fragmentation to methane and formaldehyde and (ii) the hydrolysis to methanol. Formaldehyde from reaction (i) is consecutively subjected to four types of redox reactions. Two of them proceed even without solvent: (iii) the unimolecular proton-transferred decarbonylation forming hydrogen and carbon monoxide and (iv) the bimolecular self-disproportionation generating methanol and carbon monoxide. When the solvent water is present, two additional paths are open: (v) the bimolecular self-disproportionation of formaldehyde with reactant water, producing methanol and formic acid, and (vi) the bimolecular cross-disproportionation between formaldehyde and formic acid, yielding methanol and carbonic acid. Methanol is produced through the three types of disproportionations (iv)-(vi) as well as the hydrolysis (ii). The presence of solvent water decelerates the proton-transferred fragmentation of DME; the rate constant is reduced by 40% at 0.5 g/cm3. This is caused by the suppression of low-frequency concerted motion corresponding to the reaction coordinate for the simultaneous C-O bond scission and proton transfer from one methyl carbon to the other. In contrast to the proton-transferred fragmentation, the hydrolysis of DME is markedly accelerated by increasing the water density. The latter becomes more important than the former in supercritical water at densities greater than 0.5 g/cm3.     

Flow-injection determination of copper(II) based on its catalysis on the redox reaction of cysteine with iron(III) in the presence of 1,10-phenanthroline

A redox reaction of cysteine with iron(III) proceeds slowly in the presence of 1,10-phenanthroline (phen). However, this reaction is accelerated in the presence of copper(II) as a catalyst, producing an iron(II)-phen complex (lambda(max)=510 nm). A sensitive spectrophotometric flow-injection method is proposed for the determination of copper(II) based on its catalytic action on this redox reaction. The dynamic range was 0.1-10 ng ml(-1) of copper(II) with a relative standard deviation of 1.0% (n=10) for 1.0 ng ml(-1) of copper(II) at a sampling rate of 30 h(-1). The detection limit (S/N=3) is 0.04 ng ml(-1). The proposed method was successfully applied to the determination of copper in river water as a certified reference material.     

Ring-opening polymerization of α,β-disubstituted oxiranes by α-methoxyphenylmethylium hexachloroantimonate

α-Methoxyphenylmethylium hexachloroantimonate was used as a novel initiator for the polymerization of α,β-disubstituted oxiranes such as cyclohexene oxide (CHO) and 2-butene oxide (trans and cis) (2-BO) at ?78°C with dichloromethane or dichloromethane-toluene mixtures as solvents. The CHO polymerization mixture became turbid and the polymer precipitated in dichloromethane. The CHO polymerization proceed quantitatively in dichloromethane–toluene mixtures. The molecular weight distribution of polyCHO obtained was bimodal regardless of the solvent used. The polymerization of trans-2-BO was heterogeneous in both dichloromethane and dichloromethane–toluene mixture. The polymerization mixtures of cis-2-BO were transparent but reached a limit yield which was less than the polymer yield of trans-2-BO. Furthermore, the microstructure of the poly2-BOs were analyzed by Vandenberg's method and the results confirmed Vandenberg's finding that inversion of configuration occurs in the propagation step.