Non-Sonogashira-type palladium-catalyzed coupling reactions of terminal alkynes assisted by silver(I) oxide or tetrabutylammonium fluoride

Palladium-catalyzed reaction of aryl and alkenyl halides with terminal alkynes in the presence of silver(I) oxide as an activator furnishes various arylated or alkenylated alkynes in good to excellent yields. The similar coupling reaction is also found to proceed using tetrabutylammonium fluoride (TBAF) or tetrabutylammonium hydroxide (TBAOH) as an activator.     

Total synthesis of brevetoxin-B

Brevetoxin-B (BTX-B), produced by the red tide organism, Gymnodium breve Davis, is the first member of marine polycyclic ethers to be structurally elucidated and one of the most potent neurotoxins. The structural feature is a trans-fused polycyclic ether ring system with 23 stereocenters. Its unique, complex structure and potent biological activity have attracted the attention of synthetic organic chemists. Total synthesis of BTX-B has been accomplished via the coupling of the ABCDEFG and IJK-ring segments, each ether ring of which was stereoselectively and efficiently constructed on the basis of SmI2-induced intramolecular cyclization, 6-endo-cyclization of hydroxy epoxide, ring-closing olefin metathesis, and SmI2-induced intramolecular Reformatsky-type reaction. Several kinds of double reactions at the left and right sides were efficiently used through the synthesis.     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Synthesis, crystal structure and thermoelectric properties of a new carbide Zr2[Al3.56Si0.44]C5

A new quaternary layered carbide, Zr₂[Al_3.56Si_0.44]C₅, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and thermopower and electrical conductivity measurements. The crystal structure was successfully determined using direct methods, and further refined by the Rietveld method. The crystal is trigonal (space group R3m, Z=3) with lattice dimensions of a=0.331059(5), c=4.09450(5) nm and V=0.38864(1) nm³. The final reliability indices calculated from the Rietveld refinement were R_wp=6.24%, R_p=4.21% and R_B=0.82%. The crystal structure is composed of electroconductive NaCl-type ZrC slabs separated by Al₄C₃-type [Al_3.56Si_0.44]C₃ layers. This material had thermoelectric properties superior to those of the ternary layered carbides Zr₂Al₃C₄ and Zr₃Al₃C₅, with the power factor reaching 7.6×10⁻⁵W m⁻¹ K⁻².     

Protonation-induced structural change of lyotropic liquid crystals in oley- and alkyldimethylamine oxides/water systems

Lyotropic phase behavior of the nonionic and the half-ionized oleyldimethylamine oxide (OlDMAO)/water systems was investigated using polarized light microscopy, small-angle X-ray diffraction, and differential scanning calorimetry. Nonionic OlDMAO formed isotropic micellar solution, nematic, hexagonal, cubic, and lamellar liquid crystalline phases as the surfactant concentration increased. In contrast, half-ionized OlDMAO (i.e., 1:1 mixture of the nonionic and the protonated species) had a greater tendency to form bilayer structures, and the phase diagram became quite similar to those of double-chained ionic surfactants rather than single-chained ones, despite the introduction of positive charges to the nonionic one. The preference of the bilayer structures in the half-ionized OlDMAO was interpreted in terms of the dimers stabilized by the hydrogen bond between the nonionic and protonated species. For alkyldimethylamine oxides with a saturated hydrocarbon chain (CnDMAO, chain length: n = 14, 16, and 18), the phase sequence of lyotropic liquid crystals was hardly affected by the protonation, but an elongation of the cylinders of the hexagonal phase was observed for the half-ionized C14DMAO. Consequently, it can be considered that the dominant bilayer formation of the half-ionized OlDMAO is attributed to the combined effect of the hydrogen-bonded dimer formation and the cis-double-bond configuration of the alkyl chain.     

Direct asymmetric organocatalytic Michael reactions of alpha,alpha-disubstituted aldehydes with beta-nitrostyrenes for the synthesis of quaternary carbon-containing products

[reaction: see text] Direct asymmetric catalytic Michael reactions have been performed using chiral-amine/acid bifunctional catalysts. Performed with 0.3 equiv of (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine and 0.3 equiv of trifluoroacetic acid as the catalyst, the reaction of alpha,alpha-dialkylaldehydes with (E)-beta-nitrostyrene provided the alpha,alpha-dialkyl Michael products in up to 96% yield with up to 91% ee. With respect to enantioselectivity, l-proline was a poor catalyst of this class of Michael reactions.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Studies on sustained-release suppositories. III. Rectal absorption of morphine in rabbits and prolongation of its absorption by alginic acid addition

Rectal absorption of morphine from various kinds of suppository bases was investigated. The extent of bioavailability of morphine by rectal administration varied with the bases used (30.5-97.5%), but every value was higher than that in the case of oral administration (13.5%). Witepsol bases were preferable to macrogol base for the rectal absorption of morphine. In particular, Witepsol S-55 or W-35 gave a higher plasma peak level than H-15 or E-75, whereas the difference in the mean residence times obtained from these bases could not be regarded as significant. Sustained-release suppositories of morphine could be prepared simply by mixing alginic acid (Alg) with morphine in a suppository base. Further, prolonged rectal absorption could be obtained by using these sustained-release suppositories, and the absorption rate was controlled by the amount of Alg added. It seems likely that the sustained release was due to the binding of morphine to Alg from the results of partition coefficient and binding ratio measurements in aqueous solution. The rapid initial absorption and the subsequent prolonged absorption of morphine simultaneously obtained from the morphine-Alg suppository may be useful in the clinical context.     

Diastereoselective synthesis of psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type dipeptide isosteres by organocopper-mediated anti-S(N)2' reaction

[reaction: see text] Acyclic psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type dipeptide isosteres were efficiently synthesized. In a key reaction, alpha-alkylation of gamma-mesyloxy-beta-methyl-alpha,beta-unsaturated esters with organocyanocuprates in diethyl ether or tetrahydrofuran preferentially afforded the psi[(E)-CH=CMe]- or psi[(Z)-CH=CMe]-isomer, respectively, via anti-S(N)2' mechanism.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.