Synthesis and Properties of Poly(Aryl Ether Ketone) Copolymers with Trifluoromethyl‐Substituted Benzene in the Side Chain

The new monomer (4‐(4′‐trifluoromethyl)phenoxyphenyl)hydroquinone (TFPOPH) was synthesized in a three‐step synthesis. A series of poly(aryl ether ketone) copolymers were prepared by the reaction of (4‐(4′‐Trifluoromethyl)phenoxyphenyl)hydroquinone and hydroquinone (HQ) with 4,4′‐difluorobenzophenone (DFB) in the presence of potassium carbonate in tretramethylene sulfone (TMS). Thermal analyses of the fluorinated copolymers showed that the glass transition temperature and 5.0% weight loss temperature are similar with that of PEEK, and the crystallinity decreased with increasing of TFPOPH. For the copolymer synthesized with the molar fraction of TFPOPH in the diphenol monomers (TFPOPH, HQ) being over 0.2, no cold crystallization temperature and melting temperature were detected, indicating that these copolymers are almost amorphous. The crystal structure of the copolymers with the molar fraction of TFPOPH being not higher than 0.2 is rhombic. The solubility in polar aprotic solvents of poly(aryl ether ketone)s copolymers increases and dielectric constant decreases step by step.     

乙醛酸和草酸的毛细管区带电泳分析

建立了同时测定乙醛酸和草酸的毛细管区带电泳法。考察了缓冲溶液的种类、浓度和pH以及分离电压等因素对分离结果的影响。在缓冲溶液为20 mmol/L硼砂-5.5 mmol/L邻苯二甲酸氢钾(pH 9.0)、分离电压20 kV、检测波长212 nm的优化条件下,11 min内即可实现对目标物的分离。乙醛酸和草酸分别在0.8～20 g/L和1.2～20 g/L范围内线性关系良好,相关系数分别为0.9993和0.9975;方法的检出限分别为0.2和0.4 g/L(信噪比为3);样品的加标回收率为98.3%～102.5%,相对标准偏差为0.35%～0.61%。该方法操作简便、快速、成本低廉,已应用于实际样品的分析,并获得了令人满意的结果。     

高效液相色谱法同时测定忍冬中7种成分

建立了在不同时间段内转换使用不同波长同时测定忍冬花和叶中7种化学成分(绿原酸、咖啡酸、芦丁、木犀草苷、异绿原酸A、异绿原酸B、异绿原酸C)的高效液相色谱分析方法,同时应用该方法分析了忍冬花、忍冬老叶和新叶中成分含量的差异。色谱柱为Agilent Eclipse Plus C18(250 mm×4.6 mm, 5 μm);流动相为0.3%甲酸水溶液(A)和乙腈(B),梯度洗脱,流速1 mL/min;采用VWD紫外检测器转换波长(330 nm、350 nm)检测。应用所建立的方法测定忍冬新叶中绿原酸、木犀草苷含量分别为2.572%、1.498‰,均比药典中规定的含量高,有必要进一步的研究和开发利用。该方法准确、简便、灵敏度高,适用于忍冬中7种化学成分含量的同时测定和忍冬的质量控制及综合评价。     

Theoretical insights into the aggregation-induced emission by hydrogen bonding: a QM/MM study

We investigate the excited-state decay processes for the 3-(2-cyano-2- phenylethenyl-Z)-NH-indole (CPEI) in the solid phase through combined quantum mechanics and molecular mechanics (QM/MM) and vibration correlation formalisms for radiative and nonradiative decay rates, coupled with time-dependent density functional theory (TDDFT). By comparing the isolated CPEI molecule and the molecule-in-cluster, we show that the molecular packing through intermolecular hydrogen-bonding interactions can hinder the excited-state nonradiative decay and thus enhance the fluorescence efficiency in the solid phase. Aggregation effect is shown to block the nonradiative decay process through hindering the low-frequency vibration motions. The fluorescence quantum yields for both isolated molecule and aggregation are predicted to be insensitive to temperature due to the hydrogen-bonding nature, and their values at room temperature are consistent with the experiment.     

Well‐Dispersed Pt Cubes on Porous Cu Foam: High‐Performance Catalysts for the Electrochemical Oxidation of Glucose in Neutral Media

The investigation of highly efficient catalysts for the electrochemical oxidation of glucose is the most critical challenge to commercialize nonenzymatic glucose sensors, which display a few attractive superiorities including the sufficient stability of their properties and the desired reproducibility of results over enzyme electrodes. Herein we propose a new and very promising catalyst: Pt cubes well‐dispersed on the porous Cu foam, for the the electrochemical oxidation reaction of glucose in neutral media. The catalyst is fabricated in situ on a homemade screen‐printed carbon electrode (SPCE) substrate through initially synthesizing the three‐dimensional (3D) porous Cu foam using a hydrogen evolution assisted electrodeposition strategy, followed by electrochemically reducing the platinic precursor simply and conveniently. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) proofs demonstrate that Pt cubes, with an average size (the distance of opposite faces) of 185.1 nm, highly dispersed on the macro/nanopore integrated Cu foam support can be reproducibly obtained. The results of electrochemical tests indicate that the cubic Pt‐based catalyst exhibits significant enhancement on the catalytic activity towards the electrooxidation of glucose in the presence of chloride ions, providing a specific activity 6.7 times and a mass activity 5.3 times those of commercial Pt/C catalysts at ?0.4 V (vs. Ag/AgCl). In addition, the proposed catalyst shows excellent stability of performance, with only a 2.8 % loss of electrocatalytic activity after 100 repetitive measurements.     

Simultaneous quantitation of seven alkaloids in processed Fuzi decoction by rapid resolution liquid chromatography coupled with tandem mass spectrometry

A rapid analytical method based on rapid resolution LC coupled with MS/MS was first established to quantify seven alkaloids in processed Fuzi decoction. The chromatographic method was optimized to allow simultaneous analysis of all analytes in 5 min and demonstrated good linearity (r > 0.9995), repeatability (RSD < 4.36%), intra‐ and interday precisions (RSD < 5.07%) with good accuracies (97.76–105.08%) and good recovery (95.0–107.5%) of seven alkaloids, namely higenamine, benzoylhypaconine, benzoylmesaconine, benzoylaconine, aconitine, hypaconitine, and mesaconitine. The LODs for these markers were in the range of 2.30–17.00 pg/mL. Quantitative analysis of the seven alkaloids in Baifupian decoction and Heishunpian decoction showed that the content of the seven marker chemicals varied significantly and concluded that the quality of Fuzi was greatly affected by different processed methods. The developed method could be used as a rapid, sensitive, and reliable approach for assessment of the quality of processed Fuzi and related decoction.     

Concurrent extraction,clean‐up,and analysis of polybrominated diphenyl ethers,hexabromocyclododecane isomers,and tetrabromobisphenol A in human milk and serum

A method has been developed and validated for the concurrent extraction, clean‐up, and analysis of polybrominated diphenyl ethers (PBDEs), α‐, β‐, and γ‐hexabromocyclododecane (HBCD), and tetrabromobisphenol A (TBBPA) in human milk and serum. Milk and serum samples were extracted using accelerated solvent extraction with acetone/hexane 1:1, v/v and liquid–liquid extraction with methyl‐tert‐butyl ether/hexane 1:1, v/v, respectively. The removal of co‐extracted biogenic materials was achieved by gel permeation chromatography followed by sulfuric acid treatment. The fractionation of the PBDEs and HBCD/TBBPA was performed using a Supelco LC‐Si SPE cartridge. The detection of the PBDEs was then performed by GC–MS and that of the HBCDs and the TBBPA was performed using UPLC–MS/MS. The pretreatment procedure was optimized, and the characteristic ions and fragmentation of the analytes were studied by MS or MS/MS. A recovery test was performed using a matrix spiking test at concentrations of 0.05–10 ng/g. The recoveries ranged from 78.6–108.8% with RSDs equal to or lower than 14.04%. The LODs were 1.8–60 pg/g. The usefulness of the developed method was tested by the analysis of real human samples, and several brominated flame retardants in different samples were detected and analyzed.     

Theoretical Study on the Hydrogen Bonding Interactions in Complexes of 5‐Hydroxytryptamine with Water

The energies, geometries and harmonic vibrational frequencies of 1:1 5‐hydroxytryptamine‐water (5‐HT‐H₂O) complexes are studied at the MP2/6‐311++G(d,p) level. Natural bond orbital (NBO), quantum theory of atoms in molecules (QTAIM) analyses and the localized molecular orbital energy decomposition analysis (LMO‐EDA) were performed to explore the nature of the hydrogen‐bonding interactions in these complexes. Various types of hydrogen bonds (H‐bonds) are formed in these 5‐HT‐H₂O complexes. The intermolecular C4H5^5‐HT···O^w H‐bond in HTW3 is strengthened due to the cooperativity, whereas no such cooperativity is found in the other 5‐HT‐H₂O complexes. H‐bond in which nitrogen atom of amino in 5‐HT acted as proton donors was stronger than other H‐bonds. Our researches show that the hydrogen bonding interaction plays a vital role on the relative stabilities of 5‐HT‐H₂O complexes.     

Visible‐Light‐Active Elemental Photocatalysts

Seeking visible‐light‐active photocatalysts for efficient solar‐energy conversion has become an intensifying endeavor worldwide. In this concept paper, general requirements for finding new visible‐light‐active photocatalysts are briefly introduced, and recent progress in exploring elemental photocatalysts for clean‐energy generation and environmental remediation are reviewed. Finally, opportunities and challenges facing elemental photocatalysts are discussed.     

Determination of Lead(II) Using Screen‐Printed Bismuth‐Antimony Film Electrode

This work presents a disposable bismuth‐antimony film electrode fabricated on screen‐printed electrode (SPE) substrates for lead(II) determination. This bismuth‐antimony film screen‐printed electrode (Bi‐SbSPE) is simply prepared by simultaneously in situ depositing bismuth(III) and antimony(III) with analytes on the homemade SPE. The Bi‐SbSPE can provide an enhanced electrochemical stripping signal for lead(II) compared to bismuth film screen‐printed electrodes (BiSPE), antimony film screen‐printed electrodes (SbSPE) and bismuth‐antimony film glassy carbon electrodes (Bi‐SbGC). Under optimized conditions, the Bi‐SbSPE exhibits attractive linear responses towards lead(II) with a detection limit of 0.07 µg/L. The Bi‐SbSPE has been demonstrated successfully to detect lead in river water sample.