Synthesis and Properties of Poly(Aryl Ether Ketone) Copolymers with Trifluoromethyl‐Substituted Benzene in the Side Chain

The new monomer (4‐(4′‐trifluoromethyl)phenoxyphenyl)hydroquinone (TFPOPH) was synthesized in a three‐step synthesis. A series of poly(aryl ether ketone) copolymers were prepared by the reaction of (4‐(4′‐Trifluoromethyl)phenoxyphenyl)hydroquinone and hydroquinone (HQ) with 4,4′‐difluorobenzophenone (DFB) in the presence of potassium carbonate in tretramethylene sulfone (TMS). Thermal analyses of the fluorinated copolymers showed that the glass transition temperature and 5.0% weight loss temperature are similar with that of PEEK, and the crystallinity decreased with increasing of TFPOPH. For the copolymer synthesized with the molar fraction of TFPOPH in the diphenol monomers (TFPOPH, HQ) being over 0.2, no cold crystallization temperature and melting temperature were detected, indicating that these copolymers are almost amorphous. The crystal structure of the copolymers with the molar fraction of TFPOPH being not higher than 0.2 is rhombic. The solubility in polar aprotic solvents of poly(aryl ether ketone)s copolymers increases and dielectric constant decreases step by step.     

Synthesis of Main‐Chain Liquid‐Crystalline Polyesters Containing Diphenyl Mesogens by Chemo‐Enzymatic Route †

Main‐chain thermotropic liquid‐crystalline polyesters containing rigid biphenyl mesogens and flexible spacers were synthesized by chemo‐enzymatic route. The enzyme‐catalyzed polymerization showed high regio‐ and chemo‐ selectivity, and is environmentally friendly. The resulting polyesters were characterized with ¹H‐NMR, ¹³C‐NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and polarized light optical microscopy (POM).     

Crystal Structure and Magnetic Property of a 2-D Hexa-Circular Ring Cu(II)/Na(I)-Substituted Sandwich-Type Arsenotungstate

A new compound H₈[NaCu₅Cl(H₂O)₃(B-α-AsW₉O₃₃)₂] 24H₂O (1) is synthetized by the reaction of the CuCl₂ 2H₂O and Na₂₇[NaAs₄W₄₀O₁₄₀] 60H₂O in aqueous solution, which is constructed from a {Cu₅Na} hexagon moiety sandwiched by two trilacunary [B-α-AsW₉O₃₃]^9? units. The structure is determined by single-crystal X-ray diffraction technique and further characterized by IR spectroscopy. Single-crystal X-ray diffraction analysis reveals that 1 is built by two trilacunary [B-α-AsW₉O₃₃]^9? units incorporating a {Cu₅Na} hexagon moiety and further linked to each other to form an infinitely extended 2-D network via Cu–O–W bridges. Notably, magnetic measurement demonstrates that the occurrence of intramolecular ferromagnetic Cu–Cu interactions within {Cu₅Na} hexagon moiety.     

Simultaneous quantitation of seven alkaloids in processed Fuzi decoction by rapid resolution liquid chromatography coupled with tandem mass spectrometry

A rapid analytical method based on rapid resolution LC coupled with MS/MS was first established to quantify seven alkaloids in processed Fuzi decoction. The chromatographic method was optimized to allow simultaneous analysis of all analytes in 5 min and demonstrated good linearity (r > 0.9995), repeatability (RSD < 4.36%), intra‐ and interday precisions (RSD < 5.07%) with good accuracies (97.76–105.08%) and good recovery (95.0–107.5%) of seven alkaloids, namely higenamine, benzoylhypaconine, benzoylmesaconine, benzoylaconine, aconitine, hypaconitine, and mesaconitine. The LODs for these markers were in the range of 2.30–17.00 pg/mL. Quantitative analysis of the seven alkaloids in Baifupian decoction and Heishunpian decoction showed that the content of the seven marker chemicals varied significantly and concluded that the quality of Fuzi was greatly affected by different processed methods. The developed method could be used as a rapid, sensitive, and reliable approach for assessment of the quality of processed Fuzi and related decoction.     

Simultaneous quantification of 11 isoquinoline alkaloids in Corydalis impatiens (Pall.) Fisch by HPLC

Isoquinoline alkaloids are the primary active ingredients of Corydalis, but an analytical method for quality assessment of the active ingredients in Corydalis impatiens (Pall). Fisch has not been reported. A new, simple, and multiple‐component quantification method was developed for the simultaneous quantification of 11 isoquinoline alkaloids including capnoidine, chelianthifoline, bicuculline, protopine, isoapocavidine, apocavidine, cavidine, tetrahydroepiberberine, ochotensimine, tetrahydrocoptisine, and tetrahydrocorysamine in C. impatiens. Separation of the isoquinoline alkaloids was performed on a RP C₁₈ column (150 × 4.6 mm, 5 μm) with potassium dihydrogen phosphate buffer (pH 2.5, adjusted by phosphoric acid)/acetonitrile (53:47, v/v) containing 0.3% sodium dodecyl sulfonate. The flow rate and detection wavelength were set at 1 mL/min and 295 nm, respectively. Full validation of the assay was carried out including linearity, precision, accuracy, stability, LOD, and limit of quantitation. All calibration curves showed a good linear relationship (r > 0.999) in test range. The results demonstrated that the developed method was reliable, rapid, and specific. Six batches of C. impatiens samples from different sources were determined using the established method. The contents of alkaloids ranged from 11.68 to 351.83 μg/g. This method can be applied for quality evaluation and control of C. impatiens. Eleven isoquinoline alkaloids were first reported on simultaneous determination with HPLC.     

A square‐pyramidal copper(II) complex with strong intramolecular hydrogen bonds: diaqua(N,N′‐dimethylformamide‐κO)bis[2‐(diphenylphosphoryl)benzoato‐κO]copper(II)

In the title Cu^II complex, [Cu(C₁₉H₁₄O₃P)₂(C₃H₇NO)(H₂O)₂], the molecule is bisected by a twofold axis relating the two 2‐(diphenylphosphoryl)benzoate (ODPPB) ligands. The asymmetric unit consists of a Cu^II metal centre on the symmetry axis, an ODPPB ligand, one water ligand and one dimethylformamide (DMF) ligand (disordered around the twofold axis). The Cu^II ion has fivefold coordination provided by two carboxylate O atoms from two ODPPB ligands, two O atoms from two coordinated water molecules and another O atom from a (disordered) DMF molecule, giving a CuO₅ square‐pyramidal coordination geometry. The ODPPB ligand adopts a terminal monocoordinated mode with two free O atoms forming two strong intramolecular hydrogen bonds with the coordinated water molecules, which may play a key role in the stability of the molecular structure, as shown by the higher release temperature for the coordinated water molecules than for the coordinated DMF molecule. The optical absorption properties of powder samples of the title compound have also been studied.     

A novel kind of dimmer (excimer)-induced-AIE compound 2-phenylisothiazolo[5,4-b]pyridin-3(2H)-one as high selective bisulfite anion probe

An interesting dimmer (excimer)-induced-AIE characteristic of 2-phenylisothiazolo[5,4-b]pyridin-3(2H)-one was observed. By using a ring-opening reaction, we developed a novel fluorescent probe based on sub-micron particles of 2-phenylisothiazolo[5,4-b]pyridin-3(2H)-one in water.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.