体积排阻色谱-电感耦合等离子体质谱分析富硒大米含硒蛋白组成

建立体积排阻色谱-电感耦合等离子体质谱(SEC-HPLC-ICP-MS)联用技术分析富硒大米含硒蛋白组成方法。通过水提、盐提、碱提和醇提方法提取,并用丙酮沉淀蛋白,硒的回收率分别为9.6%,16.8%,48.2%和14.9%,纯化后的蛋白结合硒的量由大到小依次为碱溶谷蛋白>球蛋白>醇溶蛋白>清蛋白。蛋白液经SEC-HPLC-ICP-MS检测,通过蛋白色谱峰(λ=280 nm)和ICP-MS硒峰(78Se)对比分析,利用分子量标准曲线测定出4类蛋白中含硒蛋白的分子量。结果表明,富硒大米中清蛋白和醇溶蛋白并不是硒的主要存在蛋白。硒主要存在于>7 kDa的碱溶谷蛋白和球蛋白,其中碱溶含硒蛋白主要组分F1分子量为199.8 kDa。     

Synthesis and Crystal Structure of Novel Mixed-metal Alkoxide Clusters of Ytterbium and Sodium: Yb4O4（OiPr）16Na12

The mixed-metal cluster Yb4O4(OiPr)16Na12 has been synthesized and structurally determined by IR, elemental analysis, and single-crystal X-ray diffraction. The crystal belongs to the cubic system, space group P23 with a = b = c = 13.9788(3), V = 2731.55(10)3 , Z = 1, Dc = 1.202 g/cm 3 , Mr = 1977.42, = 3.480 mm-1 , F(000) = 972, the final R = 0.0288 and wR = 0.1511 for 1677 observed reflections with Ⅰ > 2σ(Ⅰ). X-ray analysis reveals that Yb4O4 (OiPr)16Na12 is centrosym-metric and the structure contains four ytterbium metals and twelve sodium metals, and each ytterbium atom is coordinated by six oxygen atoms. In addition, an ancillary computational analysis of the optimized molecular unit was provided. The large energy gap (3.31 eV) between HOMO and LUMO indicates that the structure framework is particularly stable.     

Investigation on sound absorption properties of kapok fibers

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

Enhancing the Cellulose-Degrading Activity of Cellulolytic Bacteria CTL-6 (Clostridium thermocellum) by Co-Culture with Non-cellulolytic Bacteria W2-10 (Geobacillus sp.)

The effect of a non-cellulolytic bacterium W2-10 (Geobacillus sp.) on the cellulose-degrading activity of a cellulolytic bacterium CTL-6 (Clostridium thermocellum) was determined using cellulose materials (paper and straw) in peptone cellulose solution (PCS) medium under aerobic conditions. The results indicated that in the co-culture, addition of W2-10 resulted in a balanced medium pH, and may provide the required anaerobic environment for CTL-6. Overall, addition of W2-10 was beneficial to CTL-6 growth in the adverse environment of the PCS medium. In co-culture with W2-10, the CTL-6 cellulose degradation efficiency of filter paper and alkaline-treated wheat straw significantly increased up to 72.45 and 37.79 %, respectively. The CMCase activity and biomass of CTL-6 also increased from 0.23 U ml^?1 and 45.1 μg ml^?1 (DNA content) up to 0.47 U ml^?1 and 112.2 μg ml^?1, respectively. In addition, co-culture resulted in accumulation of acetate and propionate up to 4.26 and 2.76 mg ml^?1. This was a respective increase of 2.58 and 4.45 times, in comparison to the monoculture with CTL-6.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Effect of Ag doping concentration on the electronic and optical properties of anatase TiO2: a DFT-based theoretical study

The electronic and optical properties of pure and Ag-doped anatase TiO₂ have been calculated by spin-polarized density functional theory. Ag-doped TiO₂ with different Ag doping concentrations ranging from 2.08 to 8.33 % was investigated, and the electronic and optical properties evaluated. Substitutional Ag doped at Ti sites introduced Ag 4d states just above the valence-band maximum, which may help in shifting visible-light excited electrons to the conduction band. Our results show that increasing the doping concentration will enhance visible-light absorption up to Ag doping concentration of 6.25 %; however, further increase of the doping concentration leads to a decrease in visible-light absorption. These results indicate the possibility of tailoring the band gap and optical absorption of TiO₂ doped with Ag by varying the doping concentration. The enhanced visible-light absorption for Ag-doped TiO₂ with doping concentration of 6.25 % may be due to the existence of widely distributed Ag 4d states above the valence-band maximum and the optimal doping concentration. Ag doping shifted the absorption edge of TiO₂ towards visible light, consistent with recent experimental results. Our calculation results provide a reasonable explanation for the experimental findings.     

The (100) orientation evolution and temperature-dependent electrical properties of Bi(Zn1/2Ti1/2)O3–PbTiO3 ferroelectric films

The 0.2Bi(Zn_1/2Ti_1/2)O₃–0.8PbTiO₃ (0.2BZT–0.8PT) ferroelectric thin film was successfully fabricated on Pt(111)/Ti/SiO₂/Si substrates by a sol–gel method. The result indicates that the film exhibits the (100) preferred orientation and has a relatively dense and uniform microstructure with a thickness of ~230 nm. The formation mechanism of the oriented films was ascribed to the growth of the (100) oriented PbO layer at ~450 °C during a layer-by-layer crystallization process. Temperature-dependent electrical properties of the 0.2BZT–0.8PT films were investigated, showing that the film has a potential for high temperature applications.     

Synthesis of amine-modified mesoporous materials for CO2 capture by a one-pot template-free method

A one-pot template-free route was developed for the synthesis of novel tetraethylenepentamine modified porous silica as CO₂ adsorbents, the obtained materials were characterized by N₂ adsorption/desorption, thermogravimetry, elemental analysis, Fourier transform infrared spectrometry,scanning electron microscopy and transmission electron microscopy. It was found that the amine species were inserted into the silica skeleton, which considerably enhanced their dispersion. Compared with similar materials derived from impregnation, the porous structure of the silica can be better reserved, leading to a promising CO₂ adsorption capacity of 3.98 mmol CO₂/g-adsorbent and a fast adsorption kinetic in simulated flue gas at 348 K. The resulted adsorbents could also be easily regenerated and showed a good durability in multiple adsorption–desorption cycles. All these features make this method a promising option for the preparation of CO₂ adsorbents.