Improvement of AlGaInP light emitting diode by sulfide passivation

The brightness of AlGaInP light emitting diodes (LEDs) has been raised by a factor of 1.12 at 20 mA by sulfide passivation. Meanwhile, the sulfide also can decrease leakage current of AlGaInP LEDs at -2 V to nearly one thousandth of that in the as-fabricated device. The possible causes for the brightness increase of AlGaInP LEDs after sulfide treatment including surface roughness, reduction of Fresnel loss, and effective injection of carriers were demonstrated.     

1.8 V千兆以太网接收器模拟前端预均衡电路

介绍了一种用于1.8 V电源电压下的千兆以太网接收器的模拟前端预均衡电路。电路分为三个部分:预处理电路、基带漂移补偿电路和可变增益放大电路,主要实现回波消除、基带漂移补偿和电路增益自动控制等功能。为了与百兆模式兼容,提出了一种预处理电路。仿真结果表明,该电路可以很好地实现回波消除的功能,能够对由于基带漂移引起的信号失真给以补偿,可以提供16级不同的增益,并进行频率补偿。电路采用0.18μm标准CMOS工艺实现。     

光束发散度对紫外写入光纤光栅的影响

用傅里叶衍射光学分析了准分子激光束发散度对于光纤光栅制备的影响，发现光束发散角使光纤光栅的布拉格波长发生改变，相位版后干涉场沿光纤轴向和径向不均匀，对制备30dB高反射率光纤光栅造成困难。实验结果与理论分析基本一致，相对于理想平行光束情况，会聚光束使得光纤光栅布拉格波长出现在短波一边，发射光束使得光纤光栅布拉格波长出现在长波一边。     

Boundedness of commutators on homogeneous Herz spaces

The boundedness on homogeneous Herz spaces is established for a large class of linear commutators generated by BMO(R ⁿ ) functions and linear operators of rough kernels which include the Calderón-Zygmund operators and the Ricci-Stein oRfiUatory singular integrals with rough kernels. Project supponed in pan by the National h’atural Science Foundation of China (Grant No. 19131080) and the NEDF of China.     

离子注入中污染的产生及防护

本文概述了离子注入过程中污染产生的原因和防止污染的措施，特别强调了对微粒污染和金属污染的防护以满足ＵＬＳＩ加工对离子注入的要求。     

Improved Yen-Joye's authenticated multiple-key agreement protocol

An authenticated multiple-key agreement protocol is proposed. The protocol is not only secure against the unknown-key attack but also more efficient than other protocols.     

Fabrication of 1.55 μm VCSELs on Si using metallic bonding

Using AuGeNiCr multilayered metals as the wafer bonding medium, long-wavelength GaInAsP/InP vertical cavity surface emitting lasers employing Al-oxide/Si as the upper and lower distributed Bragg reflectors were fabricated on Si substrate with the bonding interface formed outside the vertical cavity surface emitting laser cavity. Laser emission at 1.545 μm was measured under pulsed operations near room temperature. The low-temperature metallic bonding process demonstrates a great potential in device fabrication     

Coplanar waveguide-fed uniplanar bow-tie antenna

The design of coplanar waveguide (CPW)-fed bow-tie antenna for the 2.4-GHz ISM band is described. A coplanar waveguide-to-coplanar strips (CPW-to-CPS) balun is used to obtain the balanced feed line for the printed bow-tie. An analysis method based on the mixed potential integral equation method is used to characterize the input characteristics of the bow-tie antenna. The numerical results obtained are in good agreement with the experimental data. Through experiments with bow-tie antennas of various extended angles, the bow-tie antenna with a 90° extended angle exhibits the widest bandwidth in the desired frequency band which has a bandwidth of 17% for a VSWR <1.5:1     

Color image retrieval based on hidden Markov models

In this correspondence, a new approach to retrieving images from a color image database is proposed. Each image in the database is represented by a two-dimensional pseudo-hidden Markov model (2-D PHMM), which characterizes the chromatic and spatial information about the image. In addition, a flexible pictorial querying method is used, by which users can paint the rough content of the desired images in a query picture. Image matching is achieved by comparing the query picture with each 2-D PHMM in the database. Experimental results show that the proposed approach is indeed effective.