Structure‐Properties Relationship in Iron Oxide‐Reduced Graphene Oxide Nanostructures for Li‐Ion Batteries

Non‐aqueous sol‐gel routes involving the reaction of metal oxide precursors in organic solvents (e.g., benzyl alcohol) at moderate temperature and pressure, offer advantages such as high purity, high reproducibility and the ability to control the crystal growth without the need of using additional ligands. In this paper, a study carried out on a series of iron oxide/reduced graphene oxide composites is presented to elucidate a structure‐properties relationship leading to an improved electrochemical performance of such composites. Moreover, it is demonstrated that the easy production of the composites in a variety of temperature and composition ranges, allows a fine control over the final particles size, density and distribution. The materials obtained are remarkable in terms of the particle's size homogeneity and dispersion onto the reduced graphene oxide surface. Moreover, the synthesis method used to obtain the graphene oxide clearly affects the performances of the final composites through the control of the restacking of the reduced graphene oxide sheets. It is shown that a homogeneous and less defective reduced graphene oxide enables good electrochemical performances even at high current densities (over 500 mAh/g delivered at current densities as high as 1600 mA/g). The electrochemical properties of improved samples reach the best compromise between specific capacity, rate capability and cycle stability reported so far.     

A theoretical study of light emission from nanoscale silicon

In comparing our calculated exciton energies with those obtained from pseudopotential calculations (Ref. 27) and from a previous tight binding calculation (Ref. 30), we stated that the differences between the three semi-empirical calculations arise because of different treatment of the nanocrystal surfaces. This appears not to be correct. Subsequent calculations with variable Si-H parameters have shown that the band gap is actually rather insensitive to the actual value of these. Instead, the important feature appears to be the overall quality of the bulk band structure parameterization. References 27 and 30 use more extensive and higher quality empirical parameterizations for bulk Si than the sp³s∗ model used by us. Repeating our time dependent calculations with an improved sp³d⁵ parameterization results in similar values to those of Refs. 27 and 30 for the exciton energies.¹ The agreement of the sp³s∗ values with experimental photoluminescence energies (Fig. 7) cannot, therefore, be regarded as well understood at this time.^1,2     

Synchrotron X‐ray CT characterization of titanium parts fabricated by additive manufacturing. Part I. Morphology

Synchrotron X‐ray tomography has been applied to the study of titanium parts fabricated by additive manufacturing (AM). The AM method employed here was the Arcam EBM^® (electron beam melting) process which uses powdered titanium alloy, Ti64 (Ti alloy with approximately 6%Al and 4%V), as the feed and an electron beam for the sintering/welding. The experiment was conducted on the Imaging and Medical Beamline of the Australian Synchrotron. Samples were chosen to examine the effect of build direction and complexity of design on the surface morphology and final dimensions of the piece.     

Three-dimensional image fusion by use of multiwavelength digital holography

We present three-dimensional (3D) image fusion by use of digital holography. We demonstrate experimentally that, through the image fusion technique with multiresolution wavelet decomposition, it is possible to increase the details and contrast of 3D reconstructed images obtained by multiwavelength digital holography. Although there is substantial activity in the fields of image fusion and holography, to the best of our knowledge, this is the first report of 3D image fusion by use of digital holography.     

The use of vibrational spectroscopy to study the pathogenesis multiple sclerosis and other neurological conditions

Spectroscopy techniques are valuable tools in biomedical research and have been used extensively in the study of disease. However, neurological conditions such as multiple sclerosis (MS) have received little attention and the available spectroscopy studies are limited, both in overall numbers of patients studied and the disease samples considered. MS is a complex immune-mediated disease, with variable clinical courses and limited therapeutic options. This review aims to summarize current literature in the area, demonstrating how spectroscopy techniques can provide valuable information to inform and advance research into the most common neurological condition affecting young adults.     

Improved synthesis of polyfluorinated l-lysine for 19F NMR-based screening

Polyfluorinated N-α-Fmoc--Boc-l-lysine represents the best-in-class among a set of polyfluorinated amino acids (PFAs) which are useful tools for ¹⁹F NMR-Based Screening. In this communication, optimized reaction conditions that allowed for the multi-gram preparation of this unnatural amino acid are reported.     

High-field MRS studies in brain slices

We are applying multi-nuclear high-field (500 MHz) MR spectroscopy of metabolising whole tissue preparations of the mammalian brain to studies on individual components of convulsions, which include prolonged depolarization, metabolic deprivation, and the effects of excitotoxins. The responses of glial cells and neurones can be partially distinguished by following labelling patterns of metabolic intermediates from ¹³C-labelled glucose or acetate (which enters only glial cells). This approach clearly confirmed our earlier indications that the metabolic response to depolarization (40 mM extracellular K⁺) occurs essentially in glial cells. Some evidence for metabolic shuttling between glia and neurones was obtained from the changes in C3/C4 ratios of glutamate and glutamine, and the C2/C3 of GABA. Mechanisms for metabolic support of neurones by glia may be of importance in neuronal protection under such metabolic stress as occurs in epilepsy. Changes in free intracellular divalent cations ([Ca²⁺]_i and [Zn²⁺]_i) were monitored using the ¹⁹F-MRS indicator, 5FBAPTA. Large increases in [Ca²⁺]_i and decreases in PCr were produced by excitotoxins (glutamate and NMDA), depolarization or ischaemia, but intracellular Zn²⁺ appeared only after exposure to the excitotoxins. The NMDA receptor blocker, MK801, removed all of the responses to NMDA, but only prevented the appearance of Zn²⁺ observed with glutamate. These results indicate that the damage caused to neurones by such insults as convulsions is not due simply to the presence of excessive excitotoxic glutamate.     

Crystalline misfit-angle implications for solid sliding

For the contact of two finite portions of interacting rigid crystalline surfaces, we compute the pinning energy barrier dependency on the misfit angle and contact area. This simple model allows us to investigate a broad contact-size and angular range, thus obtaining the statistical properties of the energy barriers opposing sliding for a single asperity. These data are used to generate the distribution of static frictional thresholds for the contact of polycrystals, as in dry or even lubricated friction. This distribution is used as the input of a master equation to predict the sliding properties of macroscopic contacts.     

Measurement of ultraweak transitions in the visible region of molecular oxygen

A highly sensitive cavity-enhanced frequency modulation spectroscopy technique has been used to measure ultraweak transitions in molecular oxygen that had not previously been characterized. The self-broadened half-width and line intensity of the measured transitions are reported. We include 12 high J transitions in the band of ¹⁶O₂ (the so-called A band), 59 transitions in the hot band of ¹⁶O₂, and 17 high J transitions in the band of ¹⁶O¹⁸O. Our measurements of line positions of the ¹⁶O¹⁸O transitions are used to determine improved molecular constants for the excited state of ¹⁶O¹⁸O.     

Fractal characteristics of far-field diffraction patterns for two-dimensional Thue-Morse quasicrystals

We report a numerical method to analyze the fractal characteristics of far-field diffraction patterns for two-dimensional Thue-Morse (2-D TM) structures. The far-field diffraction patterns of the 2-D TM structures can be obtained by the numerical method, and they have a good agreement with the experimental ones. The analysis shows that the fractal characteristics of far-field diffraction patterns for the 2-D TM structures are determined by the inflation rule, which have potential applications in the design of optical diffraction devices.