Performance enhancement of the DSRC system using frequency-domain equalization for 5.9 GHz DSRC applications

This paper proposes the use of equalization concepts in frequency domain that exploit the frequency domain channel matrix to combat inter-carrier interference (ICI) instead of inter-symbol interference (ISI) in 5.9 GHz Dedicated Short Range Communications (DSRC) systems. The physical layer (PHY) of DSRC is currently being developed by work group of IEEE 802.11p. The conventional system currently assumes static channel characteristics. Channel tracking schemes were investigated and the Viterbi-aided channel estimation scheme was proposed for DSRC systems that did not explicitly exploit the ICI components caused by the time-varying channels. The performance of the DSRC system is investigated for a time-varying channel using a conventional DSRC model, a decision-directed (Viterbi-aided) channel estimation model, and the frequency-domain equalization design. It is shown that the DSRC system with the frequency-domain equalization achieves a considerable performance enhancement compared to both the conventional and the Viterbi-aided channel estimation schemes in terms of both packet error rate (PER) and bit error rate (BER) at relatively high and low velocities.     

Design of 3.1–10.6 GHz ultra-wideband CMOS low noise amplifier with current reuse technique

A new low complexity ultra-wideband 3.1–10.6 GHz low noise amplifier (LNA), designed in a chartered 0.18 μm RFCMOS technology, is presented in this paper. The ultra-wideband LNA only consists of two simple amplifiers with an inter-stage inductor connected. The first stage utilizing a resistive current reuse and dual inductive degeneration techniques is used to attain a wideband input matching and low noise figure. A common source amplifier with inductive peaking technique as the second stage achieves high flat gain and wide the −3 dB bandwidth of the overall amplifier simultaneously. The implemented ultra-wideband LNA presents a maximum power gain of 15.6 dB, a high reverse isolation of −45 dB and a good input/output return losses are better than −10 dB in the frequency range of 3.1–10.6 GHz. An excellent noise figure (NF) of 2.8–4.7 dB was obtained in the required band with a power dissipation of 14.1 mW under a supply voltage of 1.5 V. An input-referred third-order intercept point (IIP3) is −7.1 dBm at 6 GHz. The chip area including testing pads is only 0.8 mm × 0.9 mm.     

Environmental-adaptive indoor radio path loss model for wireless sensor networks localization

In the received signal strength indicator (RSSI) based indoor wireless sensor networks localization system, RSSI measurements are very susceptible to multipath fading, anisotropy of antenna, low supply voltage of node and so on, which will cause the system failure to achieve a high location accuracy. This paper presents an environmental-adaptive path loss model. In the process of localization, the calibrated coefficient LSV of low supply voltage, which can be determined by monitoring the supply voltage of the sender, is used to calibrate ranging errors caused by its low supply voltage. The blind node utilizes the absolute value of RSSI to generate the phase of the corresponding receiver's location so as to determine the correction coefficient of indoor multipath fading R_i. Furthermore, in order to improve the accuracy of RSSI measurements, we also take full consideration of the effect of antenna to accurately determine the corresponding path loss model of the two communication nodes. The proposed path loss model is suitable for the majority of wireless location systems that are on the basis of RSSI-based ranging techniques. Experiment results show that the estimation accuracy and adaptability of the proposed path loss model are significantly higher than that of the traditional one.     

Gas sensing of colloidal polyaniline in a chemoresistor consisting of nanometer electrodes

The high conductivity of colloid-conducting polymers is explained by the networking structures and the hopping mechanisms of the metallic particles [1], [2] and [4]. To observe how the metallic region and the networking structures differ in sensing NH₃ gas, E-beam lithography and electromigration were used to make chemoresistors with nanometer-gap electrodes. Colloid Pani was coated on a nanometer gap as a reaction matrix for the gas. The I-V curves were measured in a vacuum and the NH₃ gas was nonlinear. In sensors with a gap of less than 10 nm, there was a two- or threefold increase in the conductivity, and the work function decreased from 600 meV in a vacuum to 250 meV in NH₃ gas. In contrast, the conductivity of sensors with gaps of 200 and 500 nm decreased to 1/1000 in the NH₃ gas environment. The decrease of the conductivity can be explained by electron-hole annihilation, which appears to occur on the surface of the secondary particles. With comb-type electrodes, the operating voltage can be decreased by three orders of magnitude. In electrodes with 200 and 500 nm gaps, the I-V has a step-type response to NH₃ gas.     

Quantitative analysis of the dynamic behaviour of photochromic systems

The good understanding of a photochromic reaction mechanism requires the establishment of the list of all the transient species and the definition of their connecting processes. The purpose of kinetic studies is the determination of the main photochromic parameters, such as the quantum yields of photoisomerization, rate constants of thermal relaxation and spectra of transient species. These data allow the establishment of structure properties relationships in order to select the best substituents to improve photochromic performances within a given series. In this review, we describe the dynamic behaviour of various photochromic systems during thermal relaxation after irradiation, from the simplest mono-exponential decay to the more complicated multi-exponential dynamics. Then, we analyse the evolution of the long-lived isomers under continuous irradiation. Several pedagogical examples and tricks to perform easy kinetic analysis are given in the appendices.     

Functionality of nano titanium dioxide on textiles with future aspects: Focus on wool

The consumption of titanium dioxide in today's world is on the increase. As the most popular nano substance, TiO₂ is used in various industries notably in the textile industry. More and more recently, through a synergistic combination of photocatalytic features of nanoparticles, fabrics with novel properties are produced. Self-cleaning and stability against UV rays as well as chemical media, to name but a few, are among new prominent properties, obtained on textiles. A common subject reported in most studies has been the diverse approaches to immobilize the nanoparticles on the surface of fabrics. Wool is among common textile materials that have undergone numerous processes to be modified. This review intends to bring to light different aspects of application of nano titanium dioxide in the textile industry especially on wool, and also presents a concise overview on the rigorous pieces of research conducted in this realm.     

Electrochemical sensors and biosensors based on redox polymer/carbon nanotube modified electrodes: A review

The aim of this review is to present the contributions to the development of electrochemical sensors and biosensors based on polyphenazine or polytriphenylmethane redox polymers together with carbon nanotubes (CNT) during recent years. Phenazine polymers have been widely used in analytical applications due to their inherent charge transport properties and electrocatalytic effects. At the same time, since the first report on a CNT-based sensor, their application in the electroanalytical chemistry field has demonstrated that the unique structure and properties of CNT are ideal for the design of electrochemical (bio)sensors. We describe here that the specific combination of phenazine/triphenylmethane polymers with CNT leads to an improved performance of the resulting sensing devices, because of their complementary electrical, electrochemical and mechanical properties, and also due to synergistic effects. The preparation of polymer/CNT modified electrodes will be presented together with their electrochemical and surface characterization, with emphasis on the contribution of each component on the overall properties of the modified electrodes. Their importance in analytical chemistry is demonstrated by the numerous applications based on polymer/CNT-driven electrocatalytic effects, and their analytical performance as (bio) sensors is discussed.     

Dual beam method for laser welding of galvanized steel: Experimentation and prospects

Laser welding of zinc-coated steel sheets in lap configuration poses a challenging problem, because of the zinc vapours spoiling the quality of the weld. In continuation to the earlier work, the novel solution of dual laser beam method for lap welding of galvanized steel sheets is discussed here in view of the recently obtained observations and ensuing concerns. In this method the precursor beam cuts a slot, thus making an exit path for the zinc vapours, while the second beam performs the needed welding. The metallurgical analysis of the welds is encouraging showing absence of zinc in the welded area. In the current work on this technique, new experimental results have been obtained verifying the earlier observations. Along with this, the possibility of using a transversely split-up beam for the welding purposes with this approach is discussed and analyzed in this paper. This new technique is expected to be very useful in prospective industrial applications requiring higher welding throughput along with the needed quality.