Charge transfer and bipolar charging of particles in a bubbling fluidized bed

Particle-particle and particle-wall collisions in gas-solid fluidized beds lead to charge accumulation on particles.This work evaluated the effect of fluidization time on charge transfer and bipolar charging(charge separation)and their influence on hydrodynamic structures in a fluidized bed.Experiments were performed with glass beads and polyethylene particles in a glass column.The pressure fluctuations and net electrostatic charge of particles were measured during fluidization.Wavelet and short-time Fourier transforms were used to analyze pressure fluctuations.The results revealed that bipolar charging is the dominant tribocharging mechanism in a bed of glass beads.Bipolar charging in a bed of particles with a narrow size distribution does not affect either hydrodynamic structures or the transition velocity to the turbulent regime.A large difference between the work functions of the wall and particle in the bed of polyethylene particles leads to high charge transfer.Formation of a stagnant particle layer on the wall eventually causes the energy of macro-structures to increase to its maximum.At longer fluidization times,the macro-structural energy decreases and bubbles shrink until the electrostatic charge reaches the equilibrium level.These results well describe the effect of fluidization time on hydrodynamic structures.     

Magnetic-Field-Controlled Quantum Critical Points in the Triangular Antiferromagnetic Cs2CuCl4-xBrx Mixed System

The triangular antiferromagnetic Cs₂CuCl_4-xBr_x mixed system is studied by neutron single-crystal diffraction in magnetic field. It shows a rich magnetic phase diagram consisting of four regimes depending on the Br concentration and is characterized by different exchange coupling mechanisms. For the investigated compositions from regime I (0 < x ≤ 1.5), a critical magnetic field B_c is found for a Br concentration x = 0.8 at B_c = 8.10(1) T and for x = 1.1 at B_c = 7.73(1) T and from regime IV (3.2 < x < 4) for x = 3.3 at B_c = 0.99(3) T. For magnetic fields larger than the respective B_c, magnetic superlattice reflections of these compounds are not found. The incommensurate magnetic wave vector q = (0, 0.470, 0) appears below the ordering temperature T_N = 0.51(1) K for Cs₂CuCl_3.2Br_0.8, and q = (0, 0.418, 0) below T_N = 1.00(6) K for Cs₂CuCl_0.3Br_3.7. Neutron diffraction experiments at around 60 mK for x = 3.7 in a magnetic field show the critical magnetic field at B_c = 7.94(16) T and the formation of the second magnetic phase at around 8.5 T depending on the temperature. Inelastic neutron scattering experiments for the compound from regime III (2 < x ≤ 3.2) with x = 2.2 show dynamical correlations at a temperature around 50 mK giving evidence for a spin liquid phase.     

One-pot synthesis of N-alkyl purine and pyrimidine derivatives from alcohols using TsIm: a rapid entry into carboacyclic nucleoside synthesis

A convenient and efficient one-pot N-alkylation of nucleobases from alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, treatment of alcohols with a mixture of purine or pyrimidine nucleobase, TsIm, K₂CO₃, and triethylamine in refluxing DMF regioselectively furnishes the corresponding N-alkyl nucleobases in good yields. This methodology is highly efficient for various structurally diverse primary alcohols.     

Back propagation modeling of shear stress and viscosity of aqueous Ionic-MXene nanofluids

Journal of Thermal Analysis and Calorimetry - Back-propagation modeling of viscosity and shear stress of Ionic-MXene nanofluid is carried out in this work. The data for Ionic-MXene nanofluid of...     

An enantioselective chiral Brønsted acid catalyzed imino-azaenamine reaction

The enantioselective Br?nsted acid catalyzed addition of methyleneaminopyrrolidine to N-Boc imines has been achieved in the presence of chiral phosphoric acids derived from 3,3'-di(phenanthryl)-H8-BINOL. The corresponding aminohydrazones have been isolated in good yields with enantiomeric excesses up to 90%. [reaction: see text]     

Makespan minimization for parallel machines scheduling with multiple availability constraints

The problem of makespan minimization for parallel machines scheduling with multiple planned nonavailability periods in the case of resumable jobs is considered. In the current state of the literature, there is a limited number of models and algorithms dealing with this problem and only for very small problem size, and nonavailability limited to some machines. The problem is first formulated as a mixed integer linear programming model and optimally solved using CPLEX for small to moderately large size problems with multiple availability constraints on all machines. An implicit enumeration algorithm using the lexicographic order is then designed to solve large-scale problems. Numerical results are obtained for several experiments and they show the validity and performance improvements procured by both the MILP model and the new enumeration algorithm.     

\hbox {Ph}_{3}\hbox {P/CCl}_{4} as a highly efficient reagent for one-pot N-alkylation of sulfonamides from alcohols: a rapid route to N-alkyl sulfonamides synthesis

A mild, efficient, and selective protocol for the one-pot $N$ -alkylation of sulfonamides with alcohols using triphenylphosphine and carbon tetrachloride is described. In this method, treatment of alcohols with a mixture of triphenylphosphine, carbon tetrachloride, and potassium sulfonylamide salts in refluxing anhydrous DMF furnishes the corresponding $N$ -alkyl sulfonamides in good to excellent yields. This protocol is highly efficient for various structurally diverse alcohols and potassium sulfonylamide salts. In this paper the influence of solvents and various reagents as sources for electrophilic-halogen instead of carbon tetrachloride in combination with triphenylphosphine have been examined. This protocol demonstrates the selectivity between primary and secondary alcohols. A plausible mechanism for this protocol has been described.     

A novel primary amine-based anion exchange membrane adsorber

A novel anion exchange membrane adsorber is presented which shows excellent impurity removal under different buffer conductivities ranging from 2 to 2 7mS/cm. The membrane utilizes a primary amine ligand (polyallylamine) and was designed specifically to bind impurities at high salt concentrations. Studies with DNA, endotoxin, and virus spiked into buffer at varying salt conditions were done, resulting in clearance of >3, 4, and 4 LRV, respectively, with negligible change on increasing salt up to 27 mS/cm conductivities. Verification of virus removal in mAb feedstocks is also shown. The data are compared with other membrane adsorbers and a conventional resin which utilize traditional chemistries to demonstrate improved purification performance with the primary amine ligand. Additional data on scale-up of the membrane adsorber device is discussed. A stacked flat-sheet design was implemented to ensure linear scale-up of performance using bovine serum albumin (BSA) as a model. The linearly scalable device, coupled with the highly effective membrane for virus, DNA, and endotoxin removal, represents a step forward in polishing technology for the purification of monoclonal antibodies and recombinant proteins.     

Investigation of a Biosensor Based on Phenylalanine Dehydrogenase Immobilized on a Polymer‐Blend Film for Phenylketonuria Diagnosis

We investigated a L ‐phenylalanine (L ‐phe) biosensor, functionalized through enzyme immobilization on a polymer‐blend film. The electron mediator 3,4‐dihydroxybenzaldehyde (3,4‐DHB) was employed at the electrode surface to improve direct oxidation of NADH to NAD⁺ and no additional reagents is required to be added to the sample solution. The bioactivated electrode was coated with a semi‐permeable cellulose acetate membrane in order to prevent dissolution of biofunctionalized polymer‐blend film. This constructed enzyme electrode is the first selective biosensor for phenylketonuria (PKU) detection. The sensitivity of the enzyme electrode was determined as 12.014 mA/M cm². The Michaelis–Menten and current responses as well as sensitivity of the electrode showed improved values than those of previous works. This selective biosensor presented an excellent electroanalytical response for L ‐phe, with a high steady‐state current being obtained after 20 s. The sensitivity of our biodevice is quite sufficient for the purpose of PKU detection because the reference range of clinical concern for L ‐phenylalanine concentration is C_{L ‐phe}>0.5 mM. This surface‐bioactivated enzyme electrode retained more than 80 % of its electrocatalytic activity after 16 days.     

Should the AOAC use-dilution method be continued for regulatory purposes?

Despite its very poor reproducibility, AOAC INTERNATIONAL's use-dilution method (UDM) for bactericidal activity (AOAC Methods 964.02, 955.14, and 955.15) has been required by the U.S. Environmental Protection Agency (EPA) since 1953 for regulatory purposes, while methods with better reproducibility have been adopted in Canada and Australia. This study reviews UDM from a statistical perspective. Additionally, the test's expected results were compared to those obtained from actual evaluation of several formulations. Significant gaps have been identified in the reproducibility of the test data as predicted by statistical analysis and those presented to the EPA for product registration. UDM's poor reproducibility, along with its qualitative nature, requires the concentration of the active ingredient to be high enough to ensure all or most carriers to be free of any viable organisms. This is not in accord with the current trends towards sustainability, human safety, and environmental protection. It is recommended that the use of the method for regulatory purposes be phased out as soon as possible, and methods with better design and reproducibility be adopted instead.