In the present article, the thermal distribution inside the gain medium of a passively Q-switched microchip laser is modeled and simulated for actual practical values associated with an available microchip laser constructed in our laboratory. The effects of the non-uniform heat distribution on the spectral properties of the output laser beam have been investigated and simulated with the variation of diode-pump power and pulse repetition rate. It is observed that the gain bandwidth as well as Optical Path Difference (OPD) values of the propagating pulses are significantly decreased, while the Nd:YAG chip is cooled down to a certain value. The validity of the utilized model is checked by setting and characterizing the spectral properties of a fabricated laboratory microchip laser under different heating conditions. It is verified that when the temperature of the gain material is changed by an electronically controlled Peltier device, the spectrum of the output laser beam can be switched between single- and dual-mode situations. This physical character has shown good agreement between the presented model and obtained experimental results. 相似文献
Gold nanomaterials (AuNMs) have distinctive electronic and optical properties, making them ideal candidates for biological, medical, and defense applications. Therefore, it is imperative to evaluate the potential biological impact of AuNMs before employing them in any application. This study investigates two AuNMs with different aspect ratios (AR) on mediation of biological responses in the human keratinocyte cell line (HaCaT) to model potential skin exposure to these AuNMs. The cellular responses were evaluated by cell viability, reactive oxygen species (ROS) generation, alteration in gene and protein expression, and inflammatory response. Gold nanospheres, nominally 20 nm in diameter and coated with mercaptopropane sulfonate (AuNS-MPS), formed agglomerates when dispersed in cell culture media, had a large fractal dimension (D(f) = 2.57 ± 0.4) (i.e., tightly bound and densely packed) and were found to be nontoxic even at the highest dose of 100 μg/mL. Highly uniform, 16.7 nm diameter, and 43.8 nm long polyethylene glycol-capped gold nanorods (AuNR-PEG) also formed agglomerates when dispersed into the cell culture media. However, the agglomerates had a smaller fractal dimension (D(f) = 1.28 ± 0.08) (i.e., loosely bound) and were found to be cytotoxic to the HaCaT cells, with a significant decrease in cell viability occurring at 25 μg/mL and higher. Moreover, AuNR-PEG caused significant ROS production and up-regulated several genes involved in cellular stress and toxicity. These results, combined with increased levels of inflammatory and apoptotic proteins, demonstrated that the AuNR-PEG induced apoptosis. Exposure to AuNS-MPS, however, did not show any of the detrimental effects observed from the AuNR-PEG. Therefore, we conclude that shape appears to play a key role in mediating the cellular response to AuNMs. 相似文献
The application of cerium(IV) oxide (CeO2) as a neutral and heterogeneous catalyst for aldehyde-induced decarboxylative coupling of l-proline with triethyl phosphite and nitromethane is described. In addition, a [3+2] cycloaddition reaction of the in situ generated 1,3-dipolar intermediate with benzaldehyde in the absence of a nucleophile is also reported. 相似文献
The ‘click synthesis’ of some novel O‐substituted oximes, 7a – 7t , which contain 1,2,3‐triazolediyl residues, as new analogs of β‐adrenoceptor antagonists is described (Schemes 1–4). The synthesis of these compounds was achieved in four to five steps. The formation of oximes of 9H‐fluoren‐9‐one and benzophenone, i.e., 9a and 9b , respectively, followed by their reaction with propargyl bromide, afforded O‐propargyl oximes 10a and 10b , respectively, which by a subsequent CuI‐catalyzed Huisgen cycloaddition with prepared β‐azido alcohols 11a – 11j (Schemes 2 and 3), led to the target compounds 7a – 7t in good yields. 相似文献
The application of the mapping method in finite element modeling is extended to quantitatively compare mixing in different twin‐screw extruder layouts. The mapping method provides volumetric quantities, which are crucial for the analysis and optimization of mixing based on the tracking of particles in the velocity field. A new approach to the mapping method is developed to analyze mixing in complex, dynamic open geometries. Several screw configurations and different types of conveying screws are compared, changing the pitch and gap widths. The volume‐weighted intensity of segregation is used as a mixing measure.
A numerical simulation was conducted to study the effect of pressure on bubble dynamics in a gas–solid fluidized bed. The gas flow was modeled using the continuum theory and the solid phase, by the discrete element method (DEM). To validate the simulation results, calculated local pressure fluctuations were compared with corresponding experimental data of 1-mm polyethylene particles. It was shown that the model successfully predicts the hydrodynamic features of the fluidized bed as observed in the experiments. Influence of pressure on bubble rise characteristics such as bubble rise path, bubble stability, average bubbles diameter and bubble velocity through the bed was investigated. The simulation results are in conformity with current hydrodynamic theories and concepts for fluidized beds at high pressures. The results show further that elevated pressure reduces bubble growth, velocity and stability and enhances bubble gyration through the bed, leading to change in bed flow structure. 相似文献
This paper presents a technique for designing a broad-band partially adaptive antenna using a new recursive fan filter. Each beamformer is designed using recursive two-pole sections. This method reduces the number of taps of the fan filter considerably. Interferences occurring in the sidelobes as well as the mainlobe of the desired pattern and having the same frequency as the desired signal and overlap in bandwidths are cancelled effectively independent of frequency 相似文献
Excessive and unwarranted administration of antibiotics has invigorated the evolution of multidrug-resistant microbes. There is, therefore, an urgent need for advanced active compounds. Ionic liquids with short-lived ion-pair structures are highly tunable and have diverse applications. Apart from their unique physicochemical features, the newly discovered biological activities of ionic liquids have fascinated biochemists, microbiologists, and medical scientists. In particular, their antimicrobial properties have opened new vistas in overcoming the current challenges associated with combating antibiotic-resistant pathogens. Discussions regarding ionic liquid derivatives in monomeric and polymeric forms with antimicrobial activities are presented here. The antimicrobial mechanism of ionic liquids and parameters that affect their antimicrobial activities, such as chain length, cation/anion type, cation density, and polymerization, are considered. The potential applications of ionic liquids in the biomedical arena, including regenerative medicine, biosensing, and drug/biomolecule delivery, are presented to stimulate the scientific community to further improve the antimicrobial efficacy of ionic liquids. 相似文献
The viologen‐type dialdehyde of [N,N′‐bis(methylsalicylaldehyde)‐4,4′‐bipyridinium] dichloride (DA) was synthesized by reacting 5‐chloromethylsalicylaldehyde and 4,4′‐bipyridine. Then a new polymeric Schiff base ligand (PSBL) was synthesized by the condensation reaction of ethylenediamine and DA in methanol under reflux conditions. Afterwards, new ionic metallo‐Schiff base polymers (IMSPs) were synthesized by reacting PSBL with VO(acac)2, ZnCl2 and CuCl2 via coordination chelation. DA, PSBL and IMSPs were characterized using various analytical methods and spectral techniques. The solid‐state electrical conductivities of PSBL and IMSPs were studied. The electrical conductivity of these polymers at 300 K ranged from 1.30 × 10?5 to 4.52 × 10?10 Ω?1 m?1, which means they are potential organic and metallo‐organic semiconductors. 相似文献