Silicon-Containing Condensation Polymers Derived from Long-Chain Fatty Acids

Silicon-containing condensation polymers were prepared starting from difunctional silicon-containing carboxylic acids or diols derived from long-chain fatty acids. Polyesters were synthesized by reaction of diacids containing siloxane linkages with diols, and diols containing siloxane linkages with various diacids. 1,3-Bis (10-carboxydecyl)tetramethyldisiloxane was condensed with various diamines to yield polyamides. 1,3-Bis(11-hydroxyundecyl)tetramethyldisiloxane and 1,3-bis [9(10)-hydroxyoctadecyl]tetramethyldisiloxane were condensed with diisocyanates to yield polyurethanes. Polycarbonates were synthesized by reacting the diols containing siloxane linkages with ethyl chloroformate. Some polybenzimidazols were synthesized by heating the diesters of the silicon-containing carboxylic acids with 3,3′ -diaminobenzidine. Some of the polyurethanes and polybenzimidazoles were thermally stable up to 300°C as indicated by TGA.     

A computational investigation of the electronic properties of Octahedral Al n N n and Al n P n cages (n = 12, 16, 28, 36, and 48)

Density functionla theory (DFT) calculations are performed to characterize geometric and electronic features of the octahedral Al _n N _n and Al _n P _n cages (n = 12, 16, 28, 32, and 48). Toward this aim, ¹⁵N, ²⁷Al, and ³¹P chemical shielding (CS) tensors as well as natural charge analyses are calculated for the optimized structures. CS parameters detect three distinct electronic environments for atoms within the Al _n N _n and Al _n P _n cages. The chemical shifts of N2 sites belonging to a hexagon and surrounded by three hexagons and a square obtained are different from those of N3 sites belonging to a hexagon that is surrounded only by hexagons—due to different curvatures exerted at the sites with different local structures. In addition, there is an increasing tendency in the Δσ values of the three local structures, Δσ (N1) > Δσ (N2) > Δσ (N3), N1 sites belonging to four-membered rings. The chemical shieldings of those Al and P sites belonging to a hexagon that is surrounded only by hexagons in the cages (360.7–366.7 and 496.5–514.7 ppm) are close to those previously reported for AlP nanotubes. Three distinct electrostatic environments around the N, Al, and P nuclei are also confirmed by the calculated natural charges. It should be noted that the positively charged Al atoms on the cages turn out to be the available sites for adsorption of H2 molecules.     

Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.     

In vitro surface biocompatibility of high-content silicon-substituted calcium phosphate ceramics

The present work investigates surface biocompatibility of silicon-substituted calcium phosphate ceramics. Different silicon-substituted calcium phosphate ceramic bodies were prepared from co-precipitated powders by sintering at 1300°C. The in vitro bioactivity of the ceramics was assessed in simulated body fluid (SBF) at 37°C for periods up to 4 weeks. The changes in the surface morphology and composition were determined by scanning electron microscopy (SEM) coupled with electron probe microanalysis and energy dispersive spectrometer (EDX). Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to observe the change in ionic concentration of SBF after removal of the samples. The bioactivity of the ceramics increased with an increasing silicate ion substitution in a systematic way. The surface of ceramics with 2.23% silicon substitution was partially covered with apatite layer after one week, while ceramics with 8.1% silicon substitution were completely covered with apatite in the first week. The porous microstructure of high-concentration Si-substituted ceramics helps the dissolution of surface ions and the leaching process. This allows SBF to reach supersaturation in a short time and accelerate the deposition of apatite layer.      

conversion of trimethylsilyl ethers to acetyl or formyl esters with TiCl4

A simple method is described for the efficient conversion of trimethylsilyl ethers to their corresponding acetyl and formyl esters in refluxing ethyl acetate or ethyl formate in the presence of TiCl₄.     

A convenient and mild synthesis of new 2-aryl-3-hydroxy-6,7-dihydro-1H-indol-4(5H)-ones via a one-pot,three-component reaction in water

A simple and convenient synthesis of 2-aryl-3-hydroxy-6,7-dihydro-1H-indol-4(5H)-ones is achieved in high yields via the one-pot, three-component reaction of arylglyoxals, 1,3-cyclohexanedione, and ammonium acetate in water under reflux conditions.     

Demulsification Efficiency of Some New Demulsifiers Based on 1,3,5-Triethanolhexahydro-1,3,5-triazine

This study mainly concentrates on the synthesis of three novel demulsifiers and the investigation of their demulsification efficiency. The demulsifiers were derived from 1,3,5-triethanolhexahydro-1,3,5-triazine, which was prepared by the reaction of monoethanol amine with formaldehyde. The 1,3,5-triethanolhexahydro-1,3,5-triazine was ethoxylated by introducing 20 units of ethylene oxide and then esterified at different molar ratios with oleic acid (1, 2, and 3) to give three demulsifiers, namely, E₂₀TO, E₂₀TO₂, and E₂₀TO₃. The chemical structures of the prepared demulsifiers were confirmed by ¹H NMR and FTIR spectrum. The demulsification efficiency of these demulsifiers was tested on the natural water-in-oil (w/o) emulsions (50% water content). From the obtained results, it has been found that the investigated demulsifiers have a great potential to break the w/o emulsions. The trioleat ester (E₂₀TO₃) exhibited the maximum demulsification efficiency (96%) after 120 minutes at 55°C.     

Narrow‐band interference suppression in wavelet packets based multicarrier multicode CDMA overlay system

The wavelet packets based multicarrier (MC) multicode (MCD) code‐division multiple‐access (CDMA) transceiver consists of the MCD part, which ensures the transmission for high speed and flexible data rate; the MC part contributing to robustness to frequency‐selective fading and flexibility for handling multiple data rates; and wavelet packets (WPs) modulation technique, which contributes to the mitigation of the interference problems. As WPs have lower sidelobes compared with sinusoidal carriers, this system is very effective in reducing the problem of inter‐carrier interference. Of course, like any CDMA system, the system can suppress a given amount of interference. This paper considers an interference suppression scheme which will enhance the performance of the system. The receiver employs suppression filters to mitigate the effect of narrow‐band jammer interference. The framework for the system and the performance evaluation are presented in terms of the bit error rate and the outage probability over a Nakagami fading channel. Also, we investigate how the performance is influenced by various parameters, such as the number of taps of the suppression filter and the ratio of narrow‐band interference bandwidth to the spread‐spectrum bandwidth. Finally, the performance of the system is compared with the performance of sinusoidal based MC/MCD‐CDMA system denoted Sin‐MC/MCD‐CDMA. Copyright © 2012 John Wiley & Sons, Ltd.     

Gamma-ray and sunlight-induced synthesis of silver nanoparticles using bacterial cellulose and cell-free filtrate produced by Komagataeibacter rhaeticus N1 MW322708 strain

Cellulose - Antibacterial coatings based on bacterial cellulose (BC) have been widely used in many fields including food packaging and wound dressing. In this study, we aimed to synthesis of...     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...