An implicit 2D hydrodynamic numerical model for free surface–subsurface coupled flow problems

A 2‐dimensional hydrodynamic finite volume model has been proposed for simultaneous simulation of free surface and saturated porous media. The governing equations of the former are 2‐dimensional averaged in a unit width of Navier‐Stokes, whereas that of the latter are Darcy law. An efficient, simple, and stable algorithm has been proposed to track the surface elevation in Cartesian coordinate system by which the water elevation in each computational column has been computed along with the other pressure unknowns simultaneously. The surface position has not been considered to remain in a specific layer so the number of cells in each column have been variably adjusted in accordance with the water surface elevation. Performance of the coupled model has been validated against a range of hydrodynamic problems including propagation of linear short wave, seepage test, tidal oscillation in a lagoon system, gravity current, and saltwater intrusion. Comparison between numerical results, analytical solutions, and experimental data demonstrates that the model represents well the interacting surface water and ground water flow and solute transport processes.     

A Novel Visible Range FRET Probe for Monitoring Acid Sphingomyelinase Activity in Living Cells

Activity of acid sphingomyelinase has been implicated in a number of diseases like acute lung injury, sepsis or metastasis of melanoma cells. Here, we present a sphingomyelinase FRET probe based on FAM/BODIPY dyes for real-time monitoring of acid sphingomyelinase. The probe gives rise to a tremendous increase in fluorescence of the fluorescein FRET donor upon cleavage and we show that this is, to a significant part, due to cleavage-associated phase transition, suggesting a more systematic consideration of such effects for future probe development. The probe allows for the first time to monitor relative sphingomyelinase activities of intact living cells by flow cytometry.     

Development of poly(urethane-ester)amide from corn oil and their anticorrosive studies

Corn oil-based poly(urethane-ester)amide was synthesized from corn oil-based fatty amide diol, camphoric acid, and tolylene 2,4-diisocyanate. The structure of corn polyesteramide and corn poly(urethane-ester)amide (CPEA) was confirmed by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopic techniques. CPUEA coatings were made on mild steel strips and their physicomechanical analysis (scratch hardness, impact test, conical mandrel test, and pencil hardness tests) was performed by standard methods. The surface morphology of coatings was observed by scanning electron microscopy and thermal stability was assessed by thermogravimetric analysis/differential scanning calorimetry. Anticorrosion properties of CPUEA were observed in acidic, saline, and tap water medium at room temperature using potentiodynamic polarization technique. The results of CPUEA coatings exhibit good physicomechanical and anticorrosive properties and can find application up to 175°C.     

Determination of lewisite metabolite 2-chlorovinylarsonous acid in urine by use of dispersive derivatization liquid-liquid microextraction followed by gas chromatography–mass spectrometry

The purpose of this study was to develop a sensitive and simple method, based on dispersive derivatization liquid-liquid microextraction–gas chromatography–mass spectrometry (DDLLME–GC–MS) in scanning and selected-ion-monitoring (SIM) modes, for detection of 2-chlorovinylarsonous acid (CVAA) as a hydrolysis product and urinary metabolite of lewisite in urine samples. Chloroform (65 μL), methanol (500 μL), and ethanedithiol (10 μL) were used as extraction solvent, dispersive solvent, and derivatizing reagent, respectively. Critical conditions of the proposed method were optimized. The nucleophilic reactions of dithiol and monothiol compounds with CVAA were also studied using a competitive method. In view of the high affinity of trivalent arsenic for sulfhydryl groups, the interaction between CVAA and bis(2-chlorovinyl)arsonous acid (BCVAA) and free cysteine (Cys) was also investigated using liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS). The interference of Cys, present in human urine, with the detection of CVAA was evaluated using dithiol and monothiol chemicals as derivatization agents. The developed method provided a preconcentration factor of 250, and limits of detection of 0.015 and 0.30 μg L^?1 in SIM and scanning modes, respectively. The calibration curves were linear over the concentration range of 1–400 μg L^?1 in full-scan mode. The relative standard deviation (RSD) values were calculated to be 5.5 and 3.2 % at concentrations of 20 and 100 μg L^?1, respectively. Collision-induced dissociation studies of the major electron-impact (EI) ions were performed to confirm the proposed fragment structure of CVAA-dithiols derivatives. Results indicated that the developed method for analysis of CVAA is suitable not only for verification of human exposure to lewisite, but also for quantification of CVAA in urine samples.

pn-Junction photodiode based on GaN grown on Si (111) by plasma-assisted molecular beam epitaxy

The growth and characterization of pn-junction photodiode based on GaN grown on Si (111) by RF-plasma assisted molecular beam epitaxy (MBE) are described. The structural and optical properties of samples were studied by HR-XRD and Fourier FTIR spectroscopy, respectively. For IR reflectance analysis, GaN-like and AlN-like E₂ TO optical modes have been detected. By using the thermal evaporator, Ni/Ag and Al contacts were evaporated at the front and back of samples. The application of thermal annealing treatment in oxygen ambient has been shown to significantly reduce the dark current of GaN pn-junction photodiode. The electrical characteristics of all samples were conducted using Keithley's I–V measurement system. Under 460-nm wavelength, at bias voltages of 0.5, 1, and 2 V, the photocurrents rise and decay times were investigated.     

An ultra-low power energy-efficient microsystem for hydrogen gas sensing applications

This paper presents a fully integrated power management and sensing microsystem that harvests solar energy from a micro-power photovoltaic module for autonomous operation of a miniaturized hydrogen sensor. In order to measure H₂ concentration, conductance change of a miniaturized palladium nanowire sensor is measured and converted to a 13-bit digital value using a fully integrated sensor interface circuit. As these nanowires have temperature cross-sensitivity, temperature is also measured using an integrated temperature sensor for further calibration of the gas sensor. Measurement results are transmitted to the base station, using an external wireless data transceiver. A fully integrated solar energy harvester stores the harvested energy in a rechargeable NiMH microbattery. As the harvested solar energy varies considerably in different lighting conditions, the power consumption and performance of the sensor is reconfigured according to the harvested solar energy, to guarantee autonomous operation of the sensor. For this purpose, the proposed energy-efficient power management circuit dynamically reconfigures the operating frequency of digital circuits and the bias currents of analog circuits. The fully integrated power management and sensor interface circuits have been implemented in a 0.18 μm CMOS process with a core area of 0.25 mm². This circuit operates with a low supply voltage in the 0.9–1.5 V range. When operating at its highest performance, the power management circuit features a low power consumption of less than 300 nW and the whole sensor consumes 14.1 μA.     

An off-line NMPC strategy for continuous-time nonlinear systems using an extended modal series method

This paper presents a new off-line nonlinear model predictive control (NMPC) approach for continuous-time affine-input nonlinear systems. In this approach, the NMPC-related nonlinear two-point boundary value problem derived from the Pontryagin’s maximum principle is solved by the extended modal series method. The resulting suboptimal control law explicitly depends on the initial conditions and is updated by replacing the initial conditions with the new state measurements in future sampling instants. Therefore, there is no need to repeat the recursive online optimization process in each sampling instant. Since the applicability of NMPC is generally restricted by computational burden of the online optimization, we propose an NMPC scheme, which not only reduces the online computational burden significantly, but also can be applied to fast dynamic systems with short prediction horizons. An efficient algorithm is presented which approximates the order of the modal series such that feasibility of the optimization problem is guaranteed. Closed-loop stability of the proposed NMPC approach is shown using the off-line terminal region calculations suggested in quasi-infinite horizon NMPC scheme. The applicability and effectiveness of the proposed approach are illustrated by two numerical examples.     

Water Expandable Polystyrene-Organoclay Nanocomposites: Role of Clay and Its Dispersion State

A published process for preparing expandable polystyrene containing water as a blowing agent was applied to synthesize water expandable polystyrene-organoclay nanocomposites (WEPS-OCN). Organoclay was uniformly dispersed in styrene monomer. During suspension polymerization, water was trapped in the polystyrene (PS) matrix through the use of starch, ending up with spherical PS-organoclay beads. By selecting organoclays with various surfactants and modifier concentrations, different distribution states of nanoclay in the PS matrix, from cluster (poor dispersion) to either intercalated (limited dispersion) or exfoliated (full dispersion) were obtained. The incorporation of organoclay led to higher water content in the expandable beads. However, as expected, the flammability of the expanded product was increased with organoclay content. Furthermore, the results showed that the average unexpanded bead size, density of preexpanded beads, foam cell morphology, and flammability were directly influenced by the dispersion status of the organoclay. The best results were obtained when full dispersion (exfoliation) of nanoclay in PS matrix occurred.     

Parameters affecting carbofuran photocatalytic degradation in water using ZnO nanoparticles

Carbofuran photodegradation in water using zinc oxide nanoparticles as a catalyst was examined as well as some parameters influencing its percentage degradation rate such as zinc oxide load, initial concentration of carbofuran, the temperature of the reaction, the initial pH of the solution, and doping of zinc oxide nanoparticles with 5% (w:w) silver. Zinc oxide and Ag-doped zinc oxide nanoparticles were produced using solvothermal and photoreduction methods, respectively, and silver doping effects on the structural, optical, and photocatalytic properties of zinc oxide nanoparticles were investigated using XRD, UV-VIS spectrophotometer, TEM, SEM, SEM/EDX, and FTIR. The average diameter of the synthesized samples was 26.6, 30.55 nm for undoped zinc oxide and Ag-doped zinc oxide, respectively. Zinc oxide doping with silver did not change the shape of the zinc oxide crystal, but decreased the reflection in the visible region, as well as the energy of the bandgap, and increased the zinc oxide photocatalytic activity.     

Magnetic polystyrene nanocapsules with core-shell morphology obtained by emulsifier-free miniemulsion polymerization

Nanocapsules containing hexadecane and Fe₃O₄ magnetic nanoparticles as core materials and polystyrene as shell were produced in a new method through emulsifier-free miniemulsion polymerization using 2,2′-azobis(2-amidinopropane) dihydrochloride (V-50) as a water-soluble initiator. The effect of some parameters such as the amounts of Fe₃O₄ and initiator on morphology of resulting nanocapsules was studied. Transmission electron microscopy showed that the products had latex particles having a size range of about 300–1300 nanometer and both magnetic nanocapsules with core-shell morphology and solid particles. The phase transition temperature and phase transition heat of the produced capsules were determined by differential scanning calorimetric analyses. Thermal properties of the latex were compared with those of magneticparticles-free latex and with those of latex free of both magnetic particles and hexadecane. Thermogravimetric analysis was also used to confirm the encapsulation and to determine the amounts of hexadecane and Fe₃O₄ within the capsules.