动力学体系中双组份的协同效应研究及其分析应用

用停流ＦＩＡ－分光光度法研究了铬（Ⅵ）－碘化钾动力学反应体系中铁(Ⅱ)和钒(Ⅳ)的协同诱导效应，以协同系数（Ｄ）表示二者相互作用程度的大小，在此基础上提出了一种新的动力学双组份同时测定的方法，本法可扩大前述方法的线性范围，并降低检测限，测定了模拟水样品中铁和钒的含量，结果满意。     

Matrix Effects and Behaviors of Elements in Oxalic Acid Medium by Inductively Coupled Plasma Mass Spectrometry

Because of its high sensitivity, wide dynamic range and relative freedom from interferences, inductively coupled plasma mass spectrometry (ICP-MS) has been developed for the determination of trace and ultra-trace levels of elements in various fields1. Due…     

钇对2618合金组织及性能的影响

采用X射线，光学显微镜及扫描电镜等手段研究了2618合金中的组织与相结构，并研究了元素钆在2618合金中的存在形式及其对合金力学性能的影响。结果表明，微量钆元素在铝合金中是以化合物形式存在的；钆对合金中的铸态组织及Al9FeNi仃形态没有影响。由于微量钆的加入，降低了铜与镁在2618合金中的固溶量，减少了时效析出相A2CuMg数量，从而降低2618合金的室温强度帮在250℃的高温瞬时强度；但由于微量钆减少了铜与镁在2618合金中的扩散速度，延缓了时效机的粗化，并由于第二相数量的增多，因此提高了2618合金在250℃经100h高温热暴露后的高温瞬时强度。     

电感耦合等离子体质谱法测定无尘产品中痕量氯

研究了利用电感耦合等离子体质谱仪测定无尘产品中的痕量杂质元素氯含量的方法,检测下限0.06 ng/mL,精密度RSD<5%(n=7),回收率93.7%~110.0%。     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

离子性指数、极化效应指数烷烃^13C NMR化学位移的 关系研究

定义了烷烃分子中碳原子的离子性指数(INI)，用离子性指数(INI)、极化效应指数(PEI)及N^i~H(i=αβΥ)结构信息参数研究了烷烃的^13CNMR化学位移模型，结果表明，烷烃^13CNMR化学位移(CS)可用下式来定量描述：CS=194.6156-37.7394(INI)+98.6505(ΣPEI)+27.1630(INI/ΣPEI)-652.9106(ΣPEI/INI)+0.7735N^α~H+2.2468N^β~H-0.1742N^γ~H。用上式估算了304个碳原子的化学位移，平均绝对误差仅为0.77δ，标准差0.9860δ，预测值与实验值非常吻合。     

光度分析中协同系数补偿方法的研究──三次标准加入法同时测定钼、钨和钛

本文在两次标准加入法[1]的基础上，提出了三组份同时测定的三次标准加入法，并应用于钼、钨和钛的流动注射同时测定。测定条件：［水杨基荧光酮（SAF）］＝1．25　×10-4mol／L，［溴化＋六烷基三甲基铵（CTMAB）」＝2．5×10－3mol／L，pH1．35，25℃，采样、进样时间分别为10s和18s，进样频率128次／h。为消除组份间协同作用引起的吸光度加合性的偏离，定义了三组份协同系数。将其引入三组份同时测定方法，补偿了吸光度对线性的偏离。补偿后钼、钨和钛的测定范围分别为0．05～0．35，0．25～1．00，0．025～0．30mg／L。测定了钢样及模拟样品中钼、钨和钛含量，结果较好。     

一种新型的表面声波阻抗传感器及其在液相体系中的应用

一种新型的表面声波阻抗传感器及其在液相体系中的应用姚守拙，陈康，刘德忠，聂利华（湖南大学化学化工系，长沙，４１００８２）关键词表面声波，阻抗传感器，液相应用表面声波传感器（ＳＡＷＳ）具有较高的灵敏度和检测精度，已广泛应用于气体微量组分分析、色谱检测和...     

Piezoelectric Fiber－optic Spectroelectrochemistry──A New Technique of Spectroelectrochemistry in Combination With Piezoelectric Quartz Crystal Detection

ＰｉｅｚｏｅｌｅｃｔｒｉｃＦｉｂｅｒ－ｏｐｔｉｃＳｐｅｃｔｒｏｅｌｅｃｔｒｏｃｈｅｍｉｓｔｒｙ──ＡＮｅｗＴｅｃｈｎｉｑｕｅｏｆＳｐｅｃｔｒｏｅｌｅｃｔｒｏｃｈｅｍｉｓｔｒｙｉｎＣｏｍｂｉｎａｔｉｏｎＷｉｔｈＰｉｅｚｏｅｌｅｃｔｒｉｃＱｕａｒｔｚＣｒ...     

Piezoelectric transmission spectroelectrochemistry with a normal piezoelectric quartz crystal as an optically-transparent electrode

Piezoelectric transmission spectroelectrochemistry (PTSEC), i.e., the combination of electrochemistry and spectroelectrochemistry (SEC) with electrochemical quartz crystal microbalance (EQCM) technique is reported by using a normal piezoelectric quartz crystal (PQC) as an optically-transparent electrode (OTE). A theoretical relationship between the PQC response and the spectroelectrochemical response is derived and used to estimate the apparent molar absorptivity of the absorbing species deposited on the OTE on the PQC surface. The complex of copper with aspartic acid is used to test this new PQC-SEC technique. Results show that the combination of three such diverse techniques provides a very useful methodology for studying electrode processes and electrode surface characteristics in situ.