旋涂法制备WO3薄膜电致变色性能

"智能窗"大规模推广顺应可持续发展潮流,三氧化钨(WO_3)是生产"智能窗"的一种重要电致变色材料,但调控WO_3薄膜电致变色性能机制仍待进一步研究。采用旋涂法制备WO_3薄膜,重点研究了溶液浓度和旋涂次数对调控WO_3薄膜电致变色性能的影响。通过表面轮廓仪测量薄膜厚度,X射线衍射(XRD)测量薄膜结晶情况,原子力显微镜(AFM)和扫描电子显微镜(SEM)分析薄膜表面形貌,光谱仪测量薄膜初始态、着色态和褪色态的透射率。实验结果表明,随着溶液浓度增加(0. 2～1. 0 mol/L),薄膜厚度从9. 7 nm增加到33. 3 nm,透射率调制能力从0%提升到37. 0%;多次旋涂薄膜厚度线性增长,线性拟合优度(R~2)达0. 98,5次旋涂后透射率调制能力达51. 3%。改变溶液浓度和旋涂次数都是调控薄膜透射率调制能力的有效手段,精准调控薄膜透射率调制能力对设计不同应用场景的电致变色器件具有重大意义。     

Non-isothermal crystallization behaviors and spherulitic morphology of poly(lactic acid) nucleated by a novel nucleating agent

Journal of Thermal Analysis and Calorimetry - The effect of cadmium phenylmalonate (PMA-Cd) as a novel nucleating agent on the crystallization behaviors and spherulitic morphology of poly(lactic...     

Changes in Phenols,Polysaccharides and Volatile Profiles of Noni (Morinda citrifolia L.) Juice during Fermentation

The change in phenols, polysaccharides and volatile profiles of noni juice from laboratory- and factory-scale fermentation was analyzed during a 63-day fermentation process. The phenol and polysaccharide contents and aroma characteristics clearly changed according to fermentation scale and time conditions. The flavonoid content in noni juice gradually increased with fermentation. Seventy-three volatile compounds were identified by solid-phase microextraction coupled with gas chromatography–mass spectrometry (SPME-GC-MS). Methyl hexanoate, 3-methyl-3-buten-1-ol, octanoic acid, hexanoic acid and 2-heptanone were found to be the main aroma components of fresh and fermented noni juice. A decrease in octanoic acid and hexanoic acid contents resulted in the less pungent aroma in noni juice from factory-scale fermentation. The results of principal component analysis of the electronic nose suggested that the difference in nitrogen oxide, alkanes, alcohols, and aromatic and sulfur compounds, contributed to the discrimination of noni juice from different fermentation times and scales.     

Charge-transfer complex coupled between polymer and H-aggregate molecular crystals

Crystal needles of N,N′-bis(1-ethylpropyl)-3,4,9,10-perylenebis(dicarboximide) (EPPTC) are produced through p-stacking and are embedded in the thin film of poly(9,9-din-hexylfluorenyl-2,7-diyl) (PFO) when the blend solution of EPPTC and PFO in p-xylene is spin-coated onto a glass substrate. Charge transfer (CT) complex is resolved from the spectroscopic response of the blend film, which is generated only when the PFO molecules are excited. Thus, the PFO molecules are specified as donors and the H-aggregated EPPTC as acceptors in the formation of CT state (CTS). The emission resulting from the CTS in the red is further recognized by its much longer lifetime than both the intrinsic emission of the individual EPPTC molecules and that of their pure aggregates. Near-field analysis verifies that the CTS form on the boundary between the PFO and the crystal phases. The CT exciton forms by bounding the hole left on HOMO of the donor (PFO) and the indirectly transferred electron to the H-aggregate state of EPPTC, which transits back to the ground state by emitting a photon at about 650 nm. This introduces special physics in the heterojunctions that are coupled with the H-aggregates and mechanisms important for the design of organic photovoltaic devices. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Oxygen consumption and chemisorption in low-temperature oxidation of sub-bituminous pulverized coal

Studying the effect of oxygen in coal oxidation is very important for understanding and controlling coal spontaneous combustion. However, the oxygen effect is not very easy to determine clearly due to the large effect of heat source on coal oxidation in temperature rising experiments. Here, focused on sub-bituminous coal, the oxygen effect was separated from coal oxidation by continuously measuring FTIR spectra of coal with respect to varying temperatures and under oxygen and nitrogen. The active groups’ real-time changes of coal oxidation, thermal treatment and oxygen effect were measured. The carboxylic ester and carboxyl units are the main functional groups that increase with temperatures increasing under oxygen and nitrogen, while the other functional groups decrease in quantity. The oxygen effect promoted the consumption of aliphatic hydrocarbons and hydroxyl groups and also promoted the formation of oxygen-containing groups (except hydroxyl). Four characteristic temperature stages involved in the oxygen effect and their key functional groups were identified. Simultaneously, the relationship of oxygen consumption and chemisorption in oxygen effect was analyzed. The starting temperature of oxygen chemisorption is between 50 and 60°C. The maximum contribution of oxygen effect was observed in methyl and methylene groups. These results are important for chemical control of coal spontaneous combustion. The oxidation of aliphatic hydrocarbon should be controlled before oxygen chemisorption. The value of oxygen consumption between 70 and 80°C can be measured accurately due to the constant chemisorption rate, which help to identify the tendency for spontaneous combustion. These results will help in better understanding of the reaction mechanism of coal oxidation, especially the oxygen effect.     

LYVE-1 在甲状腺乳头状癌的表达和意义

目的 观察淋巴管透明质酸受体1（LYVE-1）的表达和癌周组织中淋巴管的生成情况在甲状腺恶性肿瘤的变化及转 移中的作用。方法 应用免疫组织化学和real-time PCR方法检测45 例甲状腺乳头状癌中央区、癌周边区和正常甲状腺组织中的LYVE-1及其mRNA 表达情况,并计算淋巴管密度（LVD）。结果 甲状腺乳头状癌周边区LVD 高于甲状腺乳头状癌中央区,而正常组织中很少见LYVE-1 阳性的微淋巴管;甲状腺乳头状癌周边区LVD 与淋巴结转移有密切关系（P＜0.05）。结论 LYVE-1是一种特异性较高的淋巴管内皮特异性标志物,对淋巴管生成促进甲状腺乳头状癌的淋巴结转移。     

基于TDOA/TSOA的ADS-B虚假信号检测技术研究

广播式自动相关监视(ADS-B)开放式监视构架的特点使其面临易受人为虚假欺骗的安全性挑战。本文设置多个ADS-B基站,利用ADS-B信号的到达时间差(TDOA)与到达时间和(TSOA)对飞机实际位置进行多点定位,与ADS-B信号解码所得位置信息进行比对,从而剔除虚假飞机目标。首先实现ADS-B基站间的时间同步,建立基于TDOA/TSOA的定位模型与算法,给出了利用Friedlander算法获取初值的改进的Taylor级数算法以获取飞机位置。运用蒙特卡洛方法进行了四基站和五基站的仿真实验,结果表明,与现有Taylor级数算法相比,改进算法能提供更精确的飞机位置,并且五基站的定位性能要优于四基站的定位性能。     

基于雷达点迹置信度统计的目标检测方法

低信噪比环境中对弱小目标的检测和跟踪已经在雷达数据处理领域中引起人们的广泛关注。检测前跟踪(TBD)方法对弱小目标的检测非常有效,其基本思想是为了避免恒虚警(CFAR)处理带来的信噪比损失,直接对原始数据进行检测。提出了点迹置信度方法对检测的原始数据进行量化,通过局部极值选取完成目标检测。