Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.     

A new resource allocation scheme based on a PSNR criterion forwireless video transmission to stationary receivers over Gaussianchannels

A new resource allocation scheme is proposed for video service over a Gaussian channel. For video quality rating, we introduce a suitable metric: the average peak signal-to-noise ratio (PSNR) or the average channel-induced PSNR degradation. Then, we model the end-to-end distortion considering the error propagation effect caused by motion compensation. On the basis of this model, we propose an efficient resource allocation scheme for real video service. Unlike conventional schemes, the new scheme satisfies the PSNR requirement of each video user by adjusting the bit-error rate level with the changes of image characteristics. Simulation results show that the proposed scheme utilizes the bandwidth more efficiently than conventional schemes     

Noise bandwidth suppression for low noise readout circuit

A new noise reduction circuit that suppresses noise bandwidth of the output stage is proposed for the readout circuit of an infrared detector operating at a high pixel rate. Using this circuit, it is found that the rms noise voltage of the output stage is effectively reduced from 87 to 52 μV at a pixel rate of 10 pixel/μs     

Simulation and design methodology for a 50-Gb/s multiplexer/demultiplexer package

A 50 Gb/s package for SiGe BiCMOS 4:1 multiplexer and 1:4 demultiplexer targeting SONET OC-768 serial communication systems is introduced in this work. The package was designed to facilitate bit-error-rate tests and constructed with high-speed coaxial connectors, transmission lines on ceramic substrate, ribbon bonds for chip-to-package interconnects, and a metal composite housing. Numerical simulations were conducted to guide the package design, and both small signal measurements and operational tests were performed thereafter to verify the design and modeling concepts. To keep the model structure under the existing computing capability, the simulation was segmented into three sections - coaxial connector to transmission line, transmission line alone, and transmission line to ribbon bond, and then the results were assembled to predict the performance of the entire package. The package was operated up to 50 Gb/s with low degradation to input digital waveforms and free of error.     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

Validation of 3-D curved objects: CAD model and fabricatedworkpiece

This paper proposes a new method to describe and identify a 3-D curved object for the purpose of validating a fabricated object to the design specification. Curved 3-D objects are, in general, difficult to represent and identify because they lack distinct properties such as edges, planes, or cylindrical surfaces which are the building blocks in representing objects. In this paper, the authors propose to use principal axes of a 3-D object to establish a reference for the representation. A method of obtaining an inertia matrix from a 3-D range image is developed. The unique set of principal axes is obtained from the inertia matrix of an object with an arbitrary 3-D position and orientation, and the object can be described uniquely on these principal axes. On the principal axes, an object is described by a set of features describing the shape of the object such as spine, section size, section orientation, and section contraction. The features are used for comparing two objects for the validation purpose. The authors also propose a direct measure of similarity between two objects as a mean-squared difference of radii. As an experiment, two 3-D object models are designed through a CAD package, and fabricated objects are compared with the designed models for validation purposes     

Controller for digital audio power amplifier with bit stream input

A new controller for a digital audio amplifier with bit stream input is proposed. The proposed controller has excellent features such as wide error correction range and no limitation on the modulation index. The controller is implemented in the half-bridge class-D amplifier and performance is verified through experiments.     

Wilcoxon signed rank test using ranked-set sample

Ranked-set sampling is useful when measurements are destructive or costly to obtain but ranking of the observations is relatively easy. The Wilcoxon signed rank test statistic based on the ranked-set sample is considered. We compared the asymptotic relative efficiencies of the RSS Wilcoxon signed rank test statistic with respect to the SRS Wilcoxon signed rank test statistic and the RSS sign test statistic. Throughout the ARE’s, the proposed test statistic is superior to the SRS Wilcoxon signed rank test statistic and the RSS sign test statistic.     

A 17-GHz Push–Push VCO Based on Output Extraction From a Capacitive Common Node in GaInP/GaAs HBT Technology

This paper presents a new push-push voltage-controlled oscillator (VCO) technique that extracts a second harmonic output signal from a capacitive common node in a negative-g_m oscillator topology. The generation of the second harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing: 1) significant voltage clipping and 2) different rise and fall times during the switching operation of the core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region than a conventional push-push technique using an emitter common node. A prototype 17-GHz VCO realized in GaInP/GaAs HBT technology produces an output power of -6dBm and a phase noise of -110.4dBc/Hz at 1-MHz offset, which is equivalent to a VCO figure-of-merit of -184.3dBc/Hz, while drawing 4.38 mA from a 3.0-V supply