A step-and-repeat UV-nanoimprint lithography process using an elementwise patterned stamp

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising cost-effective method for defining nanoscale structures at room temperature and low pressure. To apply a large-area stamp to a high throughput step-and-repeat process at atmospheric conditions, we proposed a new UV-NIL process that uses an elementwise patterned stamp (EPS), which consists of elements separated by channels, and additive gas pressurization. The proposed UV-NIL process required just four imprints to press an 8-in. wafer. EPS features measuring 50-80 nm were successfully transferred onto the wafers. The experiments demonstrated that a 5 × 5-in.² EPS could be used with a step-and-repeat UV-NIL process to imprint 8-in. wafers under atmospheric conditions.     

Evaluation of Geometric Modeling for KOMPSAT‐1 EOC Imagery Using Ephemeris Data

Using stereo images with ephemeris data from the Korea Multi‐Purpose Satellite‐1 electro‐optical camera (KOMPSAT‐1 EOC), we performed geometric modeling for three‐dimensional (3‐D) positioning and evaluated its accuracy. In the geometric modeling procedures, we used ephemeris data included in the image header file to calculate the orbital parameters, sensor attitudes, and satellite position. An inconsistency between the time information of the ephemeris data and that of the center of the image frame was found, which caused a significant offset in satellite position. This time inconsistency was successfully adjusted. We modeled the actual satellite positions of the left and right images using only two ground control points and then achieved 3‐D positioning using the KOMPSAT‐1 EOC stereo images. The results show that the positioning accuracy was about 12‐17 m root mean square error (RMSE) when 6.6 m resolution EOC stereo images were used along with the ephemeris data and only two ground control points (GCPs). If more accurate ephemeris data are provided in the near future, then a more accurate 3‐D positioning will also be realized using only the EOC stereo images with ephemeris data and without the need for any GCPs.     

Implementation of mmWave long-range backhaul for UAV-BS

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.     

Microstructure Controlled Porous Silicon Particles as a High Capacity Lithium Storage Material via Dual Step Pore Engineering

To overcome the lithium storage barriers of current lithium‐ion batteries, it is imperative that conventional low capacity graphite anodes be replaced with other higher capacity anode materials. Silicon is a promising alternative anode material due to its huge energy densities; however, its lithium‐concentration‐dependent volumetric changes can induce severely adverse effects that lead to drastic degradations in capacity during cycling. The dealloying of Si–metal alloys is recently suggested as a scalable approach to fabricate high‐performance porous Si anode materials. Herein, a microstructure controlled porous Si is developed by the dealloying in conjunction with wet alkaline chemical etching. The resulting 3D networked structure enables enhancement in lithium storage properties when the Si‐based material is applied not only as a single active material but also in a graphite‐blended electrode.     

Simultaneous Optimization of Luminance and Color Chromaticity of Phosphors Using a Nondominated Sorting Genetic Algorithm

Acquiring materials that simultaneously meet two or more conflicting requirements is very difficult. For instance, a situation wherein the color chromaticity and photoluminescence (PL) intensity of phosphors conflict with one another is a frequent problem. Therefore, identification of a good phosphor that simultaneously exhibits both desirable PL intensity and color chromaticity is a challenge. A high‐throughput synthesis and characterization strategy that was reinforced by a nondominated sorting genetic algorithm (NSGA)‐based optimization process was employed to simultaneously optimize both the PL intensity and color chromaticity of a MgO–ZnO–SrO–CaO–BaO–Al₂O₃–Ga₂O₃–MnO system. NSGA operations, such as Pareto sorting and niche sharing, and the ensuing high‐throughput synthesis and characterization resulted in identification of promising green phosphors, i.e., Mn²⁺‐doped AB₂O₄ (A = alkali earth, B = Al and Ga) spinel solid solutions, for use in either plasma display panels or cold cathode fluorescent lamps.     

Cooperative Decode‐and‐Forward Relaying for Secure Multicasting

In this paper, secure multicasting with the help of cooperative decode‐and‐forward relays is considered for the case in which a source securely sends a common message to multiple destinations in the presence of a single eavesdropper. We show that the secrecy rate maximization problem in the secure multicasting scenario under an overall power constraint can be solved using semidefinite programing with semidefinite relaxation and a bisection technique. Further, a suboptimal approach using zero‐forcing beamforming and linear programming based power allocation is also proposed. Numerical results illustrate the secrecy rates achieved by the proposed schemes under secure multicasting scenarios.     

A personal communications network using a Ka-bandsatellite

The feasibility of a personal communications network using portable terminals that can provide 4.8 kb/s voice communications to a hub station via Ka-band geosynchronous satellite has been investigated. Tradeoffs are examined so that the combined system of hub and gateway earth stations, the satellite, and the personal terminals can provide a competitive service in terms of cost, availability, and quality. A baseline system that uses a spacecraft with approximately 140 spot beams to cover the contiguous US (CONUS) and 5 W power amplifiers in each beam is described. Satellite access in both the forward and return directions uses frequency-division multiple-access/code-division multiple-access (FDMA/CDMA) with a chip rate of 2.5 Mchip/s