Improvement of linewidth enhancement factor in 1.55-μmmultiple-quantum-well laser diodes

The improvement of the linewidth enhancement factor in complex-coupled laser diode (CC-LD), or loss-coupled, was confirmed by measuring the spontaneous emission spectra below threshold from the sidewall of laser diodes. In addition, the serial resistance of the device was measured. The linewidth enhancement factor is improved by the presence of a light absorbing InGaAs grating for loss coupled distributed-feedback (DFB) laser diode (LD). We report the comparison of the linewidth enhancement factors of Fabry-Perot (FP) LD, conventional DFB-LD, and loss coupled DFB-LDs     

Hydrogen-bonding-driven self-assembly of PEGylated organosilica nanoparticles with poly(acrylic acid) in aqueous solutions and in layer-by-layer deposition at solid surfaces

PEGylated organosilica nanoparticles have been synthesized through self-condensation of (3-mercaptopropyl)trimethoxysilane in dimethyl sulfoxide into thiolated nanoparticles with their subsequent reaction with methoxypoly(ethylene glycol) maleimide. The PEGylated nanoparticles showed excellent colloidal stability over a wide range of pH in contrast to the parent thiolated nanoparticles, which have a tendency to aggregate irreversibly under acidic conditions (pH < 3.0). Due to the presence of a poly(ethylene glycol)-based corona, the PEGylated nanoparticles are capable of forming hydrogen-bonded interpolymer complexes with poly(acrylic acid) in aqueous solutions under acidic conditions, resulting in larger aggregates. The use of hydrogen-bonding interactions allows more efficient attachment of the nanoparticles to surfaces. The alternating deposition of PEGylated nanoparticles and poly(acrylic acid) on silicon wafer surfaces in a layer-by-layer fashion leads to multilayered coatings. The self-assembly of PEGylated nanoparticles with poly(acrylic acid) in aqueous solutions and at solid surfaces was compared to the behavior of linear poly(ethylene glycol). The nanoparticle system creates thicker layers than the poly(ethylene glycol), and a thicker layer is obtained on a poly(acrylic acid) surface than on a silica surface, because of the effects of hydrogen bonding. Some implications of these hydrogen-bonding-driven interactions between PEGylated nanoparticles and poly(acrylic acid) for pharmaceutical formulations are discussed.     

Artificial convolution neural network techniques and applications for lung nodule detection

We have developed a double-matching method and an artificial visual neural network technique for lung nodule detection. This neural network technique is generally applicable to the recognition of medical image pattern in gray scale imaging. The structure of the artificial neural net is a simplified network structure of human vision. The fundamental operation of the artificial neural network is local two-dimensional convolution rather than full connection with weighted multiplication. Weighting coefficients of the convolution kernels are formed by the neural network through backpropagated training. In addition, we modeled radiologists' reading procedures in order to instruct the artificial neural network to recognize the image patterns predefined and those of interest to experts in radiology. We have tested this method for lung nodule detection. The performance studies have shown the potential use of this technique in a clinical setting. This program first performed an initial nodule search with high sensitivity in detecting round objects using a sphere template double-matching technique. The artificial convolution neural network acted as a final classifier to determine whether the suspected image block contains a lung nodule. The total processing time for the automatic detection of lung nodules using both prescan and convolution neural network evaluation was about 15 seconds in a DEC Alpha workstation.     

Effects of co-substitution on the electrical properties of BiFeO3 thin films prepared by chemical solution deposition

Ferroelectric BiFeO₃ thin films with Nd-Cr (or Sm-Cr) co-substitution (denoted by BNdFCr and BSmFCr, respectively) were deposited on the Pt(2 0 0)/TiO₂/SiO₂/Si(1 0 0) substrates by a chemical solution deposition method. X-ray diffraction patterns revealed the formation of BNdFCr and BSmFCr thin films without any secondary phases. The co-substituted BNdFCr (or BSmFCr) thin films, which were annealed at 550 °C for 30 min in N₂ atmosphere, exhibited enhanced electrical properties compared to BFO thin films with the remanent polarization (2P_r) and coercive electric field (2E_c) of 196, 188 μC/cm² and 600, 570 kV/cm with the electric field of 800 kV/cm, respectively. The leakage current densities of BNdFCr and BSmFCr thin films measured at room temperature were approximately three orders of magnitude lower than that of BFO thin film, and the leakage current at room temperature of the thin films exhibited three distinctive conduction behaviors. Furthermore, the values of pulse polarizations [i.e., +(P*-P^{^}) or −(P*-P^{^})] of BNdFCr and BSmFCr thin films were reasonably unchanged up to 1.4 × 10¹⁰ switching cycles.     

A WDM-PON Employing Fabry–PÉrot Laser Diodes Without a Seed Light Injection

We propose and demonstrate a wavelength-division-multiplexed passive optical network by employing double-contact Fabry-Perot laser diodes (F-P LDs) without a seed light injection. To avoid the high mode partition noise at low frequency, we use a binary phase-shift keying as a modulation format at a low relative intensity noise window. An error-free transmission is achieved by compensating a lasing envelope shift due to temperature variation with the double-contact F-P LD.     

Biomimetic Chitin–Silk Hybrids: An Optically Transparent Structural Platform for Wearable Devices and Advanced Electronics

The cuticles of insects and marine crustaceans are fascinating models for man‐made advanced functional composites. The excellent mechanical properties of these biological structures rest on the exquisite self‐assembly of natural ingredients, such as biominerals, polysaccharides, and proteins. Among them, the two commonly found building blocks in the model biocomposites are chitin nanofibers and silk‐like proteins with β‐sheet structure. Despite being wholly organic, the chitinous protein complex plays a key role for the biocomposites by contributing to the overall mechanical robustness and structural integrity. Moreover, the chitinous protein complex alone without biominerals is optically transparent (e.g., dragonfly wings), thereby making it a brilliant model material system for engineering applications where optical transparency is essentially required. Here, inspired by the chitinous protein complex of arthropods cuticles, an optically transparent biomimetic composite that hybridizes chitin nanofibers and silk fibroin (β‐sheet) is introduced, and its potential as a biocompatible structural platform for emerging wearable devices (e.g., smart contact lenses) and advanced displays (e.g., transparent plastic cover window) is demonstrated.     

Multimode basis selection for spatial multiplexing with limited feedback

Proposed is multimode basis selection in which the active bases are selected at the receiver from the common unitary basis set known at both receiving and transmitting ends, conveyed to the transmitter using limited feedback, and assembled into a precoding matrix at the transmitter. It is shown that the proposed multimode basis selection scheme outperforms both multimode antenna selection and Grassmannian multimode precoding in capacity in correlated fading channels without additional complexity and feedback.     

Characterization and Wideband Modeling of Miniaturized LTCC Helical Inductors

We report fabrication of miniaturized low temperature co-fired ceramic helical (3-D) inductors with more than seven layers of helices and the conductor linewidth of 100mum. We achieve the Q_maxLeff/A product ranging from 200 to 370. Such high values are possible thanks to the drastic reduction of the active area and still acceptably large Q_max and self-resonant frequency. High frequency characterization of the inductors is performed up to 12GHz, and a new equivalent circuit model considering vertical electromagnetic coupling between conductors is shown to reproduce all the measured characteristics     

Optimal Biopsy Protocols for Prostate Cancer

Prostate cancer is the second leading cause of cancer-related death among American men. Biopsy for prostate cancer is a procedure known as transrectal ultrasound-guided needle biopsy. Because of the low resolution of ultrasound, the urologist cannot usually distinguish between cancerous and healthy tissue. For this reason, most biopsies follow standard protocols based on long-term experience of physicians. Recent studies indicate that these protocols have a significant rate of false negative diagnoses. In this research we use real prostate specimens removed by prostatectomy to develop a 3-D distribution map of cancer in the prostate, and use this to develop optimized biopsy procedures. The new procedures have detection rates that are significantly higher than those of current procedures, and thus have the potential to increase the rate of early detection of prostate cancer.     

Effect of Precipitation Temperature and Number of Iron Atoms per Molecule on the Structure of Hydrated Iron(III) Oxyhydroxide Ferritin Cores Synthesised in vitro

Hyperfine Interactions - Horse spleen apoferritin was reconstituted with varying numbers of iron atoms per protein shell at 25 and 50°C. Samples with mean particle sizes ranging from...