Gabapentin quantification in human plasma by high-performance liquid chromatography coupled to electrospray tandem mass spectrometry. Application to bioequivalence study

A rapid, sensitive and specific analytical method was developed and validated to quantify gabapentin in human plasma using acetaminophen as an internal standard. The method employs a single plasma protein precipitation. The analytes are chromatographed on a C4 reversed-phase chromatographic column and analyzed by mass spectrometry in the multiple reaction monitoring (MRM) mode. The method has a chromatographic run time of 4 min and a linear calibration curve over the range 50-10 000 ng x ml(-1) (r > 0.999). The between-run precision, based on the relative standard deviation for replicate quality controls, was < or = 4.8 % (200 ng x ml(-1)), 6.0% (1000 ng x ml(-1)) and 4.4% (5000 ng x ml(-1)). The between-run accuracy was +/-2.6, 4.4 and 0.5% for the above-mentioned concentrations, respectively. This method was employed in a bioequivalence study of two gabentin capsule formulations (Progresse from Biosintética, Brazil, as a test formulation, and Neurotin from Parke-Davis, as a reference formulation) in 24 healthy volunteers of both sexes who received a single 300 mg dose of each formulation. The study was conducted using an open, randomized, two-period crossover design with a 7-day washout interval. The 90% confidence interval (CI) of the individual ratio geometric mean for Progresse/Neurotin was 87.9-115.6% for AUC(0-36 h) and 88.6-111.7% for Cmax. Since both 90% CI for AUC(0-36 h) and Cmax were included in the 80-125% interval proposed by the US Food and Drug Administration, Progresse was considered bioequivalent to Neurotin according to both the rate and extent of absorption.     

Esterification activity and stability of Candida rugosa lipase immobilized into chitosan

Microbial lipase from Candida rugosa immobilized into porous chitosan beads was tested for esterification selectivity with butanol and different organic acids (C2–C12), and butyric acid and different aliphatic alcohols (C2–C10). After 24 h, the acids tested achieved conversions of about 40–45%. Acetic acid was the only exception, and in this case butanol was not consumed. Different alcohols led to butyric acid conversions >40%, except for ethanol, in which case butyric acid was converted only 26%. The system’s butanol and butyric acid were selected for a detailed study by employing an experimental design. The influence of temperature, initial catalyst concentration, and acid:alcohol molar ratio on the formation of butyl butyrate was simultaneously investigated, employing a 2³ full factorial design. The range studied was 37–50°C for temperature (X₁), 1.25–2.5% (w/v) for the catalyst concentration (X₂), and 1 and 2 for the acid:alcohol molar ratio (X₃). Catalyst concentration (X₂) was found to be the most significant factor and its influence was positive. Maximum ester yield (83%) could be obtained when working at the lowest level for temperature (37°C), highest level for lipase concentration (2.5% [w/v]), and center level of acid:alcohol molar ratio (1.5). The immobilized lipase was also used repeatedly in batch esterification reactions of butanol with butyric acid, revealing a half-life of 86 h.     

Intrinsic gas-phase electrophilic reactivity of cyclic N-alkyl- and N-acyliminium ions

The intrinsic gas-phase reactivity of cyclic N-alkyl- and N-acyliminium ions toward addition of allyltrimethylsilane (ATMS) has been compared using MS(2) and MS(3) pentaquadrupole mass spectrometric experiments. An order of electrophilic reactivity has been derived and found to agree with orders of overall reactivity in solution. The prototype five-membered ring N-alkyliminium ion 1a and its N-CH(3) analogue 1b, as well as their six-membered ring analogues 1c and 1d, lack N-acyl activation and they are, accordingly, inert toward ATMS addition. The five- and six-membered ring N-acyliminium ions with N-COCH(3) exocycclic groups, 3a and 3b, respectively, are also not very reactive. The N-acyliminium ions 2a and 2c, with s-trans locked endocyclic N-carbonyl groups, are the most reactive followed closely by 3c and 3d with exocyclic (and unlocked) N-CO(2)CH(3) groups. The five-membered ring N-acyliminium ions are more reactive than their six-membered ring analogues, that is: 2a > 2c and 3c > 3d. In contrast with the high reactivity of 2a, its N-CH(3) analogue 2b is inert toward ATMS addition. For the first time, the transient intermediates of a Mannich-type condensation reaction were isolated-the beta-silyl cations formed by ATMS addition to N-acyliminium ions-and their intrinsic gas-phase behavior toward dissociation and reaction with a nucleophile investigated. When collisionally activated, the beta-silyl cations dissociate preferentially by Grob fragmentation, that is, by retro-addition. With pyridine, they react competitively and to variable extents by proton transfer and by trimethylsilylium ion abstraction-the final and key step postulated for alpha-amidoalkylation. Becke3LYP/6-311G(d,p) reaction energetics, charge densities on the electrophilic C-2 site, and AM1 LUMO energies have been used to rationalize the order of intrinsic gas-phase electrophilic reactivity of cyclic iminium and N-acyliminium ions.     

Quantitation of isomeric ethyl pyridine mixtures by multivariate calibration applied to ion-molecule reaction/collision-induced dissociation triple-stage mass spectra

In reactions of the distonic ion ⁺CH₂OCH₂ with the three isomeric ethyl pyridines, ionized methylene transfer occurs readily yielding distonic N-methylene-ethylpyridinium ions. On-line mass selection and 10 eV collision-induced dissociation (CID) of the CH₂⁺ transfer products yields characteristic fragment ions, which are formed via processes greatly influenced by the ortho, meta or para location of the ethyl substituent in the pyridine ring. Quantitation of mixtures of isomeric 2-, 3-, and 4-ethyl pyridines of varying compositions was then performed by multivariate calibration in the form of the partial least square (PLS) model applied to both single-stage (MS) 70 eV electron ionization (EI) and pentaquadrupole triple-stage sequential ion-molecule reaction/CID product ion mass spectra. The results exemplify the superior ability of combined chemometric analysis and sequential mass spectrometric techniques, which benefits from both characteristic ion chemical reactivity and dissociation behavior, for rapid and accurate quantitation of complex isomeric mixtures.     

Reduction of oxide ions of uranium in single-filament surface-ionization mass spectrometry with application to rock samples

Ion-emission characteristics of a single-filament surface-ionization source for uranium are described. It is shown that a graphite coating over uranium samples enhances reduction of oxides to U⁺ and improves quantitative performance. Results obtained for uranium in several rock samples are in reasonable agreement with results reported by others.     

Vibrational spectra of α-Ge(HPO4)2·H2O compound

We have measured Raman and infrared spectra of α-Ge(HPO₄)₂·H₂O compound at room temperature. The analysis of vibrational modes indicated the presence of two non-equivalent HPO₄²⁻ units in agreement with ³¹P nuclear magnetic resonance measurements. A tentative assignment of all the observed modes is proposed based on the previous works reported for other hydrogenphosphate-based compounds.     

Influence of inhibitory compounds and minor sugars on xylitol production by Debaryomyces hansenii

To obtain in-depth information on the overall metabolic behavior of the new good xylitol producer Debaryomyces hansenii UFV-170, batch bioconversions were carried out using semisynthetic media with compositions simulating those of typical acidic hemicellulose hydrolysates of sugarcane bagasse. For this purpose, we used media containing glucose (4.3-6.5 g/L), xylose (60.1-92.1 g/L), or arabinose (5.9-9.2 g/L), or binary or ternary mixtures of them in either the presence or absence of typical inhibitors of acidic hydrolysates, such as furfural (1.0-5.0 g/L), hydroxymethylfurfural (0.01- 0.30 g/L), acetic acid (0.5-3.0 g/L), and vanillin (0.5-3.0 g/L). D. hansenii exhibited a good tolerance to high sugar concentrations as well as to the presence of inhibiting compounds in the fermentation media. It was able to produce xylitol only from xylose, arabitol from arabinose, and no glucitol from glucose. Arabinose metabolization was incomplete, while ethanol was mainly produced from glucose and, to a lesser less extent, from xylose and arabinose. The results suggest potential application of this strain in xyloseto- xylitol bioconversion from complex xylose media from lignocellulosic materials.     

Evaluation of liquid-liquid extraction process for separating acrylic acid produced from renewable sugars

In this article, the separation and the purification of the acrylic acid produced from renewable sugars were studied using the liquid-liquid extraction process. Nonrandom two-liquids and universal quasi-chemical models and the prediction method universal quasi-chemical functional activity coefficients were used for generating liquid-liquid equilibrium diagrams for systems made up of acrylic acid, water, and solvents (diisopropyl ether, isopropyl acetate, 2-ethyl hexanol, and methyl isobutyl ketone) and the results were compared with available liquid-liquid equilibrium experimental data. Aspen Plus (Aspen Technology, Inc., version 2004.1) software was used for equilibrium and process calculations. High concentration of acrylic acid was obtained in this article using diisopropyl ether as solvent.     

Immobilization of uricase in layer-by-layer films used in amperometric biosensors for uric acid

The layer-by-layer technique was exploited to immobilize the enzyme uricase onto indium tin oxide substrates coated with a layer of Prussian Blue. Uricase layers were alternated with either poly(ethylene imine) or poly(diallyldimethylammoniumchloride), and the resulting films were used as amperometric biosensors for uric acid. Biosensors with optimum performance had a limit of detection of 0.15 μA μmol l⁻¹ cm⁻² with a linear response between 0.1 and 0.6 μM of uric acid, which is sufficient for use in clinical tests. Bioactivity was preserved for weeks, and there was negligible influence from interferents, as detection was carried out at 0.0 V vs saturated calomel electrode. This paper is dedicated to the memory of Francisco C. Nart.     

Photoelectrochemical biosensing platform for the SARS-CoV-2 spike and nucleocapsid proteins

The COVID-19 pandemic is still a continuing worldwide challenge for public health systems. Early and ultrasensitive identification of the infection is essential for preventing the spread of COVID-19 by pre-symptomatic or asymptomatic individuals, particularly in the community and in-home settings. This work presents a versatile photoelectrochemical (PEC) immunosensor for SARS-CoV-2 detection based on a composite material formed by bismuth vanadate (BiVO₄) and strontium titanate (SrTiO₃). The PEC platform was denoted as BiVO₄/SrTiO₃/FTO, and it can be tuned for the detection of either Spike (S) or Nucleocapsid (N) protein by simply altering the antibody immobilized on the platform's surface. Chemical, morphological, and electrochemical characterizations were performed by X-Ray Diffraction, Scanning Electron microscopy, Energy-dispersive X-ray spectroscopy, Electrochemical Impedance Spectroscopy, and Amperometry. With a simple sensing architecture of the PEC platform, it was possible to achieve a linear response range of 0.1 pg mL⁻¹ to 1000 ng mL⁻¹ for S protein and 0.01 pg mL⁻¹ to 1000 ng mL⁻¹ for N protein. The PEC immunosensors presented recovery values for the two SARS-CoV-2 proteins in artificial saliva samples between 97 % and 107.20 % suggesting a good accuracy for the proposed immunosensors.