Practical Study into Enhancing IgG Immobilisation on Screen-Printed Electrodes for Environmental Applications

This work is focused on the influence of pH and applied potential for the immobilisation of rabbit IgG on a carbon screen-printed electrode. The orientation of IgG molecule at the surface is fundamental for activity and reproducibility of the immunosensor. As the electrode potential is increased a particular order may be brought to the immobilised antibodies, i.e. the antibodies adapt a more favourable arrangement on the surface to facilitate better binding. The response increased when changing the pH from basic to acidic medium and the reverse trend was observed for the limit of detection (LOD). When a potential was applied to the electrode, the response generally decreased and the LOD increased in the order acidic > basic > neutral pH. The LODs obtained from antibodies immobilised at acidic pH and + 100 mV were better than the LODs obtained at other conditions.     

S‐Alkylation of Soft Scorpionates

The alkylation reactions of soft scorpionates are reported. The hydrotris(S‐alkyl‐methimazolyl)borate dications (alkyl=methyl, allyl, benzyl), which were prepared by the reaction of Tm^Me anion and primary alkyl halides, have been isolated and structurally characterised. The reaction is, however, not universally successful. DFT analysis of these alkylation reactions (C?S versus B? H alkylation) indicates that the observed outcome is driven by kinetic factors. Extending the study to incorporate alternative imine thiones (mercaptobenzothiazole, bz; thiazoline, tz) led to the structural characterisation of di[aquo‐μ‐aquohydrotris(mercaptobenzothiazolyl)boratosodium], which contains sodium atoms in the κ³‐S,S,S coordination mode. Alkylation of Na[Tbz] and Na[tzTtz] leads to decomposition resulting in the formation of the simple S‐alkylated heterocycles. The analysis of the species involved in these reactions shows an inherent weakness in the B? N bond in soft scorpionates, which has implications for their use in more advanced chemistry.     

Syntheses and Properties of Graphyne Fragments: Trigonally Expanded Dehydrobenzo[12]annulenes

We present herein the synthesis and properties of the largest hitherto unknown graphyne fragment, namely trigonally expanded tetrakis(dehydrobenzo[12]annulene)s (tetrakis‐DBAs). Intramolecular three‐fold alkyne metathesis reactions of hexakis(arylethynyl)DBAs 9 a and 9 b using Fürstner’s Mo catalyst furnished tetrakis‐DBAs 8 a and 8 b substituted with tert‐butyl or branched alkyl ester groups in moderate and fair yields, respectively, demonstrating that the metathesis reaction of this protocol is a powerful tool for the construction of graphyne fragment backbones. For comparison, hexakis(arylethynyl)DBAs 9 c – g have also been prepared. The one‐photon absorption spectrum of tetrakis‐DBA 8 a bearing tert‐butyl groups revealed a remarkable bathochromic shift of the absorption cut‐off (λ_cutoff) compared with those of previously reported graphyne fragments due to extended π‐conjugation. Moreover, in the two‐photon absorption spectrum, 8 a showed a large cross‐section for a pure hydrocarbon because of the planar para‐phenylene‐ethynylene conjugation pathways. Hexakis(arylethynyl)‐DBAs 9 c – e and 9 g and tetrakis‐DBA 8 b bearing electron‐withdrawing groups aggregated in chloroform solutions. Comparison between the free energies of 9 e and 8 b bearing the same substituents revealed the more favorable association of the latter due to stronger π–π interactions between the extended π‐cores. Polarized optical microscopy observations, DSC, and XRD measurements showed that 8 b and 9 e with branched alkyl ester groups displayed columnar rectangular mesophases. By the time‐resolved microwave conductivity method, the columnar rectangular phase of 8 b was shown to exhibit a moderate charge‐carrier mobility of 0.12 cm² V^?1 s^?1. These results indicate that large graphyne fragments can serve as good organic semiconductors.     

Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

Charge rearrangement and screening in a quantum point contact

Compressibility measurements are performed on a quantum point contact (QPC). Screening due to mobile charges in the QPC is measured quantitatively, using a second point contact. These measurements are performed from pinch-off through the opening of the first few modes in the QPC. While the measured signal closely matches a Thomas-Fermi-Poisson prediction, deviations from the classical behavior are apparent near the openings of the different modes. Density functional calculations attribute the deviations to a combination of a diverging density of states at the opening of each one-dimensional mode and exchange interaction, which is strongest for the first mode.     

High pressure studies using two-stage diamond micro-anvils grown by chemical vapor deposition

Ultra-high static pressures have been achieved in the laboratory using a two-stage micro-ball nanodiamond anvils as well as a two-stage micro-paired diamond anvils machined using a focused ion-beam system. The two-stage diamond anvils’ designs implemented thus far suffer from a limitation of one diamond anvil sliding past another anvil at extreme conditions. We describe a new method of fabricating two-stage diamond micro-anvils using a tungsten mask on a standard diamond anvil followed by microwave plasma chemical vapor deposition (CVD) homoepitaxial diamond growth. A prototype two-stage diamond anvil with 300?µm culet and with a CVD diamond second stage of 50?µm in diameter was fabricated. We have carried out preliminary high pressure X-ray diffraction studies on a sample of rare-earth metal lutetium sample with a copper pressure standard to 86?GPa. The micro-anvil grown by CVD remained intact during indentation of gasket as well as on decompression from the highest pressure of 86?GPa.     

Supercapacitive Swing Adsorption of Carbon Dioxide

An electrical effect, the supercapacitive swing adsorption (SSA) effect is reported, which allows for reversible adsorption and desorption of carbon dioxide by capacitive charge and discharge of electrically conducting porous carbon materials. The SSA effect can be observed when an electrically conducting, nanoporous carbon material is brought into contact with carbon dioxide gas and an aqueous electrolyte. Charging the supercapacitor electrodes initiates the spontaneous organization of electrolyte ions into an electric double layer at the surface of each porous electrode. The presence of this double layer leads to reversible, selective uptake and release of the CO₂ as the supercapacitor is charged and discharged.     

Trinuclear Gold Clusters Supported by Cyclic (alkyl)(amino)carbene Ligands: Mimics for Gold Heterogeneous Catalysts

The synthesis of air‐ and moisture‐stable trinuclear mixed‐valence gold(I)/gold(0) clusters is described. They promote the catalytic carbonylation of amines under relatively mild conditions. The synthetic route leading to the trinuclear clusters involves a simple ligand exchange from the readily available μ³‐oxo‐[(Ph₃PAu)₃O]⁺ complex. This synthetic method paves the way for the preparation of a variety of mixed‐valence gold(I)/gold(0) polynuclear clusters. Moreover, the well‐defined nature of the complexes demonstrates that the catalytic process involves a rare example of a definite change of oxidation state of gold from Au⁰₂Au^I to Au^I₃.     

Telluride Misfit Layer Compounds: [(PbTe)1.17]m(TiTe2)n

Telluride misfit layer compounds are reported for the first time. These compounds were synthesized using a novel approach of structurally designing a precursor that would form the desired product upon low‐temperature annealing, which allows the synthesis of kinetically stable products that do not appear on the equilibrium phase diagram. Four new compounds of the [(PbTe)_1.17]_m(TiTe₂)_n family are reported, and their structures were examined by a variety of X‐ray diffraction techniques.