Etching Characteristics and Mechanisms of Mo and Al2O3 Thin Films in O2/Cl2/Ar Inductively Coupled Plasmas: Effect of Gas Mixing Ratios

An investigation of etching behaviors for Mo and Al₂O₃ thin films in O₂/Cl₂/Ar inductively coupled plasmas at constant gas pressure (6 mTorr), input power (700 W) and bias power (200 W) was carried out. It was found that an increase in Ar mixing ratio for Cl₂/Ar plasma results in non-monotonic etching rates with the maximums of 160 nm/min at 60 % Ar for Mo and 27 nm/min at 20 % Ar for Al₂O₃. The addition of O₂ in the Cl₂/Ar plasma causes the non-monotonic Mo etching rate (max. 320 nm/min at 40–45 % O₂) while the Al₂O₃ etching rate decreases monotonically. The model-based analysis of etching kinetics allows one to relate the non-monotonic etching rates in Cl₂/Ar plasma to the change in the etching regime from the ion-flux-limited mode (at low Ar mixing ratios) to the neutral-flux-limited mode (for high Ar mixing ratios). In the Cl₂/O₂/Ar plasma, the non-monotonic Mo etching rate is probably due to the change in reaction probability.     

Dewatering of cellulose nanofibrils using ultrasound

Although cellulose nanomaterials have promising properties and performance in a wide application space, one hinderance to their wide scale industrial application has been associated with their economics of dewatering and drying and the ability to redisperse them back into suspension without introducing agglomerates or lose of yield. The present work investigates the dewatering of aqueous suspensions of cellulose nanofibrils (CNFs) using ultrasound as a potentially low-cost, non-thermal, and scalable alternative to traditional heat-based drying methods such as spray drying. Specifically, we use vibrating mesh transducers to develop a direct-contact mode ultrasonic dewatering platform to remove water from CNF suspensions in a continuous manner. We demonstrate that the degree of dewatering is modulated by the number of transducers, their spatial configuration, and the flow rate of the CNF suspension. Water removal of up to 72 wt.% is achieved, corresponding to a final CNF concentration of 11 wt.% in 30 min using a two-transducer configuration. To evaluate the redispersibility of the dewatered CNF material, we use a microscopic analysis to quantify the morphology of the redispersed CNF suspension. By developing a custom software pipeline to automate image analysis, we compare the histograms of the dimensions of the redispersed dewatered fibrils with the original CNF samples and observe no significant difference, suggesting that no agglomeration is induced due to ultrasonic dewatering. We also perform SEM analysis to evaluate the nanoscale morphology of these fibrils showing a width range of 20 nm–4 um. We estimate that this ultrasound dewatering technique is also energy-efficient, consuming up to 36% less energy than the enthalpy of evaporation per kilogram of water. Together with the inexpensive cost of transducers (<?$1), the potential for scaling up in parallel flow configurations, and excellent redispersion of the dewatered CNFs, our work offers a proof-of-concept of a sustainable CNF dewatering system, that addresses the shortcomings of existing techniques.

     

Thermal behaviors and kinetic analysis of two natural kaolinite samples selected from Qingshuihe region in Inner Mongolia in China

Journal of Thermal Analysis and Calorimetry - The thermal characteristic behaviors of two kaolinite samples selected from Qingshuihe region in Inner Mongolia in China were studied through...     

Magnetic interactions in the geometrically frustrated triangular lattice antiferromagnet CuFeO2

The spin-wave excitations of the geometrically frustrated triangular lattice antiferromagnet CuFeO2 have been measured using high resolution inelastic neutron scattering. Antiferromagnetic interactions up to third nearest neighbors in the ab plane (J1, J2, J3, with J{2}/J{1} approximately 0.44 and J{3}/J{1} approximately 0.57), as well as out-of-plane coupling (J{z}, with J{z}/J{1} approximately 0.29) are required to describe the spin-wave dispersion relations, indicating a three-dimensional character of the magnetic interactions. Two energy dips in the spin-wave dispersion occur at the incommensurate wave vectors associated with multiferroic phase and can be interpreted as dynamic precursors to the magnetoelectric behavior in this system.     

Molecular theory of physical aging in polymer glasses

A molecular level theory for the physical aging of polymer glasses is proposed. The nonequilibrium time evolution of the amplitude of long wavelength density fluctuations, and its influence on activated barrier hopping, plays an essential role. The theory predicts temperature-dependent apparent power-law aging of the segmental relaxation time and logarithmic aging of thermodynamiclike properties, in good accord with experiments. A physical origin for the quantitative nonuniversal aspects based on the amplitude of quenched density fluctuations is suggested.     

Fabrication of a solution-processed thin-film transistor using zinc oxide nanoparticles and zinc acetate

We have fabricated a solution-processed ZnO thin-film transistor without vacuum deposition. ZnO nanoparticles were prepared by the polyol method from zinc acetate, polyvinyl pyrrolidone, and diethyleneglycol. The solution-processable semiconductor ink was prepared by dispersing the synthesized ZnO in a solvent. Inverted stagger type thin-film transistors were fabricated by spin casting the ZnO ink on the heavily doped Si wafer with 200 nm thick SiO₂, followed by evaporation of Cr/Au source and drain electrodes. After the drying and heat treatment at 600 C, a relatively dense ZnO film was obtained. The film characteristics were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to obtain the electrical properties of the solution-derived transistor, the on–off ratio, threshold voltage, and mobility were measured.     

Effective changes in cellulose cell walls,gas permeability and sound absorption capability of Cocos nucifera (palmwood) by steam explosion

Steam explosion is a useful method to soften and dimensionally stabilizing wood. A significant increase in air permeability and sound absorption capability of steam-exploded palmwood compared to untreated palmwood is observed due to changes in cell wall. Cell wall’s changes are characterized by instrumental techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscope and gas permeability by capillary flow porometry and sound absorption coefficient by two-microphone transfer function method. The average increase in air permeability (259.3%) and sound absorption coefficient (52.33% at frequency range of 250–6400 Hz) of steam-exploded samples is higher than that of untreated samples. Color of steam-exploded woods become black due to chemical reactions in cell wall during steam explosion. The color change, air permeability and sound absorption coefficient of wood are correlated with the findings. These results suggest that low-pressure steam explosion could be considered as an effective technique for improving the air permeability and sound absorption capability of palmwood in the longitudinal direction. This approach could be useful to manufacture sound absorption board to control the acoustical housing environment.