Allyl complexes of dicyclopentadienyl-niobium(III) and -tantalum(III)

The synthesis and the properties of the complexes Cp₂TaCl₂, Cp₂M(allyl), Cp₂M(1-methylallyl) and Cp₂M(2-methylallyl) with M  Nb, Ta are described. The complex Cp₂TaCl₂ has one unpaired electron per tantalum atom, while the allyl complexes are diamagnetic. The IR and PMR spectra indicate that the allyl group is π-bonded to the metal. The mass spectra of the complexes are discussed; the thermal stability of the Cp₂Nb- and Cp₂Ta-(allyl) complexes was investigated by differential thermal analysis. The properties of the niobium and tantalum complexes are compared with those of the corresponding titanium complexes.     

Hard-soft acid-base interactions of silylenes and germylenes

A detailed investigation of the electrophilic and nucleophilic character of singlet silylenes and germylenes, divalent compounds of silicon and germanium, respectively, substituted by first- and second-row elements is presented. In a first part, the Lewis acid properties of these compounds were studied through their complexation reaction with the Lewis bases NH3, PH3, and AsH3. The results indicate that this complexation is most favorable with the hardest base NH3, classifying these compounds as hard Lewis acids. This is confirmed by the linear correlation between the interaction energies and the value of the electrostatic potential, used as an approximation to the local hardness, near the empty p orbital of these compounds, indicating a charge-controlled interaction in the complex. Also the electrophilicity index, proposed by Parr et al., computed both at the global and the local level, correlates linearly with the complexation energies of the compounds with NH3. The Lewis base character of these silylenes has been investigated, through their interaction with the acids BH3 and AlH3. Also in this case, the electrostatic potential can be used to probe the reactivity of the compounds. It will finally be demonstrated that an increasing stability of the silylenes and germylenes is accompanied by an increase in their nucleophilicity and a decrease of the electrophilicity.     

Is styrene planar in liquid phases?

The proton NMR spectra of two (13)C-labeled isotopomers of styrene dissolved in two liquid crystalline solvents have been obtained and analyzed to yield four sets each of 24 dipolar couplings. These couplings were then used to investigate the structure of the ring and the ene fragments of the molecule, and the position of the maximum, phi(0), in the ring-ene bond rotational probability distribution. To do this, the effect on the dipolar couplings of small-amplitude vibrational motion was taken into account using vibrational wave functions calculated by molecular orbital and density functional methods. It is concluded that the NMR data are consistent with the ring fragment, averaged over the ring-ene rotation, planar, while the ene fragment is not. The value of phi(0) is found to be 18.0 degrees +/-0.2 degrees for the two solutions, compared with a value of 27 degrees calculated by the molecular method MP2/6-31G(*).     

5-vinylisoxazole

Cycloaddition of fulminic acid to 1-butyn-3-ol gave a mixture of 5-α-hydroxyethylisoxazole (I) and 4-α-hydroxyethylisoxazole (II) in the ratio 9:1. By the dehydration of 1, 5-vinylisoxazole (III) was obtained. Compound III has also been prepared by cyclization of 4-penten-2-ynal as well as its diethylacetal with hydroxylamine hydrochloride; in both instances no isomers have been obtained. Compound III spontaneously polymerizes even at room temperature yielding a polymer still containing isoxazole rings.     

Determination of betamethasone and triamcinolone acetonide by GC-NCI-MS in excreta of treated animals and development of a fast oxidation procedure for derivatisation of corticosteroids.

The use of corticosteroids in combination with other hormonal substances has long been known to result in increased mass gain with bovines. Practice has demonstrated, however, that even the single use of a glucocorticoid may result in growth promoting effects. In addition to the popular dexamethasone, more recently other corticosteroids have also been misused for fattening purposes. The first part of this study deals with the detection of two of them, namely betamethasone and triamcinolone acetonide. Betamethasone was administered orally to a cow at a dose of 50 mg d-1 for 5 d, then later the same cow was injected intramuscularly with a dose of 50 mg of betamethasone dipropionate. Excretion in urine and faeces was followed with both HPLC-enzyme immunoassay and a previously described method based on negative chemical ionization mass spectrometry (NCI-MS) after oxidation. For the triamcinolone acetonide study a cow was treated with 50 mg d-1 of the drug during a 7 d period. Excretion in faeces was followed with GC-NCI-MS. As triamcinolone acetonide is resistant to the previously described oxidation procedure, however, a hydrolysis step had to be introduced prior to oxidation. In addition to this specific modification necessary for triamcinolone acetonide, in a subsequent part of this study the original oxidation procedure with pyridinium chlorochromate was re-investigated especially to shorten the procedure. With the introduction of potassium dichromate the reaction time could be decreased from 3 h to 10 min.     

Synthesis of 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines

The reaction of 1,2-diaminobenzenes with substituted 1,2-dibenzoyl-1,2-dibromoethanes constitutes a convenient synthetic route to the hitherto 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines. Structures of all products were elucidated by ir, ¹H and ¹³C-nmr, mass spectra data. X-Ray crystallography data confirm assigned structures.     

Determination of sulphur in fly ash by instrumental proton activation analysis

A method for the determination of sulphur in fly ash by instrumental proton activation analysis using the³⁴S/p,n/^34mCl reaction was developed. The 2128.5 keV and 3305.0 keV -rays of^34mCl /t=32.0 min/ were measured on a Ge/Li/ -spectrometer, shielded with a lead absorber to attenuate low energy -rays. Irradiation and measuring conditions were optimized. The detection limit for instrumental analysis is 0.3 to 1 mg g^–1 and the standard deviation is cca. 4% for a typical sample.     

516—Synthetic and biological membranes

Biological cell membranes are compared to artificially produced permselective membranes. In spite of the difference in their thickness and electric resistance it is shown that they are similar in many important aspects, and the behaviour of synthetic membranes can explain very many points in the behaviour of cell membranes, especially axons. It is stressed that it is seldom necessary to assume unproven channels in biological membranes which are specific in the transport of a single ion species. Most of the phenomena of selectivity, opening and closing of such membranes can be explained by the influence of pH on membrane sites, by their poisoning with higly charged and/or large counter-ions. The borderline between two oppositely charged regions of a mosaic membrane opens up because it can be traversed by both positive and negative ions and permselectively is lost. Bipolar membranes rectify the current. Amphoteric membranes undergo very complex changes in conducting properties and permselectively with pH, especially when allowance is made for the weakly dissociated sites contained within these membranes. It is suggested that black lipid membranes made in the laboratory could be used to elucidate new points of similarity if they were used under similar conditions to our technical membranes.     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.