水相中金属铜表面生成亚铜—邻菲罗啉配合物的反应

本文研究了零价铜在邻菲罗啉水溶液中的反应。当溶液敞露于空气并存在有机阴离子Ｘ－时，例如苯甲酸盐（Ｂｚ）、对甲基苯磺酸盐（Ｔｓ）等，铜的表面生成了致密的反应产物的薄层，经ＩＲ、ＵＶ／ＶＩＳ、ＭＳ和元素分析证明了该薄层为相当纯的亚铜的邻菲罗啉配位化合物，结构为［Ｃｕ（ｐｈｅｎ）２］＋Ｘ－。在乙醇／甲苯混合溶剂中得到了表面反应产物的晶体［Ｃｕ（ｐｈｅｎ）２］（ＣＨ３Ｃ４Ｈ６ＳＯ３）Ｃ２Ｈ５ＯＨ，并用Ｘ－ｒａｙ测得了结构。本工作表明溶液中的ＣｕⅡ离子抑制Ｃｕ０氧化成ＣｕⅠ而影响反应层的形成，同时又促进ＣｕⅠ氧化成ＣｕⅡ的过程     

红外光谱法观察二茂镧系氯化物与氧及水蒸气的反应

用实时红外光谱法在特制的收池中分别观察了一些二茂镧系氯化物Ｃｐ２ＬｎＣｌ（Ｃｐ＝Ｃ５Ｈ５，Ｌｎ＝Ｈｏ，Ｇｄ，Ｌｕ）和Ｃｐ＇Ｌｕ（Ｃｐ＝Ｃ５Ｈ４ＣＨ２ＯＣＨ３）与干燥氧气及水蒸气的反应，结果证实这些二茂镧系配合物在室温干燥氧气氛中很稳定，但在水蒸气中很快水蒸气的反应，结果证实这些二茂镧系配合物在室温干燥氧气氛中很稳定，但在水蒸气中很快水解。从水解反应的最初始阶段和较后期采得的红外光谱提示可能存在...     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine

A bio-mimic bulk acoustic wave (BAW) sensor was fabricated by coating the caffeine (CAF) template molecular imprinting polymer (MIP). This sensor exhibited high selectivity and a sensitive mass response to CAF. The response range of the sensor was between 5.0 x 10(-9) and 1.0 x 10(-4) M with a detection limit of 5.0 x 10(-9) M at pH 8.0. Recoveries were 96.1-105.6%. Influencing factors were investigated in detail and optimized. When employed to detect real samples, the proposed method proved to be a convenient method with the advantages of high sensitivity, good selectivity and ease of handling.     

光学分析方法在DNA检测中的应用

介绍了用于DNA检测的各种光学分析方法及其原理,主要包括荧光法、化学发光法、光纤传感法、比色法、表面等离子共振法以及其他光学衍生方法。     

Chemical analysis and cellular imaging with quantum dots

Quantum dots are tiny light-emitting particles on the nanometer scale. They are emerging as a new class of biological labels with properties and applications that are not available with traditional organic dyes and fluorescent proteins. Their novel properties such as improved brightness, resistance against photobleaching, and multicolor light emission, have opened new possibilities for ultrasensitive chemical analysis and cellular imaging. In this Research Highlight article , we discuss the unique optical properties of semiconductor quantum dots, surface chemistry and bioconjugation, current applications in bioanalytical chemistry and cell biology, and future research directions.     

A Multinomial Approximation Approach for the Finite Time Survival Probability Under the Markov-modulated Risk Model

In this paper, we consider the problem of computing different types of finite time survival probabilities for a Markov-Modulated risk model and a Markov-Modulated risk model with reinsurance, both with varying premium rates. We use the multinomial approximation scheme to derive an efficient recursive algorithm to compute finite time survival probabilities and finite time draw-down survival probabilities. Numerical results show that by comparing with MCMC approximation, discretize approximation and diffusion approximation methods, the proposed scheme performs accurate results in all the considered cases and with better computation efficiency.

     

Electropolymerized m-phenylenediamine as a means to immobilize active protein on thickness-shear-mode quartz crystal

Electropolymerized m-phenylenediamine was used as an active coating for immobilizing urease and lectin on a gold-plated thickness-shear-mode (TSM) crystal. To enhance effectiveness of immobilization. a bilayer polymer film composed of polyaniline and poly-m-phenylenediamine was proposed. Compared with single poly-m-phenylenediamine film, the bilayer polymer film gave better results in terms of immobilizing capacity, stability and reproductivity. On this bilayer-film-coated TSM quartz crystal, the amount of immobilized lectin was estimated about 1.8 mug/cm(2). Detection of purified human erythrocytes is demonstrated as an example of potential application of this lectin-modified TSM biosensor in clinic.     

Mimosa-Inspired High-Sensitive and Multi-Responsive Starch Actuators

Artificial intelligent actuators are extensively explored for emerging applications such as soft robots, human-machine interfaces, and biomedical devices. However, intelligent actuating systems based on synthesized polymers suffer from challenges in renewability, sustainability, and safety, while natural polymer-based actuators show limited capabilities and performances due to the presence of abundant hydrogen-bond lockers. Here this study reports a new hydrogen bond-mediated strategy to develop mimosa-inspired starch actuators (SA). By harnessing the unique features of gelatinization and abundant hydrogen bonds, these SA enable high-sensitivity and multi-responsive actuation in various scenarios. The non-gelatinized SA can be irreversibly programmed into diverse shapes, such as artificial flowers, bowl shapes, and helix structures, using near-infrared light. Furthermore, the gelatinized SA exhibit reversibly multi-responsive actuation when exposed to low humidity (10.2%), low temperature (37 °C), or low-energy light (0.42 W cm⁻²). More importantly, the SA demonstrate robust applications in smart living, including artificial mimosa, intelligent lampshade, and morphing food. By overcoming the hydrogen-bond lockers inherent in natural polymers, SA open new avenues for next-generation recyclable materials and actuators, bringing them closer to practical applications.     

基于高密度子网格光线追迹的三维发射层析重建算法

三维(three- dimensional,3D) 发射层析技术(emission computerized tomography,ECT) 是一种简单、高效且准确的燃 烧场3D成像与检测技术,其中权重矩阵的计算 精度决定了层析重建的精度和质量。本文研究了一种基于高密度子网格光线追迹的权重矩阵 计算方法, 将被测区域划分为密度更高的子网格,并根据相机成像模型实现光线追迹,以确定离散网格 对投影像素 的权重因子。数值模拟和燃烧火焰重建实验表明该算法具有较高的精度和计算效率。该研究 对于3D发射层析技术的实用化具有重要的理论意义。