Microstructural evolution of decagonal quasicrystal in the undercooled Al72Ni12Co16 alloy melts

The microstructure evolution of decagonal quasicrystals in Al₇₂Ni₁₂Co₁₆ alloy was investigated by the electromagnetic melting and cyclic superheating method. Single-phase decagonal quasicrystals have been obtained when the undercoolings were larger than 60 K. The decagonal quasicrystals formed at various undercoolings show different microstructural morphologies. Furthermore, grain refinement was found near the undercooling of 120 K. Based on current thermodynamic and dendrite growth theories, a dimensionless superheating parameter was adopted to explain the effect of processing conditions on the microstructure of Al₇₂Ni₁₂Co₁₆ alloy. The result indicate that the fine equiaxied microstructure of decagonal quasicrystal (D-phase) formed near on undercooling of 120 K originates from the break-up of dendrites.     

Transformations for nonideal uniform circular arrays operating in correlated signal environments

The Davies transformation is a method to transform the steering vector of a uniform circular array (UCA) to one with Vandermonde form. As such, it allows techniques such as spatial smoothing for direction-of-arrival (DOA) estimation in a correlated signal environment, developed originally for uniform linear arrays, to be applied to UCAs. However, the Davies transformation can be highly sensitive to perturbations of the underlying array model. This paper presents a method for deriving a more robust transformation using optimization techniques. The effectiveness of the method is illustrated through a number of DOA estimation examples.     

基于预前控制异步电机直接转矩控制方案的研究

在传统异步电动机直接转矩控制方案中，由于负载的变化规律不可预测，因此其常会带来较大的开关频率的变化，为此提出了一种基于预前控制的异步电动机直接转矩控制的方法。该方法依据前一个周期的磁链和转矩误差，对下一个开关周期所应施加到异步电动机的定子电压矢量进行预测，然后借助空间矢量PWM的方法，合成此开关电压矢量。样机实验结果表明，该方案不但能维持逆变器的开关频率基本恒定，而且还具有比传统直接转矩控制更为优良的动静态特性。     

Some results on fractionaln-factor-critical graphs

A simple graphG is said to be fractionaln-factor-critical if after deleting anyn vertices the remaining subgraph still has a fractional perfect matching. For fractionaln-factor-criticality, in this paper, one necessary and sufficient condition, and three sufficient conditions related to maximum matching, complete closure are given.     

Characterization of ultrashort optical pulses with third-harmonic-generation based triple autocorrelation

We present a method to obtain complete information of femtosecond pulses. By measuring triple-optical autocorrelation directly with third-harmonic generation, without spectral information, a temporal pulse shape can be obtained by analytical calculation without direction-of-time ambiguity. Combining the resulting optical pulse shape with its corresponding optical spectrum, the exact phase and color variations in time can all be recovered with a Gerchberg-Saxton algorithm through an iterative calculation with an O(n) complexity.     

Impact of temperature cycle profile on fatigue life of solder joints

In this paper the influence of the temperature cycle time history profile on the fatigue life of ball grid array (BGA) solder joints is studied. Temperature time history in a Pentium processor laptop computer was measured for a three-month period by means of thermocouples placed inside the computer. In addition, Pentium BGA packages were subjected to industry standard temperature cycles and also to in-situ measured temperature cycle profiles. Inelastic strain accumulation in each solder joint during thermal cycling was measured by high sensitivity Moire interferometry technique. Results indicate that fatigue life of the solder joint is not independent of the temperature cycle profile used. Industry standard temperature cycle profile leads to conservative fatigue life observations by underestimating the actual number of cycles to failure.     

A few points on omnidirectional band gaps in one-dimensional photonic crystals

The universal condition for the formation of omnidirectional band gaps (OBG) in photonic crystal (PC) was derived with consideration of permeability of the materials. And it was found that there are four kinds of PCs: one of them has no OBG, and one always possesses OBG. For the other two kinds of PCs, there are OBG for only TM or TE waves respectively. Moreover, in all PCs, the OBG can be broadened by decreasing the refractive index of the ambient medium or/and increasing the contrast between the wave impedances of the component materials of the PC. PACS 42.70.Qs; 71.20.Tx     

Engineering issue study of triple harmonic method for in situ flying height analysis

In situ flying height testing technology is becoming more and more important in slider–disk interaction analysis and manufacturing quality control of disk drives and head-related components. Triple harmonic method is a quite promising choice for in situ flying height analysis, compared with other in situ methods reported up to now. This paper reports results of investigations on engineering issues of applying triple harmonic method for in situ flying height analysis. The paper reports results of analysis on the effects of various testing conditions on flying height testing repeatability and accuracy. Results suggest that working at reasonable high channel density and working on the ratio between third and first harmonics will be an advantage in terms of both flying height testing sensitivity and testing repeatability. Comparing with media thickness effect, the gap-length variation among different heads will be important if it is to study flying height difference among different heads and the testing is at high channel density. Also, it is suggested to work at AC erased track, in order to reduce the non-linearity caused by hard transition.     

Chemical analysis and distribution investigation of trace elements in indium matrix by spark source mass spectrometry

Summary High-purity indium was analysed by spark source mass spectrometry, using electrical and photoplate detection. For the calibration of the differences in elemental sensitivity, a standard sample was prepared in which 10 impurities were determined by graphite furnace atomic absorption spectrometry. In this way accuracies of less than 40% were obtained for relatively homogeneous elements at ppm and sub-ppm level. About 40 elements could be determined with detection limits of 10 to 30 ppb. Two pattern recognition methods, principal component analysis and clustering analysis, were applied to obtain information on trace element distribution, which indicated that a number of elements were strongly spatially correlated in the analysed sample.

---

Chemische Analyse und Verteilungsbestimmung von Spurenelementen in Indium-Matrix durch Funkenquellen-Massenspektrometrie

---

On leave from: Department of Chemistry, Nanjing Normal University, Nanjing, People's Republic of China