Pt/Au/Fe3O4的制备及其电化学性能

以制得的纳米Fe₃O₄颗粒作为载体,用还原法将还原出的Au与Pt分别负载到Fe₃O₄颗粒表面,制得纳米Pt/Au/Fe₃O₄复合材料。对Pt/Au/Fe₃O₄进行紫外可见光吸收光谱、透射电子显微镜、X射线衍射及光电子能谱等物理表征,结果表明,Au与Pt均匀地沉积到了Fe₃O₄纳米颗粒表面。对纳米Pt/Au/Fe₃O₄复合材料进行循环伏安扫描,当H₂PtCl₆的加入量达到8 mL时,Pt/Au/Fe₃O₄催化性能最佳;正扫电流峰i_p与扫描速率的平方根v^1/2线性相关,Pt/Au/Fe₃O₄催化氧化甲醇的过程受扩散控制;对催化剂进行201次循环伏安扫描,催化剂仍然能保持较好的催化性能且稳定性良好。因此,所合成催化剂Pt/Au/Fe₃O₄是一种具有良好化学稳定性的阳极催化剂材料。     

Influence of clay on the morphology and phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends

The effect of clay on the morphology and phase-separation behavior of poly(methyl methacrylate)/poly(styreneco-acrylonitrile)(PMMA/SAN) blends and the variation of clay dispersion have been investigated. With the evolution of phase separation in PMMA/SAN, most of the clays are first located at the boundaries between PMMA and SAN, and then gradually move to the PMMA-rich domain, owing to the affinity of clay to PMMA. The introduction of clay causes the increase of binodal and spinodal temperatures of PMMA/SAN and enlarges their metastable region, indicating the phase stabilizing effect of clay on the matrix. But the influence of clay on the cloud points obviously depends on the composition of PMMA/SAN. The selective adsorption of PMMA on the clay results in the difference between the composition of surface layer and that of polymer matrix. Hence, the clay plays the role of an agent changing the conditions of phase structure formation.     

Synthesis and properties of new materials with banana-shaped achiral cores and chiral end groups

New chiral bent-core mesogens, derivatives of 1,3-phenylene bis[4-(alkanyloxyphenyliminomethyl)benzoate], were synthesized with variation of a substituent (X=F, Cl); their antiferroelectric properties are described. The mesomorphic and switching properties were characterized by differential scanning calorimetry, polarizing optical microscopy, triangular wave method, and X-ray diffractometry in the small and wide angle regions. The presence of chiral tails at the terminals of side wings in the bent-core molecules induced a decrease in transition temperature and formation of the switchable SmC* phase in the melt. In addition, the introduction of a lateral halogen substituent in the Schiff's base moiety prevented the regular stacking of the molecules, resulting in the formation of very complex optical textures. The smectic phase with F-substituted PBFDOB and Cl-substituted PBCDOB showed layer spacings of 39 and 38.5?Å, respectively, corresponding to the end-to-end distance of molecules with a bent conformation. Significantly, the smectic phases of PBFDOB and PBCDOB exhibited a period of 179.5 and 131?Å, respectively, compatible with a helical structure with periodicity about 4.6 and 3.4 times the layer spacings.     

Ferroelectric smectic meso-phase formed by banana-shaped achiral liquid crystals

A new banana-shaped achiral molecule, 1,3-phenylene bis[4-(3-chloro-4-n-octyloxyphenyliminomethyl)benzoate] (PBCOB) has been synthesized, and its ferroelectric properties and homeotropic alignment investigated. The presence of a lateral chloro-substituent in the Schiff 's base moiety prevents the regular stacking of molecules and results in lowering the transition temperature and the degree of crystallinity of the switchable banana phase. Their smectic mesophases, including a switchable banana phase B₇, were characterized by differential scanning calorimetry, X-ray scattering and polarizing optical microscopy. Both the left- and right-handed helical domains are spontaneously formed upon cooling from the isotropic liquid to the switchable banana phase B₇. By X-ray study, the smectic phases showed a layer spacing of 38.1 Å, compatible with the end-to-end distance of the molecule with a bent conformation. Significantly, the smectic B7 phase exhibited a periodicity of 292 Å that corresponds to a helical structure with periodicity about 7.5 times 38.1 Å. The spontaneous polarization for PBCOB is about 50 nCcm^-2 and shows a temperature dependence. The ferroelectric lyomesophase of PBCOB showed a ferroelectric electro-optical switching range extending more than 50°C, switchable at room temperature.     

Ferroelectric liquid crystals from banana-shaped achiral molecules with vinyl end groups

Banana-shaped achiral compounds, the 1,3-phenylene bis[4-(alkenyloxyphenyliminomethyl)benzoate]s, were synthesized with varying length of the alkenyl group; their ferroelectric properties are described. The smectic mesophases, including a switchable chiral smectic C (SmC*) phase, were characterized by differential scanning calorimetry, polarizing optical microscopy and the triangular wave method. The presence of vinyl groups at the ends of the linear side-wings in the banana-shaped achiral molecules, containing a Schiff's base mesogen, induced a decrease in melting temperature and formation of the switchable SmC* phase in the melt. The compound having the octenyloxy group exhibited a spontaneous polarization of 120 nC cm^?2 on reversal of an applied electric field.     

Crystallization of calcium carbonate controlled by Pluronic P123 in room-temperature ionic liquid

The crystallization of calcium carbonate (CaCO₃) controlled by Pluronic P123 in a room-temperature ionic liquid, ethylamine nitrate (EAN), was investigated. The CaCO₃ aggregates were obtained by rapid mixing of ammonium carbonate ((NH₄)₂CO₃) and calcium chloride (CaCl₂). Cubic calcite, spherical vaterite, and bagel-like vaterite were obtained easily by changing P123 concentration and reaction temperature. The morphologies of the as-prepared CaCO₃ aggregates were investigated by transmission electron microscopy and scanning electronic microscopy. The phase change of the obtained crystals was confirmed by X-ray diffraction and Fourier transform infrared spectroscopy. It was shown that higher P123 concentration and higher reaction temperature favor the formation of vaterite in EAN. Unusual bagel-like vaterite was first obtained at 60 °C in the presence of 5 g/L P123 in EAN. Mineralization of CaCO₃ regulated by P123 in EAN is a simple, novel, and environment-friendly strategy for vaterite synthesis.     

Recombinant Expression and Characterization of an Organic-Solvent-Tolerant α-Amylase from Exiguobacterium sp. DAU5

The enzyme from halophilic microorganisms often has unique properties such as organic-solvent-tolerance. In this study, a novel organic-solvent-tolerant α-amylase gene was cloned from the mild halophile Exiguobacterium sp. DAU5. The open reading frame (ORF) of the enzyme consisted of 1,545 bp and encoded 514 amino acids, the primary sequence revealed that it belongs to the glycoside hydrolase (GH) family 13. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed an AmyH monomer of 57 kDa. The enzyme exhibited maximal activity at 40 °C in pH?8.5 glycine–NaOH buffer, and the activity was strongly inhibited by Zn²⁺, Cu²⁺, and Fe²⁺. The α-amylase AmyH exhibited high hydrolysis activity toward soluble starch, and the major hydrolysis products were maltose, maltotriose, and maltopentaose; the AmyH could not efficiently hydrolyze oligosaccharides smaller than maltoheptaose, nor could it act on the β-1,4 or α-1,6 glucosidic bonds in xylan or pullulan, respectively. In addition, the α-amylase exhibited better tolerance to organic solvents, as it was stable in the presence of dimethylsulfoxide (DMSO), methanol, ethanol, and acetone. Base on all of these results, the enzyme could be useful for practical application in the bakery industry and in biotechnological processes that occur in the presence of organic solvents.     

Curcumin Inhibits the Sortase A Activity of the Streptococcus mutans UA159

Streptococcus mutans (S. mutans) forms part of the commensal microflora and is deemed to be the major pathogen responsible for the generation of dental caries. The enzyme, sortase A enzyme, modulates the surface properties and cariogenicity of S. mutans. Curcumin has been reported to be an inhibitor of Staphylococcus aureus sortase A. In this study, inhibition of a purified S. mutans UA159 sortase A by curcumin was evaluated. Curcumin exerted strong inhibitory activity with a half maximal inhibitory concentration (IC₅₀) of 10.2?±?0.7 μM which was lower than the minimum inhibitory concentration of 175 μM and the minimum bactericidal concentration of 350 μM. These results indicated that curcumin is a S. mutans UA159 sortase A inhibitor and therefore represents as a promising anticaries agent.     

Biological Removal of Phosphate at Low Concentrations Using Recombinant Escherichia coli Expressing Phosphate-Binding Protein in Periplasmic Space

During wastewater treatment, phosphate removal is an important and challenging process; thus, diverse technologies, including those derived from biological means, have been devised for efficient phosphate removal. Although conventional biological methods are effective in decreasing wastewater phosphate levels to ~1 mg/L, long periods of microbial adaptation are required for effective phosphate removal, and the removal efficiency of these methods is relatively poor at lower phosphate concentrations. In the present work, we constructed a recombinant Escherichia coli with periplasmic-expressed phosphate-binding protein (PBP) and investigated its biological removal ability for low phosphate levels. We found that the PBP-expressing recombinant E. coli cells showed efficient (> 94 %) removal of phosphate at low concentrations (0.2–1.0 mg/L) in a treated cell mass-dependent manner. Collectively, we propose that our PBP-expressing recombinant whole-cell system could be successfully used during wastewater treatment for the biological removal of low concentrations of phosphate.     

Glucose Oxidase/Cellulose–Carbon Nanotube Composite Paper as a Biocompatible Bioelectrode for Biofuel Cells

Biofuel cells are devices for generating electrical energy directly from chemical energy of renewable biomass using biocatalysts such as enzymes. Efficient electrical communication between redox enzymes and electrodes is essential for enzymatic biofuel cells. Carbon nanotubes (CNTs) have been recognized as ideal electrode materials because of their high electrical conductivity, large surface area, and inertness. Electrodes consisting entirely of CNTs, which are known as CNT paper, have high surface areas but are typically weak in mechanical strength. In this study, cellulose (CL)–CNT composite paper was fabricated as electrodes for enzymatic biofuel cells. This composite electrode was prepared by vacuum filtration of CNTs followed by reconstitution of cellulose dissolved in ionic liquid, 1-ethyl-3-methylimidazolium acetate. Glucose oxidase (GOx), which is a redox enzyme capable of oxidizing glucose as a renewable fuel using oxygen, was immobilized on the CL–CNT composite paper. Cyclic voltammograms revealed that the GOx/CL–CNT paper electrode showed a pair of well-defined peaks, which agreed well with that of FAD/FADH_2, the redox center of GOx. This result clearly shows that the direct electron transfer (DET) between the GOx and the composite electrode was achieved. However, this DET was dependent on the type of CNTs. It was also found that the GOx immobilized on the composite electrode retained catalytic activity for the oxidation of glucose.