Instabilities of micellar systems under homogeneous and non-homogeneous flow conditions

The rheological behavior of a cetylpyridinium chloride 100 mmol l^–1/sodium salicylate 60 mmol l^–1 aqueous solution was studied in this work under homogeneous (cone and plate) and non-homogeneous flow conditions (vane-bob and capillary rheometers), respectively. Instabilities consistent with non-monotonic flow curves were observed in all cases and the solution exhibited similar behavior under the different flow conditions. Hysteresis and the sigmoidal flow curve suggested as characteristic of systems that show constitutive instabilities were observed when running cycles of increasing and decreasing stress or shear rate, respectively. This information, together with a detailed determination of steady states at shear stresses close to the onset of the instabilities, allowed one to show unequivocally that "top and bottom jumping" are the mechanisms to trigger the instabilities in this micellar system. It is shown in addition that there is not a true plateau region in between the "top and bottom jumping". Finally, the flow behavior beyond the upturn seemed to be unstable and was found accompanied by an apparent violation of the no-slip boundary condition.     

AC-coupled front-end for biopotential measurements

AC coupling is essential in biopotential measurements. Electrode offset potentials can be several orders of magnitude larger than the amplitudes of the biological signals of interest, thus limiting the admissible gain of a dc-coupled front end to prevent amplifier saturation. A high-gain input stage needs ac input coupling. This can be achieved by series capacitors, but in order to provide a bias path, grounded resistors are usually included, which degrade the common mode rejection ratio (CMRR). This paper proposes a novel balanced input ac-coupling network that provides a bias path without any connection to ground, thus resulting in a high CMRR. The circuit being passive, it does not limit the differential dc input voltage. Furthermore, differential signals are ac coupled, whereas common-mode voltages are dc coupled, thus allowing the closed-loop control of the dc common mode voltage by means of a driven-right-leg circuit. This makes the circuit compatible with common-mode dc shifting strategies intended for single-supply biopotential amplifiers. The proposed circuit allows the implementation of high-gain biopotential amplifiers with a reduced number of parts, thus resulting in low power consumption. An electrocardiogram amplifier built according to the proposed design achieves a CMRR of 123 dB at 50 Hz.     

Reduction of electromyographic noise in the signal-averaged electrocardiogram by spectral decomposition

This paper proposes a technique to improve the quality of high-resolution electrocardiogram by weighting the coherent average of beats by a function of the energy of the corrupting myoelectric noise, prior to subsequent detection of ventricular late potentials. The results obtained with 20 patients indicate the method requires fewer beats than conventional nonweighted average to achieve the same noise level.     

Dosage individualization of erythropoietin using a profile-dependent support vector regression

The external administration of recombinant human erythropoietin is the chosen treatment for those patients with secondary anemia due to chronic renal failure in periodic hemodialysis. The objective of this paper is to carry out an individualized prediction of the EPO dosage to be administered to those patients. The high cost of this medication, its side-effects and the phenomenon of potential resistance which some individuals suffer all justify the need for a model which is capable of optimizing dosage individualization. A group of 110 patients and several patient factors were used to develop the models. The support vector regressor (SVR) is benchmarked with the classical multilayer perceptron (MLP) and the Autoregressive Conditional Heteroskedasticity (ARCH) model. We introduce a priori knowledge by relaxing or tightening the epsilon-insensitive region and the penalization parameter depending on the time period of the patients' follow-up. The so-called profile-dependent SVR (PD-SVR) improves results of the standard SVR method and the MLP. We perform sensitivity analysis on the MLP and inspect the distribution of the support vectors in the input and feature spaces in order to gain knowledge about the problem.     

Multicolor luminescence patterning by photoactivation of semiconductor nanoparticle films

Indiscriminate adsorption of nanoparticles (NPs) significantly complicates the preparation of mesoscale NP patterns considered as enabling technology for many devices and processes. Instead of selected chemical functionalization of the substrate surface prior to the assembly of nanocolloids, the required optical properties - in our case, high quantum yield luminescence - are imparted to the layer-by-layer assembled films by spatially selected photoactivation. The films are made by sequential adsorption of a positively charged polyelectrolyte and a negatively charged CdSe/CdS aqueous dispersion with an initial quantum yield of 0.5-2%. The photoactivation process takes place in the presence of oxygen and may be accompanied by photoetching. A 50-500-fold increase in the luminescence intensity of CdSe/CdS citrate-stabilized particles (quantum yield 25-45%) after visible light illumination provides excellent pattern contrast. Micron scale luminescence patterns were produced from NPs of various CdSe core diameters with red, yellow, and green emission. It was also demonstrated that different emission colors such as orange and green can be combined in one image by taking advantage of spatially selective photoetching. The presented optical patterning technique significantly simplifies the preparation of luminescence patterns as compared to conventional methods. The high signal-to-noise ratio associated with it is essential for optical devices, information processing, and biophotonics. The most immediate use of this approach is expected in cryptography and cell monitoring.     

Stereocontrolled reactions mediated by a remote sulfoxide group: synthesis of optically pure anti-beta-amino alcohols

[reaction: see text] A one-step synthesis of enantiomerically pure anti-1,2-amino alcohol derivatives has been achieved by reaction of prochiral oxygenated 2-p-tolylsulfinylbenzyl carbanions with N-sulfinylimines bearing the same configuration at sulfur.     

Carbohydrate-derived spiroketals: stereoselective synthesis of di-D-fructose dianhydrides via intramolecular aglycon delivery

[reaction: see text] A one-pot synthesis of C(2)-symmetric di-d-fructose dianhydrides having the 1,6,9,13-tetraoxadispiro [4.2.4.2]tetradecane skeleton has been accomplished via intramolecular aglycon delivery from (6 --> 6) xylylene-tethered fructofuranose precursors. The stereochemical outcome of the glycosylation-spiroketalization process is governed by the geometrical constraints imposed by the rigid tetracyclic structure of the final compound.     

Simultaneous determination of "earthy-musty" odorous haloanisoles and their corresponding halophenols in water samples using solid-phase microextraction coupled to gas chromatography with electron-capture detection

Certain haloanisoles present at trace levels cause a large part of earthy-musty off-flavor problems in drinking water. These potent odorous chemicals come mainly through biomethylation of their corresponding halopenols. To enable the investigation of both families of compounds, a method involving solid-phase microextraction (SPME) was developed and the main parameters governing SPME were optimized. This method allows the simultaneous quantification of haloanisoles and halophenols at levels ranging from 1 to 100 or 250 ng/l, with detection limits of about 0.5 ng/l and could be applied to potable as well as raw surface waters.     

Surface reactions kinetics between nanocrystalline magnetite and uranyl

Magnetite is the most important end member of iron corrosion products under reducing environment, which is the condition expected in a deep geological high level radioactive waste disposal. Nanocrystalline magnetite was synthesized in the laboratory and its physicochemical properties were analyzed in detail. The kinetics of the adsorption of U(VI) and the kinetics of the actinide reduction to a lower oxidation state, in presence of the oxide, were studied by means of batch sorption techniques and X-ray photoelectron spectroscopy (XPS) analysis. The results showed that the uranium sorption and reduction processes on the magnetite surface have very fast kinetics (hours), the reduction process being triggered by sorption. XPS measurements showed that the speciation of uranium at the surface does not show significant changes with time (from 1 day to 3 months), as well as the quantity of uranium detected at the surface. The surface speciation depended on the initial pH of the contact solution. Considering that the Eh of equilibrium between magnetite and the solution, under our experimental conditions, is slightly positive (50-100 mV), the uranium reduction would also be thermodynamically possible within the liquid phase. However, the kinetics of reduction in the liquid occur at a much slower rate which, in turn, has to depend on the attainment of the magnetite/solution equilibrium. The decrease of uranium in solution, observed after the uranyl adsorption stage, and particularly at acidic pH, is most probably due to the precipitation of U(IV) formed in the solution.     

Synthesis of thiadiazole, dithietane, and imine derivatives of the [1,2]dithiolo[1,4]thiazine ring system

We report the synthesis of some new polysulfur-nitrogen heterocyclics by cycloaddition reactions to the thioketo group of readily available tricyclic 1,2-dithiole-3-thiones. Thus treatment of bis[1,2]dithiolo[1,4]thiazine ketothione 1 with diaryl nitrile imines generated from hydrazonoyl chlorides 2a-g gave [1,3,4]thiadiazolylidenyl[1,2]dithiolo[1,4]thiazines 4a-g in high yield. Compounds 4a-f, bearing the same substituents in both aryl groups, were stable but the analogous 4g,h with a p-nitrophenyl group on carbon gave the bis[1,2]dithiolo[1,4]thiazine dione 9, probably by cycloreversion and hydrolysis during chromatography. Treatment of 1, the bis[1,2]dithiolopyrrole ketothione 13, and dithione 12 with ethoxycarbonyl azide 11 gave imines 12 and 15 and bisimine 16, respectively, by an alternative fragmentation of the initial cycloadduct in which the 1,2-dithiole ring is retained. Reaction of 1 with TosMIC gave the imino-1,3-dithietane 17.