Quality-aware cross-layer scheduling for robust video streaming over wireless channels

In the case of video streaming over wireless channels, burst errors may lead to serious video quality degradation. By jointly exploiting the scheduling mechanism on different communication layers, this paper proposes a quality-aware cross-layer scheduling scheme to achieve unequal error control for each Latency-constraint Frame Set (LFS) of a video stream. After a network-layer agent at base station firstly utilizes the network-layer packet scheduling to provide packet-granularity importance classification for the current LFS, a link-layer agent at base station further utilizes the Radio-Link-Unit (RLU) scheduling to implement finer selective retransmission of the current LFS. Under scheduling delay and bandwidth constraints, the proposed scheme can be aware of the application-layer quality and time-varying channel conditions, and hence burst errors can simply be shifted to lower-priority transmission units in the current LFS. Simulation results demonstrate that the proposed scheme has strong robustness against burst errors, and thus improves the overall received quality of the video stream over wireless channels.     

Molecular Dynamics Study of the Structural and Mechanical Properties of Skutterudite CoSb<Subscript>3</Subscript>: Surface Effect

Molecular dynamics simulations of the structural and mechanical properties of single-crystalline CoSb₃ have been carried out at room temperature. Special emphasis was given to the surface effect. Four different boundary conditions were applied to represent a wide range of surface-atom fractions. The LAMMPS program in conjunction with a multibody potential was employed. First, free relaxation was performed to obtain the corresponding stable configurations. The atomic rearrangements and energy distributions were observed. Then, uniaxial tensile deformation was simulated at a constant strain rate. The stress–strain responses and structural evolutions were examined during the process. Comparison of simulation results between different boundary conditions was carefully made. It was found that, when the scale of the single-crystalline CoSb₃ model becomes nanometric and the fraction of the surface atoms increases, the mechanical performance becomes substantially worse. Nonetheless, the deformation mechanism and intrinsic mechanical nature are very similar.     

Organic–Inorganic Nanohybrids as Novel Thermoelectric Materials: Hybrids of Polyaniline and Bismuth(III) Telluride Nanoparticles

Thermoelectric materials have received much attention recently from the viewpoint of global environmental issues and effective utilization of energy resources. Especially those effective at relatively low temperature, such as below 100°C, which are usually abandoned without use, have become noteworthy recently. From this point of view, organic thermoelectric materials are most attractive, because they could be prepared at low cost and applied in various locations due to their flexibility. We have investigated the thermoelectric properties of organic conducting polymers such as polyaniline, polypyrrole, and polyphenylenevinylene, and succeeded in increasing the thermoelectric performance by selecting dopants, stretching conducting films, etc. Recently we have focused on new systems of organic–inorganic hybrid thermoelectric materials. Herein we present the preparation of a novel system of hybrids of polyaniline and bismuth(III) telluride nanoparticles, starting from bismuth(III) chloride and tetrachlorotellurium by using polyvinylpyrrolidone as a protecting reagent, as well as their thermoelectric properties. The hybrids prepared by this particular method showed much higher thermoelectric performance than the starting organic conducting polymer.     

Interpretation of Absolute Laser Reflectance During Optical Monitoring of Polycrystalline GaAs Deposition on Quartz Using Metalorganic Chemical Vapor Deposition

Gallium arsenide (GaAs) was deposited by metalorganic chemical vapor deposition in a horizontal quartz reactor tube using trimethylgallium and arsine at 400°C to 500°C. Nucleation time and deposition rate were monitored using in situ laser reflectometry. This allowed differentiation between film and parasitic growth, which was not possible with other optical techniques. An absolute reflectance model was developed using measurements prior to GaAs deposition, and then employed to calculate values for GaAs on quartz. Detected reflectance intensities during experimental GaAs deposition were low compared with the model due to three-dimensional island growth, causing scattering of the incident laser radiation.     

A Sharp Interface Model of Intermediate-Phase Growth Under the Influence of Electromigration

A sharp interface model has been developed to model intermediate-phase growth under the influence of electromigration in a binary system. Simulation results show that the phase growth rate depends on both the magnitude and the direction of the applied current. With the current density fixed, at early times, there is a parabolic growth behavior for the intermediate phase, while at longer times, there is a linear phase growth behavior when the electron flow aids diffusion of atoms; however, a limiting thickness is found when the electron flow hinders diffusion. Qualitative analysis shows that the longer time behavior also holds in a binary system with multiple intermediate phases present.     

Studies on Conducting Polypyrrole/Graphene Oxide Composites as Supercapacitor Electrode

An electrode material based on polypyrrole (PPy) doped with graphene oxide (GO) sheets was synthesized via in situ polymerization of pyrrole in the presence of GO in various proportions (5% and 10%). The synthesized samples were characterized by Fourier-transform infrared (FTIR) spectroscopy, ultraviolet–visible (UV–vis) absorption spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), x-ray diffraction (XRD) analysis, and electrical conductivity measurements. FTIR spectroscopy and XRD revealed the interaction between GO and PPy. The direct-current (DC) electrical conductivity (75.8 S/cm) of the prepared composites was dramatically enhanced compared with pure PPy (1.18 S/cm). High specific capacitance of PPy/GO composite of 421.4 F/g was obtained in the potential range from 0 V to 0.50 V at 2 mA compared with 237.2 F/g for pure PPy by galvanostatic charge–discharge analysis. Incorporation of GO into the PPy matrix has a pronounced effect on the electrical conductivity and electrochemical capacitance performance of PPy/GO nanocomposites.     

Microstructure and Thermoelectric Properties of Dense YB<Subscript>22</Subscript>C<Subscript>2</Subscript>N Samples Fabricated Through Spark Plasma Sintering

Dense samples of the higher boride YB₂₂C₂N have been fabricated through the spark plasma sintering (SPS) method with different sintering aids. YB₂₂C₂N is a representative of a series of newly discovered rare-earth borocarbonitrides, which may be the long-awaited n-type counterpart of boron carbide, “B₄C.” The effect of Si, SiC, Al, and TiC additions on the sintering process of YB₂₂C₂N has been studied. The best sintered bodies with densities higher than 90% of theoretical density were obtained by means of SPS at 1700°C. We show that the additive choice and pressure have an effect on grain size and density. An investigation of the effect of atmosphere on the sintering behavior has also been carried out. It was found that sinterability is enhanced under nitrogen atmosphere. Thermoelectric properties of the materials sintered with additives have been evaluated, and we discuss their dependences on the fabrication process route.     

Aqueous-Develop,Photosensitive Polynorbornene Dielectric: Optimization of Mechanical and Electrical Properties

The impact of thermal cure conditions on the mechanical and electrical properties of an epoxy cross-linked network incorporating a polynorbornene (PNB) dielectric polymer was studied. The cross-linking of the dielectric composition was achieved by an acid-catalyzed cationic cure reaction initiated by either thermal or photolytic activation of a photoacid generator. It is proposed that the observed mechanical and electrical properties of the fully cured polymer composition are the result of the development of a three-dimensional cross-linked network tying together the PNB polymer and multifunctional epoxy additives. The epoxy ring-opening reaction was measured using Fourier-transform infrared spectroscopy. The reduced modulus, internal film stress, dielectric constant, and swelling behavior of cross-linked films were studied as a function of curing temperature. Trends in the observed properties are explained by formation of a three-dimensional cross-linked network and degradation of the cross-links between the multifunctional epoxy additives at high temperature. It was also found that exposure of the film to aqueous base plays a role in the cure process and has a positive effect on the final properties. The optimum values of modulus, dielectric constant, residual stress, and moisture content were found for films cured at 160°C for 1 h. This relatively low cure temperature is potentially advantageous in device assembly and processing.