Design challenges of a 65 nm CMOS stacked folded differential PA structure for mobile communications

In this paper, a novel phase-locked loop (PLL) architecture with multiple charge pumps, which is used to design a fast-locking PLL and a low-phase-noise PLL, is proposed. The effective capacitance and resistance of the loop filter in terms of voltage is scaled up/down according to the locking status by controlling the magnitude and direction of the charge pump current. Two PLLs, one with a fast-locking characteristic and the other with a low-phase-noise characteristic, are designed and fabricated in a 0.35-μm CMOS process based on the proposed architecture. The fast-locking PLL has a locking time of less than 6 μs and a phase noise of −90.45 dBc/Hz at 1 MHz offset. The low-phase-noise PLL has a locking time of 25 μs, a phase noise of −105.37 dBc/Hz at 1 MHz offset, and a reference spur of −50 dBc. Both PLLs have an 851.2 MHz output frequency.     

Photoluminescence Analysis of Iron Contamination Effect in Multicrystalline Silicon Wafers for Solar Cells

We investigated the effect of Fe contamination on the electronic properties of dislocation clusters in relation to oxygen precipitation in multicrystalline silicon (mc-Si). Photoluminescence (PL) spectroscopy and mapping were performed at room and liquid-He temperatures on mc-Si wafers before and after Fe contamination. PL spectra consisted of the band-edge emission, the 0.78-eV emission associated with oxygen precipitates, and the dislocation-related D-lines. The Fe contamination increased the electrically active dislocation clusters. Part of these clusters acted as preferential oxygen precipitation sites, and their electronic properties were not further influenced by the Fe contamination.     

Dual-Mode Space-Temporal Simultaneous Processing Equalizer

A tapped delayed line adaptive array antenna (TDL-AAA) and a space-temporal simultaneous processing equalizer (ST-SPE) are proposed as simple space-temporal equalizers based on minimum mean square error (MMSE) criterion. The ST-SPE has a compact hardware with a small number of taps compared to that of the TDL-AAA. The ST-SPE can reduce the computational complexity of the space-temporal joint equalization and it works effectively under the minimum phase condition such as appeared at line-of-sight (LOS) propagation environments at a high antenna height base station. However the ST-SPE cannot work under a non-minimum phase condition caused under N-LOS (non-line-of-sight). On the other hand, the TDL-AAA whose reference signal is synchronized at the center tap (TDL-AAA_C) can work even in the non-minimum phase condition. In this paper, we propose a dual-mode space-temporal simultaneous processing equalizer (Dual-mode ST-SPE) which has a simple configuration and also works in non-minimum phase condition. The Dual-mode ST-SPE can reduce the computational complexity compared to the TDL-AAA_C. Yoshihiro Ichikawa received the B.E. degree in department of communication engineering, in National Defense Academy in 1995, and M.E. and D.E. degree from Ibaraki University in 2001 and 2004, respectively. He joined the Japan Air Self Defense Force in 1995. His research interests are an adaptive algorithm, an antenna design, and an adaptive array antenna. Shigeki Obote received his B.E., M.E. and D.E. degrees in electrical and electronic engineering from Tottori University, Tottori, Japan, in 1996, 1998 and 2000, respectively. Since 2000, he has been with department of media and telecommunications engineering, faculty of engineering, Ibaraki University, Ibaraki, Japan, where he is currently a associate professor. His research interests are in adaptive array antenna and wireless communications systems. Kenichi Kagoshima received the B.E., M.E. and D.E. degrees in electronics engineering from the Tokyo Institute of Technology, Tokyo, Japan, in 1969, 1971, and 1974, respectively. He joined the Nippon Telegraph and Telephone Corporation (NTT) Laboratory in 1974 and researched and developed many kinds of radio communication antennas. Since 1997, he has been a professor at Ibaraki University, Ibaraki, Japan. Dr. Kagoshima was a Secretary and Treasure, Vice Chairman, and Chairman of the IEEE AP-S Tokyo Chapter in 1992, 1993, and 1994, respectively. He was a chair of antennas and propagation professional group of IEICE in 1999 and 2000. In 1973, he received the Yonezawa Prize for Young Engineers and 1998, best paper award from IEICE, respectively.     

2D DOA estimation for noncircular sources using L-shaped sparse array

We present an algorithm for two-dimensional (2D) direction-of-arrival (DOA) estimation of noncircular sources using an L-shaped sparse array. An L-shaped sparse array consisting of two co-prime arrays is firstly introduced. Then, the fourth-order-cumulants (FOCs) of received data are used to construct a FOC matrix (FOCM), by which we can get the estimations of elevation angles. With the estimated elevation angles, the azimuth angles can be estimated by a low-complexity signal separation algorithm. During the procedure used for estimating azimuth angles, no any eigenvalue decomposition (EVD), peak search and pair-matching procedure need to be implemented. Although the aperture is extended significantly, the computation complexity of proposed algorithm still is acceptable. Compared with some analogous algorithms, our approach shows more attractive estimation performance. A lot of simulation results prove the advantages of proposed DOA estimation technology.     

330 GHz FMCW Image Sensor for Homeland Security Applications

A single-pixel imaging remote sensor operating at 330 GHz is described. It is based on a frequency modulated continuous wave (FMCW) and aimed at detection of concealed objects for ranges up to 40 m. The system consists of 2 horn-lens antennas integrated with a homodyne transceiver. The synthesized linear FMCW signal at X-band is multiplied by a factor of 32 to generate the transmitted signal. An intermediate frequency (IF) signal obtained in the output port of the 2-nd harmonic mixer is employed for image processing. Distance measurements were made by performing data acquisition unit based on LabView interface and resulting in a range resolution about 1 cm. Examples of 2D and 3D images reconstructed with this sensor are presented.     

Design and implementation of multicasting for multi-channel multi-interface wireless mesh networks

Multicasting is a useful communication method in wireless mesh networks (WMNs). Many applications in WMNs require efficient and reliable multicast communications, i.e., high delivery ratio with low overhead among a group of recipients. In spite of its significance, little work has been done on providing such multicast service in multi-channel WMNs. Traditional multicast protocols for wireless and multi-hop networks tend to assume that all nodes, each of which is equipped with a single interface, collaborate on the same channel. This single-channel assumption is not always true, as WMNs often provide nodes with multiple interfaces to enhance performance. In multi-channel and multi-interface (MCMI) WMNs, the same multicast data must be sent multiple times by a sender node if its neighboring nodes operate on different channels. In this paper, we try to tackle the challenging issue of how to design a multicast protocol more suitable for MCMI WMNs. Our multicast protocol builds multicast paths while inviting multicast members, and tries to allocate the same channel to neighboring members in a bottom-up manner. By unifying fixed channels of one-hop multicast neighbors, the proposed algorithm can improve the performance such as reducing multicast data transmission overhead and delay, while managing a successful delivery ratio. In order to prove such expectation on the performance, we have implemented and evaluated the proposed solution on the real testbed having the maximum 24 nodes, each of which is equipped with two IEEE 802.11a Atheros WLAN cards.     

Cooperative energy management in distributed wireless real-time systems

This work is based on the observation that existing energy management techniques for mobile devices, such as Dynamic Voltage Scaling (DVS), are non-cooperative in the sense that they reduce the energy consumption of a single device, disregarding potential consequences for other constraints (e.g., end-to-end deadlines) and/or other devices (e.g., energy consumption on neighboring devices). This paper argues that energy management in distributed wireless real-time systems has to be end-to-end in nature, requiring a coordinated approach among communicating devices. A cooperative distributed energy management technique (Co-DVS) is proposed that (1) adapts and maintains end-to-end latencies within specified timeliness requirements (deadlines) and (2) enhances energy savings at the devices with the highest pay-off factors that represent the relative benefits or significance of conserving energy at a device. The proposed technique employs a feedback-based approach to dynamically distribute end-to-end slack among the devices based on their pay-off factors.     

PRNN/ERLS-based predictive QoS-promoted DBA scheme for upstream transmission in EPON

This article proposes a PRNN/ERLS-based predictive QoS-promoted dynamic bandwidth allocation (PQ-DBA) scheme for upstream transmission in Ethernet passive optical network (EPON) systems. The proposed PQ-DBA scheme originally divides incoming packets of voice, video, data service traffic into six priorities, where packets having less room before QoS requirements violation or being in starvation situation will be dynamically promoted to high priority cycle-by-cycle. It predicts packets arriving at prediction interval for ONUs using pipeline recurrent neural network (PRNN)/extended recursive least squares (ERLS) so that the bandwidth allocation can be more up-to-date and then accurate. Simulation results show that the proposed PQ-DBA scheme achieves higher system utilization and lower average voice, video, data packet delay time than the DBAM scheme [Luo and Ansari, OSA J Opt Netw 4(9):561–572] by 4, and 21, 90, 43%, respectively, and the PQ-DBA scheme but without prediction by 2, and 26, 29, 34%, respectively.     

Formulae for determining heterodyne system spurious frequencies that coincide with desired output frequency

In this paper, formulae to determine the lowest order and other higher order spurious frequencies that coincide with desired output signal frequencies of mixers have been derived. The proposed formulae give general expressions that are suitable for any order of heterodyne mixing. The formulae have been verified using a suitable example and compared with the simulation results obtained through the radio frequency simulation software of Advanced Design System. The formulae directly reveal the order of the troublesome spurious frequencies that the designers would encounter in heterodyne systems. In comparison with these direct formulae, the results of existing spurious analysis software are based on the maximum order of simulation carried out. Based on these simulations, the coinciding spurious components have to be manually sorted out. Proposed formulae are quick tools used by the microwave system and circuit designers for choosing and finalizing heterodyne frequencies in their designs without the need for any simulations.     

The Design of Linear-Phase FIR Multiple-Notch Filters with Variable Notch Frequencies

In this paper, a paradigm is developed to design the linear-phase FIR multiple-notch filters with variable notch frequencies. The design procedure can be proceeded through two steps: First, a linear-phase narrow-band low-pass filter met the given bandwidth and stopband ripple specifications is designed. Second, a tuning procedure is applied to the computed low-pass filter to yield the desired multiple-notch filter. When the notch frequencies are varied, the same tuning procedure can be employed to render the multiple-notch filter with the new set of the notch frequencies. The tuning procedure employed reduces the computational complexity of designing the multiple-notch filter with the new set of the notch frequencies. The simulation results demonstrate the effectiveness of our scheme.