Wind energy systems

Wind energy has matured to a level of development where it is ready to become a generally accepted utility generation technology. A brief discussion of this development is presented, and the operating and design principles are discussed. Alternative designs for wind turbines and the tradeoffs that must be considered are briefly compared. Development of a wind energy system and the impacts on the utility network including frequency stability, voltage stability, and power quality are discussed. The assessment of wind power station economics and the key economic factors that determine the economic viability of a wind power plant are presented     

Determination of best shortened linear codes

The quality of a block code is determined by its capability to protect data against undetectable errors and by the number of check bits that are required for that purpose. For a given number of check bits there are codes with optimum bit error detecting capability in shortened block lengths. These codes are determined and tabulated. The residual error characteristics of some of the tabulated codes are compared with those specified in ISO/CCITT or IEC standard data transmission protocols. For block lengths and bit error rates that are typical in process control applications, the residual error rate of the determined codes is more than six orders of magnitude smaller than that of codes specified by widely used standard transmission protocols     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Pulsed-current duty cycle dependence of electromigration-inducedstress generation in aluminum conductors

The effect of duty cycle of pulsed dc currents on the critical length-current density product, (jl_c), was measured using the Blech-Kinsbron edge-displacement technique [Thin Solid Films 25, 327 (1975)]. Unencapsulated Al edge-displacement segments mere stressed at various duty cycles and the critical lengths, the so-called “Blech lengths”, were measured. It was found that jl_c increased with decreasing duty cycle. We measured a factor of 2.6 increase in jl_c for the 25% duty cycle as compared to dc. This duty cycle dependence of Blech length implies that electromigration resistance for an integrated circuit would be increased for small duty cycle operation by increasing the fraction of interconnects which are sub-Blech-length and are not susceptible to EM damage     

Frequency transfer function of an opto-pneumatic detector

An example of an opto-pneumatic detector's (OPD) frequency transfer function is presented for the development of an opto-pneumatic interface. The theoretical model is tested through experiments in the laboratory on a real OPD prototype. In this way many of the model's parameters are studied and evaluated, such as the dimensions of the gas chamber, the thickness of the absorbent body, and the load of the OPD. The results obtained are good and show the utility of the studies described here.     

Low-voltage BiCMOS dynamic minimum circuit using a parallelcomparison algorithm for fuzzy controllers

The authors present a low-voltage BiCMOS dynamic minimum circuit using a parallel comparison algorithm for VLSI implementation of fuzzy controllers. Using low-voltage BiCMOS dynamic circuits and a parallel comparison algorithm, a four-4-bit-input minimum circuit designed, based on a 1μm BiCMOS technology, shows a 9.5ns comparison time, which is a ×2.5 improvement in speed as compared to that based on CMOS technology     

Molecular electric field mapping of some anions and cations of 2- aminopurine and 6- thioguanine

Electric fields of the anions, cations and neutral forms of 2-aminopurine and 6-thioguanine have been mapped. Certain important features of the maps are similar to those found earlier in the neutral and ionic forms of adenine and guanine. The computed electric field patterns satisfactorily explain reactive sites and biological activity of the molecules.     

Distributed channel assignment strategies using coexistenceetiquettes for land based radio environment

The performance of two distributed channel assignment algorithms which use coexistence etiquettes for point to point links are considered by the authors. It has been found that selecting channels prior to transmission at the transmitter as opposed to the receiver, supports greater offered traffic with the additional advantage of a less complex protocol     

Extending trouble ticket systems to fault diagnostics

Network management in large heterogeneous communication environments requires the incorporation of more advanced tools than are currently available, especially in the area of fault management. By providing an informational infrastructure for documenting network behavior and maintenance activities, TTSs (trouble ticket systems) have provided some relief for the fault management problem. Researchers have recognized TTSs as a means for realizing more advanced functions in network management platforms to effect automatic trouble ticket generation, fault diagnostics, and the correlation of multiple views network problems and behavior. The authors describe current research trends towards understanding and implementing these advanced functions in a TTS framework     

Low-delay distortion recursive (IIR) transmultiplexer

A new scheme based on using an IIR design algorithm is presented to demultiplex critically sampled QPSK channels for onboard processing (OBP) satellites. Comparisons with an existing nonrecursive (FIR) transmultiplexer (TMUX) show that the presented IIR TMUX is also a suitable candidate for consideration in future OBP applications