Surface protonation data of kaolinite-reevaluation based on dissolution experiments

The aim of the present study is to compare available surface titration curves of kaolinite, to explain the differences between them, and to constrain their interpretation based on predictions of surface protonation that emerged from dissolution experiments. Comparison of six surface titration curves obtained at 25 degrees C reveals significant discrepancies, both in the shape of the curves and in the pH of the point of zero net proton charge (pH(PZNPC)). Based on an analysis of the different sites available for adsorption on kaolinite surfaces we conclude that different kaolinite samples are expected to have similar pH(PZNPC). Therefore, the major reason for the differences in the observed surface protonation is related to the different ways in which the pH(PZNPC) was determined. To compare the titration curves, some of the curves were recalculated so that the proton surface concentrations of all the titration curves would be zero around pH 5. As a result, we obtained a good agreement between the titration curves. A prediction of the molar fraction of protonated sites was retrieved from modeling of kaolinite dissolution reaction and was compared to the protonation data obtained from surface titration. The model successfully predicts the surface protonation data of most of the surface titrations.     

Characterization of a lipid-rich fraction synthesized by Streptomyces avermitilis

Isolation of the macrocyclic lactone parasiticide avermectin and other closely related natural products produced by Streptomyces avermitilis also yields a lipid-rich fraction. The latter has been characterized by techniques based on gas-liquid chromatography (GLC) and mass spectrometry (MS). Initial examination of the lipid-rich fraction by direct probe electron-impact (EI) MS and packed-column GLC showed that it consists primarily of a mixture of triglycerides possessing C14-C17 acyl groups. Further examination of this fraction by capillary column GLC-MS demonstrated that it contains low levels of C15-C17 free fatty acids, squalene and diglycerides and, as the major components, at least ten mixed acyl triglycerides (total number of acyl carbon atoms ranging from 43 to 50). Prominent among the triglycerides were a C15-C15-C16 species, a C15-C16-C16 species and a C15-C16-C17 species. Capillary-column GLC and GLC-MS of the fatty acid methyl esters resulting from transesterification demonstrated that the major triglyceride acyl groups are anteiso-C15 (12-methyltetradecanoyl), iso-C16 (14-methylpentadecanoyl), n-C16 (hexa-decanoyl) and anteiso-C17 (14-methylhexadecanoyl). Lower levels of the methyl esters of the following fatty acids were observed: iso-C14 (12-methyltridecanoic), n-C14 (tetradecanoic), iso-C15 (13-methyltetradecanoic), n-C15 (pentadecanoic), iso-C17 (15-methylhexadecanoic) and n-C17 (heptadecanoic). Little evidence was seen for either unsaturated acyl groups or acyl groups of less than 13 or more than 18 carbon atoms. Desorption chemical ionization MS (ammonia reagent gas) analysis confirmed the nature of the lipid-rich fraction, and is an attractive one-step approach for determining the molecular weights and distribution of triglycerides in a mixture.     

Muon spin rotation in superconductors

By means of the muon spin rotation technique (⁺SR), the temperature dependence of the magnetic field inside the normal-conducting domains of high-purity tantalum crystals in the intermediate state has been measured in the temperature range 2.36K+SR. Possible applications of these findings to the study of long-range diffusion of positive muons at low temperatures are indicated.     

Trapping by vacancies and mobility of positive muons in neutron-irradiated aluminium

By means of the muon spin rotation (µSR) technique the trapping at vacancies and the mobility of positive muons are investigated in the temperature range 2.5 K to 297 K in polycrystalline aluminium irradiated with fast neutrons at 4.6 K. The observed damping of the µSR signal at temperatures below 50 K is in good agreement with saturation trapping at monovacancies. The temperature dependence of the damping above 50 K indicates that the muon diffusivity exhibits a minimumD _min ^µ+ 110^–13 m² s^–1 near 125 K, which is explained by a transition from coherent to incoherent tunneling. With the help of an estimated trapping cross section a monovacancy concentration of ~3 × 10^–4 after 125 K annealing is deduced, in good agreement with measurements of the residual electrical resistivity. As expected, the vacancy recovery shows up in an irreversible decrease of the damping above ~ 175 K.Work supported by the Bundesminister für Forschung und Technologie and by Schweizerisches Institut für Nuklearforschung (SIN). Requests for reprints and correspondence should be addressed to A. Seeger, MPI für Metallforschung, Heisenbergstraße 1, D 7000 Stuttgart-80, Germany     

Recovery of technetium adsorbed on charcoal</p> </p>

Two methods capable of near complete recovery of technetium adsorbed on charcoal are presented. The first involves liquid extraction of the technetium from the charcoal by hot 4M nitric acid. An average recovery of 98% (n=3) is obtained after three rounds of extraction. The second method involves dry ashing with air in a quartz combustion tube at 400-450 °C. This method yields an average recovery of 96% (n=5). Other thermal methods were attempted, but resulted in reduced recovery and incomplete material balance.</p> </p>     

Catalyst/cocatalyst nuclearity effects in single-site polymerization. Enhanced polyethylene branching and alpha-olefin comonomer enchainment in polymerizations mediated by binuclear catalysts and cocatalysts via a new enchainment pathway

The binuclear "constrained geometry catalyst" (CGC) (mu-CH2CH2-3,3'){(eta5-indenyl )[1-Me2Si(tBuN)](ZrMe2)}2 [EBICGC(ZrMe2)2; Zr2] and the trityl bisborate dianion (Ph3C+)2[1,4-(C6F5)3BC6F4B(C6F5)3]2- (B2) have been synthesized to serve as new types of multicenter homogeneous olefin polymerization catalysts and cocatalysts, respectively. Additionally, the complex [1-Me2Si(3-ethylindenyl)(tBuN)]ZrMe2 (Zr1) was synthesized as a mononuclear control. For the bimetallic catalyst or bisborate cocatalyst, high effective local active site concentrations and catalyst center-catalyst center cooperative effects are evidenced by bringing the catalytic centers together via either covalent or electrostatic bonding. For ethylene homopolymerization at constant conversion, the branch content of the polyolefin products (primarily ethyl branches) is dramatically increased as catalyst or cocatalyst nuclearity is increased. Moreover, catalyst and cocatalyst nuclearity effects are approximately additive. Compared to the catalyst derived from monometallic Zr1 and monofunctional Ph3C+B(C6F5)4- (B1), the active catalyst derived from bimetallic Zr2 and bifunctional B2 produces approximately 11 times more ethyl branches in ethylene homopolymerization via a process which is predominantly intradimer in character. Moreover, approximately 3 times more 1-hexene incorporation in ethylene + 1-hexene copolymerization and approximately 4 times more 1-pentene incorporation in ethylene + 1-pentene copolymerization are observed for Zr2 + B2 versus Zr1 + B1.     

A small-core multiconfiguration Dirac–Hartree–Fock-adjusted pseudopotential for Tl – application to TlX (X = F, Cl, Br, I)

 A relativistic pseudopotential of the energy-consistent variety simulating the Tl²¹⁺ (1s– 4f) core has been generated by adjustment to multiconfiguration Dirac–Hartree–Fock data based on the Dirac–Coulomb–Breit Hamiltonian. Valence ab initio calculations using this pseudopotential have been performed for atomic excitation energies and for spectroscopic constants of the X0⁺ and A0⁺ states of TlX (X = F, Cl, Br, I). Comparison is made to experiment and to four-component density functional results. Received: 22 June 1999 / Accepted: 5 August 1999 / Published online: 15 December 1999