Reconstruction of the water-oxidizing complex in manganese-depleted Photosystem II using synthetic manganese complexes

The efficiency of a trinuclear and two binuclear manganese complexes in reconstituting electron transport and O(2) evolution activity in Mn-depleted Photosystem II preparations is analyzed. The trinuclear Mn-complex is more efficient than two binuclear Mn-complexes in restoring oxygen evolution, but it is less effective as an electron donor than binuclear Mn-complexes. It is inferred from our results that recovery of electron transport and O(2) evolution with polynuclear Mn-complexes is affected with different factors. Moreover, the trinuclear Mn-complex is extremely sensitive to the addition of CaCl(2). It is suggested that there is an interaction between Ca(2+) and carboxyl within the trinuclear Mn-complex during photoactivation and this interaction benefits the ligation of Mn atom to the apo-WOC and form an active WOC. Binuclear Mn(III)Mn(III) complex shows slightly higher efficiency than binuclear Mn(III)Mn(IV) complex in restoration of O(2) evolution activity. The efficiency of three Mn-complexes in the reconstitution of WOC is in an order: trinuclear Mn(3)(III)>binuclear Mn(III)Mn(III)>binuclear Mn(III)Mn(IV).     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

锆对铂重整催化剂性能的影响规律

以正庚烷的转化为探针反应 ,研究了添加元素锆对铂重整催化剂性能的影响规律。结果表明 ,在 4 50℃和连续流动条件下 ,Pt/γ -Al2 O3催化剂中引入锆不仅能够提高铂催化剂的稳定性和芳构化产率、抑制氢解和异构化 ,而且能使铂催化剂保持初活性。锆含量在 0 .56%左右 ,其调变作用最为显著。     

三组分(NiO、La2O3、SiO2)负载型加氢催化剂中La2O3的作用

用X射线衍射分析、FT-IR、小角X光散射等方法研究了浸渍法制备的NiO/SiO_2和NiO/(La_2O_3+SiO_2)样品中组分之间的相互作用。La_2O_3在SiO_2上可形成近乎密置单层的分散。在负载了La_2O_3的SiO_2上,NiO的分散程度比在SiO_2上有明显提高,也更容易被还原,而且还原后所得金属镍粒子的平均粒度降低,小粒子所占百分比提高。这些结果表明,NiO/(La_2O_3+SiO_2)比NiO/SiO_2样品具有更高的加氢还原硝基普鲁卡因为胺基普鲁卡因的活性,与Ni/(La_2O_3+SiO_2)比Ni/SiO_2活性高的情形相一致。     

用于气/固吸附的微分吸附热测定装置

本文介绍了一套吸附热测定装置, 它是对法国SETARAM高温量热计进行了适当变动后而建成的。用它可以测定在室温～800 K范围内气/固吸附的微分吸附热。在实验过程中, 吸附量是用光标微压计进行测量。用电标定法代替标准物质法来测定该装置的热定量因子, 这更适合于在恒温条件下的吸附热测定。用这套装置测定了吡啶在HY分子筛上于不同温度下的吸附热。     

Synthesis and characterization of aniline and aniline-o-sulfonic acid copolymers

The copolymer of aniline (An) and aniline-o-sulfonic acid (AS) is synthesized by chemical oxidation polymerization. The effects of mole ratio of copolymerized monomers on chain structure, thermostability, conductivity, redox properties of copolymer are discussed. It is indicated that if more AS monomers in polymerization system the corresponding structure units will increase, but their relation isn’t linear. When An:AS = 1:1, the ratio of structure unit in copolymer is 9:1, and it is only 1:2 for copolymer with An:AS = 1:6. The measurements of conductivity and redox activity also prove that the properties of An-co-AS(1:1), (1:3), and (1:4) are similar to polyaniline due to more An units than AS. When An:AS is higher than 1:6, it shows out the properties of copolymer is similar to those of poly(aniline-o-sulfonic acid), and their redox route is different. They will transform to follow the route of LH ↔ EH ↔ P. The results of thermo-analysis indicate that the decomposition temperature of AS units is lower than An units because of the electron-withdrawing group substitution. The decomposition temperature of polymer is related to dopant and doping degree. Electron-withdrawing group, -SO₃H, substitution and HCl doping will decrease polymer chain decomposition temperature. The mechanism of copolymerization of An and AS is different from homopolymerization. The monomer with low oxidation potential forms free radical cation firstly, which transfers to monomer with higher oxidation potential and initiates its polymerization.     

Direct synthesis, characterization of Cu-SBA-15 and its high catalytic activity in hydroxylation of phenol by H2O2

Transition metal copper substituted mesoporous silica (Cu-SBA-15) was synthesized using triblock copolymers surfactant as template agent under acidic condition. The result Cu-SBA-15 was characterized with XRD, ICP-AES, FT-IR and N₂ adsorption–desorption measurements, which prove that Cu(II) was mainly incorporated into the framework of Cu-SBA-15. Its catalytic activity was studied for phenol hydroxylation using H₂O₂ (30%). The substituting element (Cu²⁺) is incorporated into the framework position forming a new type of active site which raises the phenol conversion to 62.4% and the diphenol (the mixture of catechol (CAT) and hydroquinone (HQ)) selectivity to 97%. The Cu-SBA-15 has very high selectivity for catechol (about 71% selectivity), which is completely different from that of the microporous titanium silicalite zeolites (47.1% phenol conversion and about 50% selectivity to CAT under same reaction conditions). The results obtained indicate that the selective oxidation of phenol with H₂O₂ by a radical substitution mechanism.     

A new imidazolylquinoline for organic thin film transistor

A new active electronic material, 2-(naphtho[3,4]imidazol-2-yl)quinoline (NIQ), 1, has been synthesized and fully characterized. This compound exhibits field-effect carrier mobility and behaves as a p-type semiconductor (μ_FET = 0.148 cm²/V s at V_DS = 10 V). NIQ and its related imidazolylquinoline compounds may have possible applications as active materials in organic thin film transistors.     

Analysis of effective molecular diffusion rates for verteporfin in subcutaneous versus orthotopic Dunning prostate tumors

Photosensitizer biodistribution change inside tissue is one of the dominant factors in photodynamic therapy efficacy. In this study, the pharmacokinetics of a benzoporphyrin derivative (BPD), delivered in verteporfin for injection formulation, have been quantified in the rat Dunning prostate tumor MAT-LyLu model, using both subcutaneous and orthotopic sites. Blood plasma sampling indicated that BPD had a bi-exponential metabolic lifetime in vivo, with the two lifetimes being 9.6 min and 8.3 h. The spatial distributions in the tumor were quantified as a function of distance from the perfused blood vessels, using fluorescence histologic images of the tumor. A fluorescent vascular marker was used to obtain locations and shapes of perfused capillaries at a wavelength of emission different from that of BPD and to allow colocalized images to be acquired of vessel and BPD locations. Using the BPD fluorescence images obtained 15 min after intravenous administration, a forward finite-element solution to the diffusion equation was used to predict the drug distribution by matching the fluorescence intensity images observed microscopically. An inverse solver was used to minimize the root mean square error between the image of simulated diffusion and the experimental image, resulting in estimation of the diffusion coefficient of BPD in the tumor models. Effective diffusion coefficients were 0.88 and 1.59 microm2/s for the subcutaneous and orthotopically grown tumors, respectively, indicating that orthotopic tumors have significantly higher vascular extravasation rates as compared with subcutaneous tumors. This analysis supports the hypothesis that leakage rates of the photosensitizer vary considerably. Thus, although varying the time between injection and optical irradiation may be used to vary the targeting between vascular and less vascular areas, the precise time of treatment will depend on the nature of the permeability of the vasculature in the tissue being treated.     

显微共焦拉曼光谱研究电化学合成聚苯胺膜

显微共焦拉曼技术被用来研究电化学合成的聚苯胺（PANI）膜. 研究结果表明：在不同的激发光聚焦深度，聚苯胺膜的拉曼光谱有明显变化.从而反映出聚苯胺膜的掺杂程度在膜生长过程中随膜厚度的增长而增加. 并由X射线电子能谱（XPS）和紫外吸收光谱（UV）分析证实.