Cr(III)/Cr(VI) speciation in water samples by extractive separation using Amberlite CG-50 and final determination by FAAS

Twenty-five uncultivated surface soil samples collected from the northern and southern regions of Dhaka Export Processing Zone (DEPZ), industrial area of Bangladesh, were analyzed for their contents of Y, lanthanides and natural radionuclides (Th and U) using an inductively coupled plasma mass spectrometer (ICP-MS). Analogous concentrations of the Y, lanthanides, Th and U were observed in the both regions of DEPZ around several kilometer distances. Further, the measured values showed no particular contamination. However, the concentrations of the light lanthanides (La, Ce and Nd) in the Bangladeshi soils were around twice the worldwide average value. But, the smooth curve of the chondrite normalized patterns of the lanthanides suggested that the lanthanide contents of the Bangladeshi soils in this area are the results of the natural dispersion process rather than anthropogenic activities. In addition, the relatively high Th and U concentrations and Th/U ratio were observed in Bangladeshi soils of this area, most likely due to the effect of their parent materials such as clay stones which have a high Th/U ratio. Since this is the first precise result for the Y, lanthanides, Th and U contents in Bangladeshi soils, it could be useful in understanding the background level and the characteristics of these elements in Bangladeshi soils.     

Conversion of biomass residual to acid-modified bio-chars for efficient adsorption of organic pollutants from industrial phosphoric acid: an experimental,kinetic and thermodynamic study

ABSTRACT

This study reports the removal of organic matters from phosphoric acid using waste-produced bio-charcoal structures. Particularly, the freshly made bio-char species via pyrolysis and two sub-driven acids activated charcoals were applied during the removal process. The treated charcoal with hydrochloric and nitric acids had attained a higher adsorption rate for organic matters than that of the non-treated one. Removal percentages of 70% and 60% were, respectively, attained by acid-modified chars. The kinetics of the adsorption process was fitted via pseudo-first/second-order and Morris–Weber models. The thermodynamic parameters of the presented sorption process indicate that organic matter removal has been endothermic, physical and spontaneous.     

Lipase biosensor for tributyrin and pesticide detection

Potentiometric biosensors based on Candida rugosa lipase was described for the detection of organophosphorus pesticide; methyl-parathion and tributyrin. Lipase was immobilized on the glass electrode by means of a gelatin membrane, which is then cross-linked with glutaraldehyde. The principle of the biosensor is based on the measurement of pH variation which was recorded in millivolts due to the enzymatic hydrolysis of tributyrin to butyric acid. For the inhibitor detection, biosensor responses were measured after pesticide treatment, which caused a drop in enzyme activity because of the irreversible inhibition. Reactivation conditions of the reused enzyme electrodes were also investigated by pyridine-2-aldoxime methiodide (2-PAM). The limit of detection for tributyrin was estimated as 93?µM for lipase sensor within the linear range of 65–455?µM.     

Determination of carbaryl by flow injection with luminol chemiluminescence inhibition detection

A flow-injection procedure is described for the determination of carbaryl based on its inhibition effect on luminol-cobalt(II) chemiluminescence reaction in alkaline medium in the presence of hydrogen peroxide. The calibration data over the range 5.0?×?10^?7 to 20?×?10^?6?M give a correlation coefficient (r ²) of 0.9972 with relative standard deviations (RSD; n?=?4) in the range of 1.0–2.1% with a limit of detection (3?×?blank noise) of 2.37?×?10^?7?M for carbaryl. The sample throughput was 120?h^?1. The effects of some carbamates, anions, and cations were studied on luminol CL system for carbaryl determination. The proposed method has been applied to determine carbaryl in natural waters.     

Flotation separation and electrothermal atomic absorption spectrometric determination of lead in water samples

Abstract

The application of macro- and micro-electrodes constructed using the new ionophore were tested in a range of solution compositions reflecting concentrations found in fresh waters, and containing Cl^?, NO₃ ^?, SO₄ ^2-, HCO₃ ^2-, H₄SiO₄ and a natural humic acid. The inhibition of the electrode responses to these ions was quantified using a mixed-solution method by optimising the agreement between the measured potentials and predictions from the Nicolsky-Eisenman equation. In addition, measurements were made in separate solutions of KC1 to enable results to be compared with the literature. Apart from the results obtained for humic acid, mean selectivity coefficients for 16 macro- and 21 micro-electrode experiments are given. The results indicate inhibition of the electrode response to phosphate for all the anions in the concentration ranges of 0.05–1 mM Cl^?, 0.1–1.0 mM NO₃ ^?, 0.1–10.0 mM HCO₃ ^? and 0.1–1.5 mM SO₄ ^2- with high selectivity for HPO₄ ^2- in the presence of both dissolved silicon and a standard humic acid. This means that the application of the electrodes to hard waters is impracticable although studies of soft waters and laboratory studies in controlled conditions, e.g. calcium phosphate precipitation experiments, are feasible.     

Nanosized sulfated zirconia as solid acid catalyst for the synthesis of 2-substituted benzimidazoles

The condensation reaction of o-phenylenediamine and arylaldehydes was investigated in the presence of nanosized sulfated zirconia (SO ₄ ^2? -ZrO₂) as the solid acid catalyst. Nanosized SO ₄ ^2? -ZrO₂ was prepared and characterized by the XRD, FT-IR, and SEM techniques. The results confirm good stabilization of the tetragonal phase of zirconia in the presence of sulfate. Reusability experiments showed partial deactivation of the catalyst after each run; good reusability can be achieved after calcinations of the recovered catalyst before its reuse.     

Spectral analysis of naringenin deprotonation in aqueous ethanol solutions

The deprotonation of 5,7-dihydroxy-2-(4-hydroxyphenyl)chroman-4-one (naringenin) was studied in aqueous solutions of ethanol and 0.1 mol L^?1 sodium perchlorate at 25°C. The chemical species that contributed to deprotonation were evaluated together with their pure spectral characteristics and concentration profiles by some chemometric methods. The deprotonation constants assigned by pK ₁, pK ₂, and pK ₃ were determined by multivariate curve analysis of spectral data at different pcH values. The pure spectral analysis concordant with the theoretical prediction of deprotonation constants indicates that the acidity of hydroxyl groups in naringenin decreases in the order: 7-OH, 4′-OH, 5-OH. The effects of the solvent on deprotonation were analysed in terms of the linear solvation energy relationships using the model of Kamlet, Abboud, and Taft (KAT). Multiple linear regressions were aimed towards correlating the deprotonation constants with the microscopic parameters containing hydrogen-bond acidity (α), dipolarity/polarisability (π*), and hydrogen-bond basicity (β). The most significant parameter was found to be the hydrogen-bond acidity of binary mixtures.     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

Ultrasound-assisted emulsification microextraction using low density solvent for analysis of toxic nitrophenols in natural waters

An ultrasound-assisted emulsification microextraction (USAEME) based on low-density solvents was successfully applied for the extraction and pre-concentration of four toxic nitrophenols in water samples. The extracted analytes were analyzed by high-performance liquid chromatography-UV detection. The important parameters influencing the extraction efficiency were studied and optimized utilizing two different optimization methods: one variable at a time (OVAT) and central composite design (CCD). The results showed that the emulsification process can be completed in a few seconds using low-density solvents, but almost 10–20?min is necessary for high-density solvents. Under the optimum conditions (extraction solvent, 1-octanol; extraction solvent volume, 40?µL; sample pH, 3.0; salt concentration, 20% (w/v) NaCl; extraction temperature, 40 (±3)°C), limits of detection of the method were in the range of 0.25 to 1?µg?L^?1 and the repeatability and reproducibility of the proposed method, expressed as relative deviation, varied in the range of 2.2–4.2% and 4.7–6.9%, respectively. Linearity was found to be in the range of 1 to 200?µg?L^?1 and the preconcentration factors (PFs) were between 77 and 175. The relative recoveries of the four nitrophenols from water samples at spiking level of 10.0?µg?L^?1 were in the range of 92.0 to 115.0%.     

Determination of chlorophenols in environmental water samples using directly suspended droplet liquid-liquid-liquid phase microextraction prior to high-performance liquid chromatography

A new sample preparation method named directly suspended droplet liquid-liquid-liquid phase microextraction was used in this research for determination of three chlorophenols in environmental water samples. The analytes (2-chlorophenol, 3-chlorophenol and 4-chlorophenol) were extracted from 4.5?mL acidic donor phase, (pH 2, P1) into an organic phase, 350?µL?of benzene/1-octanol (90?:?10 v/v, P2) and then were back-extracted into a 7?µL droplet of an basic (pH 13) aqueous solution (acceptor phase, P3). In this method, contrary to the ordinary single drop liquid-phase microextraction technique, an aqueous large droplet is freely suspended on the surface of the organic solvent, without using a microsyringe as supporting device. This aqueous microdroplet is delivered at the top-centre position of an immiscible organic solvent which is laid over the aqueous donor sample solution while the solution is being agitated. Then, the acceptor phase containing chlorophenols was withdrawn back into a HPLC microsyringe and neutralised by adding of 7?µL HCl 0.1?M. The total amount was eventually injected into the HPLC system with UV detection at 225?nm for further analysis. Parameters such as the organic solvent, phases volumes, extraction and back-extraction times, stirring rate and pH values were optimised. The calibration graphs are linear in the range of 10–2000?µg?L^?1 with r?≥?0.9973. The enrichment factors were ranged from 115 to 170, and the limit of detection (LOD, n?=?7) varied from 5 to 10?µg?L^?1. The relative standard deviations (RSDs, n?=?5) were found 6.8 to 7.4 at S/N?=?3. All experiments were carried out at room temperature, (22?±?0.5°C).