Determination of the Heat Transfer Coefficient of Metal Oxide Based Water Nanofluids in a Laminar Flow Regime Using an Adaptive Neuro-Fuzzy Inference System

In order to enhance the thermal properties of turbine oil (TO), three different nanoparticles (CuO, Al₂O₃, and TiO₂) are loaded into the TO. To measure the thermal performance of nanoparticle-based TO nanofluids at laminar flow and under constant heat flux boundary conditions, an experimental setup was applied. The obtained data clearly demonstrate the positive effect of all nanoparticles on the heat transfer rate of TO. As the most important factor, the heat transfer coefficient of the abovementioned two-phase systems is increased upon increasing both the volume concentration and the flow rate. An adaptive neuro-fuzzy inference system (ANFIS) is applied for modeling the effect of critical parameters on the heat transfer coefficient of nanoparticle-TO based nanofluids numerically. The results are compared with experimental ones for training and test data. The results suggest that the developed model is valid enough and promising for predicting the extant of the heat transfer coefficient. R² and MSE values for all data were 0.990208751 and 108.1150734, respectively. Based on the results, it is obvious that our proposed modeling by ANFIS is efficient and valid, which can be expanded for more general states.     

(N-Isocyanimino)triphenylphosphorane-Mediated,One-Pot,Efficient Synthesis of Sterically Congested 1,1,1-Trifluoro-2-(5-aryl-1,3,4-oxadiazol-2-yl)-2-propanol Derivatives via Intramolecular Aza-Wittig Reaction

Reactions of (N-isocyanimino)triphenylphosphorane with 1,1,1-trifluoroacetone in the presence of aromatic (or heteroaromatic) carboxylic acids (3-methylbenzoic acid, 1-naphthalenecarboxylic acid, 2-naphthalenecarboxylic acid, 2-furancarboxylic acid, and 2-thiophenecarboxylic acid) proceed smoothly at room temperature and in neutral conditions to afford sterically congested 1,1,1-trifluoro-2-(5-aryl-1,3,4-oxadiazol-2-yl)-2-propanol derivatives in high yields. The reaction proceeds smoothly and cleanly under mild conditions, and no side reactions were observed.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Investigating the effect of operating parameters on the open circuit voltage of a passive DMFC

The variations of the open circuit voltages (OCVs) were studied in a passive air-breathing direct methanol fuel cell with an air-breathing cathode using Nafion 115 as the electrolyte membrane. The effects of some operating parameters such as cell temperature, cell orientation, and also methanol concentration on the OCV of fabricated fuel cell were investigated experimentally. The experimental results showed that the OCV values depend strongly on the cell orientation, cell temperature, and methanol concentration. The OCV values decrease with an increase in methanol concentration and cell temperature. Also, the OCV values in vertical orientation are lower than the OCV values in other orientations.     

Using a Natural Surfactant for Synthesize of NiO and CuO Nanostructures via Simple and Fast Microwave Approach

NiO and CuO nanostructures were synthesized successfully via simple and fast microwave approach. Olive oil was chose as surfactant for stabilizing nanostructures. Different parameters such as microwave time and power and olive oil concentration were investigated on product size and morphology. The products were characterized with X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry analysis.     

Application of chromium‐doped fullerene as a carrier for thymine and uracil nucleotides: Comprehensive density functional theory calculations

The interactions of the nucleobases thymine (C₅H₆N₂O₂) and uracil (C₄H₄N₂O₂) with Cr‐doped C₂₀ fullerene (C₁₉Cr) are investigated by performing density functional theory calculations. The adsorption of these nucleobases on C₁₉Cr leads to two distinct geometries (P1 and P2) differing in the orientation of the nucleobases. The interaction of the nucleobases with the C₁₉Cr nanocluster is highly exothermic, revealing that they are chemically adsorbed on C₁₉Cr. The results show that the binding energy of the thymine–C₁₉Cr complex is slightly higher than that of the uracil–C₁₉Cr complex. In addition, the P2 geometry is more stable compared to P1 due to the higher binding energy in the former configuration. However, based on the results of natural bond orbital and frontier molecular orbitals analyses, the C₁₉Cr nanocage has higher reactivity with the nucleobases in P1 geometry in comparison with P2 due to the larger charge transfer and orbital hybridization in the former geometry. Moreover, the band gap of the C₁₉Cr nanocage decreases after interaction with the nucleobases, and interestingly the impact is more pronounced for P1 geometry, confirming the higher sensitivity of C₁₉Cr to the nucleobases in P1 geometry. Our findings reveal the promising potential of C₁₉Cr as an organometallic carrier for nucleobases thymine and uracil.     

One‐pot green synthesis of Cu/bone nanocomposite and its catalytic activity in the synthesis of 1‐substituted 1H‐1,2,3,4‐tetrazoles and reduction of hazardous pollutants

In this work, a simple and green method is reported for the biosynthesis of Cu/bone nanocomposite using Cordyline fruticosa extract as a stabilizer and reductant. Animal bone was used as a natural support to prevent the accumulation of Cu nanoparticles. The catalytic activity of Cu/bone nanocomposite was assessed in the synthesis of 1‐substituted 1H‐1,2,3,4‐tetrazoles and reduction of various organic dyes, including 4‐nitrophenol (4‐NP), nigrosin (NS), congo red (CR) and methylene blue (MB). The best catalytic performance in the synthesis of 1‐substituted tetrazoles was achieved using 0.05 g of Cu/bone nanocomposite at 120°C. In addition, under optimal conditions, the absorption bands corresponding to 4‐NP, CR, NS and MB completely disappeared after about 6 min, 3 min, 50 s and 7 s, respectively. The biosynthesis protocol used in the preparation of Cu/bone nanocomposite offers a very attractive area for further research.     

Preparation and characterization of Cu (II) Schiff base complex functionalized boehmite nanoparticles and its application as an effective catalyst for oxidation of sulfides and thiols

The synthesis, characterization, and evaluation of a Schiff base Cu (II) complex functionalized boehmite nanoparticles (Cu-complex-boehmite) as a new catalyst for oxidation of sulfides and thiols in the presence of hydrogen peroxide with complete selectivity and high conversion under solvent-free and mild reaction conditions were reported. Characterization of the catalyst was performed with various physicochemical methods. This effective catalyst was evaluated in terms of activity and reusability. It indicated high catalytic activity, good recoverability and reusability, and supplied the corresponding products in high yields and short reaction times. In addition, it shows notable advantages such as simplicity of operation, heterogeneous nature, easy work up, and it could be used at least eight times with no significant loss of its activity.     

Synthesis,characterization and application of 3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate as nanostructured catalyst for the tandem reaction of β‐naphthol with aromatic aldehydes and amide derivatives

3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate {[Msim]FeCl₄} was prepared and fully characterized by fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX) and vibrating sample magnetometer (VSM) and used, as an efficient catalyst, for the tandem reaction of β‐naphthol with aromatic aldehydes and benzamide at 110 °C under solvent‐free conditions to give 1‐amidoalkyl‐2‐naphthols in high yields and very short reaction times.