Epitaxial growth of Dy2O3 thin films on epitaxial Dy-germanide films on Ge(0 0 1) substrates

Ultra-thin films of Dy are grown on Ge(0 0 1) substrates by molecular beam deposition near room temperature and immediately annealed for solid phase epitaxy at higher temperatures, leading to the formation of DyGe_x films. Thin films of Dy₂O₃ are grown on the DyGe_x film on Ge(0 0 1) substrates by molecular beam epitaxy. Streaky reflection high energy electron diffraction (RHEED) patterns reveal that epitaxial DyGe_x films grow on Ge(0 0 1) substrates with flat surfaces. X-ray diffraction (XRD) spectrum suggests the growth of an orthorhombic phase of DyGe_x films with (0 0 1) orientations. After the growth of Dy₂O₃ films, there is a change in RHEED patterns to spotty features, revealing the growth of 3D crystalline islands. XRD spectrum shows the presence of a cubic phase with (1 0 0) and (1 1 1) orientations. Atomic force microscopy image shows that the surface morphology of Dy₂O₃ films is smooth with a root mean square roughness of 10 Å.     

A three-axis vibration isolation system using modified zero-power controller with parallel mechanism technique

This paper proposes a module-type three-degree-of-freedom vibration isolation system using modified zero-power control. Three vibration isolation modules are connected together using parallel mechanism to control 3-DOF motions. Each module consists of a common base, an individual middle mass and a common isolation table. The base to the middle mass is suspended by positive springs generated by active and passive system, and the middle mass and the isolation table is connected by negative spring realized by active-type modified zero-power control. The developed system could realize zero-compliance to direct disturbances as well as good ground vibration isolation. Furthermore, the isolation table is supported by a weight support mechanism for supporting heavy payloads. In the previous research, a concentrated middle mass with redundant actuators, in the vertical and horizontal directions, were used. Therefore, a vibration isolation system is proposed in this work using modular concept to overcome those drawbacks. Each module is controlled separately by decentralized control technique, and three modules can be used for three-degree-of-freedom of motion control. Therefore, no redundancy of actuator is occurred. Moreover, an improved zero-power controller is presented that can adjust negative stiffness instead of conventional zero-power controller. The results obtained from analytical and experimental studies show that the modular technique is reliable and efficient approach to vibration control, and represents a suitable alternative to the conventional active vibration isolation systems.     

Purification,Characterization and N‐terminal Sequence Analysis of Betel Leaf (Piper betle) Invertase

The present study is the first report describing the purification, enzymatic properties and N‐terminal amino acid sequence of a native invertase in betel leaf. The invertase was purified as a monomeric glycoprotein of molecular mass (Mr) 68 kDa. The enzyme was capable to attack β‐fructofuranoside linkages from the fructose end of sucrose, raffinose and stachyose indicating it as an authentic β‐D‐fructofuranosidase with high specificity for sucrose (Km 4.83 mM). The maximum activity was detected at pH 5.2 and 37 °C. Glucose and fructose showed typical inhibitory effect on the enzyme activity where as lectin was found to be effective activators of the enzyme. Significant inhibition by heavy metal ion Hg²⁺ and sulfhydryl group modifying agents suggesting that free sulfhydryl group containing amino acid, cysteine is necessary for the catalytic activity of the invertase. A BLAST search of the N‐terminal amino acid sequence of betel leaf invertase showed significant homology with the homologous invertases in database.     

Functional 2-benzyl-1,2-dihydro[60]fullerenes as acceptors for organic photovoltaics: facile synthesis and high photovoltaic performances

A new series of functional 2-benzyl-1,2-dihydro[60]fullerenes, BnHCs, were synthesized efficiently via co-catalyzed selective monofunctionalization of C₆₀ with functional benzyl bromides. Photophysical and electrochemical properties of the new BnHCs were investigated. PSCs based on 2-MeO–4-CO₂Me–BnHC as new acceptor and P3HT as donor showed a power conversion efficiency of 3.75%, which is comparable to that of PC₆₁BM under the same device conditions.     

Synthesis of 4-Methylene-1,3-naphthoxazines by the Reaction of Imines with Triphosgene

Reaction of 2-acetyl-1-naphthol with aliphatic amines under microwave irradiation gave the corresponding imines (Schiff bases), which were treated with triphosgene to give 4-methylene-1,3-naphthoxazines in good yields.

Nickel(II) chloride hexahydrate catalyzed reaction of aromatic aldehydes with 2-mercaptoethanol: formation of supramolecular helical assemblage of the product

Various aromatic aldehydes on reaction with 2-mercaptoethanol provided an unanticipated product, bis(2-hydroxyethyl)dithioacetals (3) as the major product along with the expected product 1,3-oxathiolanes (4) in the presence of 0.05 equiv amount of nickel(II) chloride hexahydrate (NiCl₂·6H₂O) under solvent-free conditions. Products 3c and 3e exhibit an interesting hydrogen-bonded infinite supra-molecular helical structure.     

Study of the Cloud Point of the Phenothiazine Drug Chlorpromazine Hydrochloride: Effect of Surfactants and Polymers

Surfactants/polymers are used extensively in drug delivery as drug carriers. We herein report the effect of surfactants and polymers on the cloud point (CP) of amphiphilic drug chlorpromazine hydrochloride. At fixed drug concentration (50 mM) and pH (6.7) these additives affect the CP in accordance to their nature and structure: anionic surfactants show an increase followed by a decrease, whereas cationic (conventional as well as gemini) and nonionic surfactants show continous increase. The behavior with polymers is dictated by the number of units present in a particular polymer. Increase in drug concentration and pH, in presence of fixed amounts of CTAB, increases and decreases the CP, respectively. Variation of CP with pH at various fixed gemini concentrations shows that gemini surfactants are better candidates for drug delivery.     

A New Trend on Biosensor for Neurotransmitter Choline/Acetylcholine—an Overview

Technology always has been an indispensible part in the development of biosensors. The performance of biosensors is being tremendously improved using new materials as transducer as well as binding material in their construction. The use of new materials allowed innovation on transduction technology in biosensor preparations. Because of the submicron dimensions of these sensors, simple and rapid analyses in vitro as well as in vivo are now possible. Portable instruments capable of analysing multiple components are becoming available, too. Sensors that provide excellent temporal and spatial resolution for in vivo monitoring such as for measurement of neurotransmitters have become prominent. The interest to improve the stability, sensitivity and selectivity of the sensors is paramount. This study tries to give an overview of the present status of the material-based biosensor design and new generation of choline/acetylcholine neurotransmitter biosensors.     

Dynamics of PEGylated–Dextran–Spermine Nanoparticles for Gene Delivery to Leukemic Cells

Leukemic cells are hard-to-transfect cell lines. Many transfection reagents which can provide high gene transfer efficiency in common adherent cell lines are not effective to transfect established blood cell lines or primary leukemic cells. This study aims to examine a new class of cationic polymer non-viral vector, PEGylated–dextran–spermine (PEG-D-SPM), to determine its ability to transfect the leukemic cells. Here, the optimal conditions of the complex preparation (PEG-D-SPM/plasmid DNA (pDNA)) were examined. Different weight-mixing (w/w) ratios of PEG-D-SPM/pDNA complex were prepared to obtain an ideal mixing ratio to protect encapsulated pDNA from DNase degradation and to determine the optimal transfection efficiency of the complex. Strong complexation between polymer and pDNA in agarose gel electrophoresis and protection of pDNA from DNase were detected at ratios from 25 to 15. Highest gene expression was detected at w/w ratio of 18 in HL60 and K562 cells. However, gene expression from both leukemic cell lines was lower than the control MCF-7 cells. The cytotoxicity of PEG-D-SPM/pDNA complex at the most optimal mixing ratios was tested in HL60 and K562 cells using MTS assay and the results showed that the PEG-D-SPM/pDNA complex had no cytotoxic effect on these cell lines. Spherical shape and nano-nature of PEG-D-SPM/pDNA complex at ratio 18 was observed using transmission electron microscopy. As PEG-D-SPM showed modest transfection efficiency in the leukemic cell lines, we conclude that further work is needed to improve the delivery efficiency of the PEG-D-SPM.     

Fluorescent Dye Conjugates of Rabbit Arylsulfatase A as a Biological Tracer for Protein Endocytosis

Fluorescent dye conjugates of arylsulfatase A (ASA) from rabbit liver were prepared at pH 9.0 in 0.1 M sodium bicarbonate buffer. The modification of amino or sulphadryl groups by dichlorotriazinylamino-fluorescein or Lucifer yellow fluorescent dyes did not alter the characteristic features of the enzyme molecule such as enzyme activity, dimerization of the protein molecule at pH 4.5 and anomalous kinetics of the native enzyme. The fluorescence intensity of the Lucifer yellow enzyme conjugates were quenched when the pH of the protein solution was changed from pH 7.5 to 4.5. Therefore, the Lucifer yellow enzyme conjugate can be used to study the kinetics of pH-dependent association and dissociation of the ASA. Availability of such fluorescent dyes conjugates of ASA or other lysosomal enzyme may be used as a biological tracer to study the receptor dependent endocytosis of enzyme molecules.