Identification of extracellular nanoparticle subsets by nuclear magnetic resonance

Exosomes are a subset of secreted lipid envelope-encapsulated extracellular vesicles (EVs) of 50–150 nm diameter that can transfer cargo from donor to acceptor cells. In the current purification protocols of exosomes, many smaller and larger nanoparticles such as lipoproteins, exomers and microvesicles are typically co-isolated as well. Particle size distribution is one important characteristics of EV samples, as it reflects the cellular origin of EVs and the purity of the isolation. However, most of the physicochemical analytical methods today cannot illustrate the smallest exosomes and other small particles like the exomers. Here, we demonstrate that diffusion ordered spectroscopy (DOSY) nuclear magnetic resonance (NMR) method enables the determination of a very broad distribution of extracellular nanoparticles, ranging from 1 to 500 nm. The range covers sizes of all particles included in EV samples after isolation. The method is non-invasive, as it does not require any labelling or other chemical modification. We investigated EVs secreted from milk as well as embryonic kidney and renal carcinoma cells. Western blot analysis and immuno-electron microscopy confirmed expression of exosomal markers such as ALIX, TSG101, CD81, CD9, and CD63 in the EV samples. In addition to the larger particles observed by nanoparticle tracking analysis (NTA) in the range of 70–500 nm, the DOSY distributions include a significant number of smaller particles in the range of 10–70 nm, which are visible also in transmission electron microscopy images but invisible in NTA. Furthermore, we demonstrate that hyperpolarized chemical exchange saturation transfer (Hyper-CEST) with ¹²⁹Xe NMR indicates also the existence of smaller and larger nanoparticles in the EV samples, providing also additional support for DOSY results. The method implies also that the Xe exchange is significantly faster in the EV pool than in the lipoprotein/exomer pool.

Diffusion and xenon NMR based methods to determine a very broad range of sizes and sub-sets of extracellular vesicles.     

Electrochemical Biosensor Design with Multi-walled Carbon Nanotube to Display DNA-Schiff Base Interaction

This paper demonstrates a Schiff base i. e. 5-(diethylamino)-2-((2,6-diethylphenylimino)methyl)phenol (5-DDMP) that was sensed by DNA biosensor. dsDNA was immobilized onto GCE modified with functionalized multi-walled carbon nanotubes to prepare a biosensor. The efficiency of dsDNA biosensor was determined and binding of 5-DDMP with dsDNA was searched by UV-vis spectrophotometry and differential pulse voltammetry. Molecular docking simulations between 5-DDMP and dsDNA were explored and as a result, a hydrogen bond and a π-π contact were observed between 5-DDMP and deoxyguanosine base (dG22) of the strand B, deoxyadenosine base (dA5) of the strand A, respectively. These studies could be useful for new anticancer drug design and development.     

Transamidation of Amides and Amidation of Esters by Selective N–C(O)/O–C(O) Cleavage Mediated by Air- and Moisture-Stable Half-Sandwich Nickel(II)–NHC Complexes

The formation of amide bonds represents one of the most fundamental processes in organic synthesis. Transition-metal-catalyzed activation of acyclic twisted amides has emerged as an increasingly powerful platform in synthesis. Herein, we report the transamidation of N-activated twisted amides by selective N–C(O) cleavage mediated by air- and moisture-stable half-sandwich Ni(II)–NHC (NHC = N-heterocyclic carbenes) complexes. We demonstrate that the readily available cyclopentadienyl complex, [CpNi(IPr)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), promotes highly selective transamidation of the N–C(O) bond in twisted N-Boc amides with non-nucleophilic anilines. The reaction provides access to secondary anilides via the non-conventional amide bond-forming pathway. Furthermore, the amidation of activated phenolic and unactivated methyl esters mediated by [CpNi(IPr)Cl] is reported. This study sets the stage for the broad utilization of well-defined, air- and moisture-stable Ni(II)–NHC complexes in catalytic amide bond-forming protocols by unconventional C(acyl)–N and C(acyl)–O bond cleavage reactions.     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

Isolation,characterization, and quantification of curcuminoids and their comparative effects in cerebral ischemia

The study reports a rapid and short analytical technique for separation, characterization, and quantitation along with comparative pharmacological effect of curcuminoids in cerebral ischemia. Flash chromatography, using silica and diol columns along with gradient mobile phase, was utilized to separate three curcuminoids, i.e., curcumin (Cur), demethoxycurcumin (DMC), and bisdemethoxycurcumin (BDMC) for the first time. The separated peaks were monitored at 200–360?nm, whereas the purity of compounds (96.2–97.6%) was determined through qualitative analysis such as infrared and ¹H and ¹³C-nuclear magnetic resonance spectroscopy, mass spectrometry (MS), and differential scanning calorimetry. Furthermore, chitosan nanoparticles (CS-NPs) for curcuminoids were prepared and characterized through zeta sizer, zeta potential, scanning electron microscopy, and transmission electron microscopy. The developed ultra performance of liquid chromatography-electrospray ionization-quadrupole-time of flight-mass spectrometry/mass spectrometry (UPLC-ESI-Q-TOF-MS/MS) method showed simplified automation and shorter run time for Combi flash over conventional separation techniques. The CS-NPs for all the three curcuminoids and combined-curcuminoids (CCr) (combined and administered together for a synergistic effect), following intranasal administration in middle cerebral artery–occluded rats were evaluated for grip strength, locomotor activity, and histopathological examination where the anti-ischemic activity was observed, in terms of potency, for all three CS-NPs and CCr as CCr>Cur>DMC>>BDMC. Cur-CS-NPs exhibited more potency among Cur, DMC, and BDMC, whereas CCr was the more potent anti-ischemic drug compared to Cur, DMC, and BDMC. For Cur the characteristic activity is proposed because of the presence of methoxy group on the phenyl ring whereas for CCr it is synergistic effect of curcuminoids.     

Stability-indicating RP-HPLC method for simultaneous quantitation of tramadol and aceclofenac in presence of their major degradation products: Method development and validation

Primary objective of this study was to develop a stability-indicating reverse-phase high-performance liquid chromatography (HPLC) method for simultaneous quantitation of tramadol and aceclofenac in presence of their degradation products. The drugs were subjected to various International Conference on Harmonization recommended stress conditions, such as acid hydrolysis, alkaline hydrolysis, peroxide oxidation, thermolysis, and photolysis. The major degradation products got well resoluted from the analytes in HPLC analysis with a mobile phase composed of a mixture of 0.01?M ammonium acetate buffer (pH 6.5) and acetonitrile (65:35, v/v) through a Phenomenex Gemini C18 (250?mm?×?4.6?mm, 5?µm particle size) column. The method was linear over a range of 15–60?µg/mL for tramadol and 40–160?µg/mL for aceclofenac concentration. The analytes were detected at a wavelength of 270?nm. The method was validated and found to be specific, accurate, precise, stable, and robust for its intended use. The method can be recommended for its future use in routine quality control, accelerated and real-time stability analysis of the formulations containing tramadol and aceclofenac combination.     

3D Printable Geopolymer Composites Reinforced with Carbon-Based Nanomaterials – A Review

Three-dimensional (3D) geopolymer printing (3DGP) technology is a rapidly evolving digital fabrication method used in the construction industry. This technology offers significant benefits over 3D concrete printing in terms of energy saving and reduced carbon emissions, thus promoting sustainability. 3DGP technology is still evolving, and researchers are striving to develop high-performance printable materials and different methods to improve its robustness and efficiency. Carbon-based nanomaterials (CBNs) with beneficial properties have a wide range of applications in various fields, including as concrete/geopolymer systems in construction. This paper comprehensively reviews the research progress on carbon-based nanomaterials (CBNs) used to develop extrusion-based 3D geopolymer printing (3DGP) technology, including dispersion techniques, mixing methods, and the materials′ performance. The rheological, mechanical, durability, and other characteristics of these materials are also examined. Furthermore, the existing research limitations and the prospects of using 3DGP technology to produce high-quality composite mixtures are critically evaluated.     

Oxymatrine Loaded Cross-Linked PVA Nanofibrous Scaffold: Design and Characterization and Anticancer Properties

This study focuses on the fabrication, characterization and anticancer properties of biocompatible and biodegradable composite nanofibers consisting of poly(vinyl alcohol) (PVA), oxymatrine (OM), and citric acid (CA) using a facile and high-yield centrifugal spinning process known as Forcespinning. The effects of varying concentrations of OM and CA on fiber diameter and molecular cross-linking are investigated. The morphological and thermo-physical properties, as well as water absorption of the developed nanofiber-based mats are characterized using microscopical analysis, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In vitro anticancer studies are conducted with HCT116 colorectal cancer cells. Results show a high yield of long fibers embedded with beads. Fiber average diameters range between 462 and 528 nm depending on OM concentration. The thermal analysis results show that the fibers are stable at room temperature. The anticancer study reveals that PVA nanofiber membrane with high concentrations of OM can suppress the proliferation of HCT116 colorectal cancer cells. The study provides a comprehensive investigation of OM embedded into nanosized PVA fibers and the prospective application of these membranes as a drug delivery system.     

Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications – A Review

3D concrete printing (3DCP) is an emerging additive manufacturing technology in the construction industry. Its challenges lie in the development of high-performance printable materials and printing processes. Recently developed carbon-based nanomaterials (CBNs) such as graphene, graphene oxide, graphene nanoplatelets, and carbon nanotubes, have various applications due to their exceptional mechanical, chemical, thermal, and electrical characteristics. CBNs also have found potential applications as a concrete ingredient as they enhance the microstructure and modify concrete properties at the molecular level. This paper focuses on state-of-the-art studies on CBNs, 3DCP technology, and CBNs in conventional and 3D printable cement-based composites including CBN dispersion techniques, concrete mixing methods, and fresh and hardened properties of concrete. Furthermore, the current limitations and future perspectives of 3DCP using CBNs to produce high-quality composite mixtures are discussed.     

Synthesis and structural characterisation of a novel tris-methylene bridged compound (NO) 4Fe2 Se(μ-CH2)3

The tris-methylene bridged compound (NO)₄Fe₂Se(μ-CH₂)₃ has been isolated. It has been characterised by IR and ¹H, ¹³C, and ⁷⁷Se NMR spectroscopy. Its structure has been determined by single-crystal X-ray diffraction methods. The structure consists of a heavy atom triangle consisting of one Se and two Fe atoms. The Fe-Fe and the two Fe-Se edges are bridged by methylene groups.