The origin of enhanced photocatalytic decomposition of ATP on TiO2 powders as induced by surface modification with lanthanide ions: important roles of ATP adsorption to the modified surface

Surface modification of TiO₂ powders with lanthanide salts (EuCl₃ or YbCl₃) enhanced photocatalytic decomposition of ATP. In comparison with the unmodified catalyst, a 3-fold increase in the ATP decay rate was observed with TiO₂ powders as prepared in 5 mM EuCl₃ (or YbCl₃) solution. The reason was ascribed to enrichment of ATP to TiO₂ powder with the lanthanide ions. Evidence was obtained by adsorption experiments where ATP concentration was monitored after dispersing TiO₂ powders into the solution. The ATP molecules adsorbed faster to TiO₂ powder and strongly stabilized there in the presence of Yb³⁺ than otherwise.     

Isotope-dependent crystalline phases at ambient temperature: Spectroscopic and calorimetric evidence for a deuteration-induced phase transition at 320 K in α-DCrO2

The heat capacities of HCrO₂ and DCrO₂ have been measured at temperatures between 5 and 360 K. A lambda anomaly occurred at 320 K for DCrO₂ but not for HCrO₂. Infrared spectra were recorded at temperatures between 5 and 405 K. The spectrum of DCrO₂ changed at 320 K with respect to the peak wave-number and splitting of some of the vibrations, while those of HCrO₂ depended smoothly on temperature. These experimental results are discussed in terms of a deuteration-induced phase transition.     

Comprehensive synthesis of ER related high-mannose-type sugar chains by convergent strategy

Systematic synthesis of high-mannose-type sugar chains of asparagine-linked glycoproteins is described. To construct the target sugar chains, we employed the convergent route, using three oligosaccharide components, the common hexasaccharide, branched tri-, tetra- and pentasaccharides, and mono-, di-, and triglucosyl fragments. Construction of the β-mannoside linkage was performed using p-methoxybenzyl-assisted intramolecular aglycon delivery. The hexasaccharide fragment was coupled with the branched mannooligosaccharide donors such as M5, M4B, M4C, and M3 to give undecasaccharide (M9), decasaccharide (M8B and M8C), and nonasaccharide (M7), respectively. Incorporation of mono-, di-, and triglucosyl fragments toward them gave tetradecasaccharide (G3M9), tridecasaccharide (G2M9), dodecasaccharide (G1M9), undecasaccharide (G1M8B and G1M8C), and decasaccharide (G1M7), respectively.     

A new method of constructing dearomatized compounds using triazene

We are reporting on a new method of constructing dearomatized compounds from α-substituted aryltriazenes. Deprotonation occurs at C atom α to N3. Nucleophilic attack of generated anion at the ortho-position of aryl group forms a new carbon-carbon bond. A stereoselective reaction was observed when the substituents on the C α to N3 are tied together in either a pyrrolidine or a piperidine. The product of this reaction possessed an interesting dearomatized tetrahydrobenzotriazine framework.     

Synthesis and structural, electrochemical, and stacking properties of conical molecules possessing buckyferrocene on the apex

A series of conical molecules featuring a [60]fullerene/ferrocene hybrid and five aralkyl side chains (Fe[C60{C6H4-(OCO-C6H3-(OR)2-3,4)-4}5]Cp) have been synthesized and examined for their structural and electrochemical properties as well as their ability to form supramolecular structures in crystals and liquid crystals. When the R group on the side is a methyl group, the compound forms crystals in which the dipolar conical molecules are stacked head-to-tail to form a columnar structure. When the R group is as long as a C18H38 group, the compound forms liquid crystals. Oxidation of the liquid crystalline compound by an aminium salt [(4-BrC6H4)3N][SbCl6] produces the corresponding paramagnetic Fe(III) compound that also exhibits liquid crystalline properties.     

Effect of chemical crosslinking on mechanical and electrical properties of ultrahigh-molecular-weight polyethylene-carbon fiber blends prepared by gelation/crystallization from solutions

In an attempt to improve the mechanical property of polyethylene composite at high temperature, crosslinking of ultrahigh-molecular-weight polyethylene (UHMWPE) and carbon fiber (CF) blends was carried out by using dicumyl peroxide (DCP). The specimens were prepared by gelation/crystallization from solutions. The effect of chemical crosslinking on mechanical and electrical properties of UHMWPE/CF blends with composition of 1/0, 1/0.25, and 1/1 (w/w) were investigated in detail. Electrical conductivity and thermal mechanical properties of the blends with the 1/1 composition were greatly improved by incorporation of enough content of CF and adequate crosslinking network formation. Surprisingly, the Young’s modulus of the 1/1 blend reached 20 GPa at room temperature (20 °C). On the other hand, heat treatment at 135 °C played an important role for obtaining a high PTC effect for the UHMWPE-CF blend in which the PTC intensity reached 10⁷.     

Electric field dependent photocurrent generation in a thin-film organic photovoltaic device with a [70]fullerene-benzodifuranone dyad

A [70]fullerene-benzodifuranone acceptor dyad synthesized by a Ag?-mediated coupling reaction was used to construct a thin-film organic solar cell. The fullerene and the benzodifuranone dye in the dyad have close-lying LUMO levels in the range of 3.7-3.9 eV, so that energy transfer from the dye to the fullerene can take place. A p-n heterojunction photovoltaic device consisting of a tetrabenzoporphyrin and a [70]fullerene-benzodifuranone dyad showed a weak but discernible contribution from light absorption of the dyad to the photocurrent under both a positive and a negative effective bias. These results indicate that the benzodifuranone moiety attached to the acceptor contributes to light-harvesting by energy transfer.     

On-chip fraction collection for multiple selected ssDNA fragments using isolated extraction channels

High efficiency and high-purity fraction collection is highly sought in analysis of fragments-of-interest from selective polymerase chain reaction (PCR) products generated by High Coverage Gene Expression Profiling (HiCEP) methods. Here we demonstrate a new electrophoretic chip device enabling automatic high-efficient fractionation of multiple ssDNA target fragments during a run of separation. We used thoroughly isolated extraction channels for each selected target to reduce the risk of cross-contamination between targets due to cross-talk of extraction channels. Fragments of 35, 108 and 138 b, were successfully isolated, then the recovery was PCR-amplified and assessed by capillary electrophoresis (CE) analysis. Total impurity level of the targets due to unwanted fragments of 0.7%, 2% and 6% respectively, was estimated. Difficulties in collecting multiple target factions are due to band diffusion and DNA adsorption to the walls for the fragments in the separation channel, which is generated by transferring the DNA target fraction from the extraction section to the target reservoir. Therefore, we have carefully measured band broadening and analyzed its influence on the separation resolution due to the delay.     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

The Mukaiyama Aldol Reaction: 40 Years of Continuous Development

A directed cross‐aldol reaction of silyl enol ethers with carbonyl compounds, such as aldehydes and ketones, promoted by a Lewis acid, a reaction which is now widely known as the Mukaiyama aldol reaction. It was first reported in 1973, and this year marks the 40th anniversary. The directed cross‐aldol reactions mediated by boron enolates and tin(II) enolates also emerged from the Mukaiyama laboratory. These directed cross‐aldol reactions have become invaluable tools for the construction of stereochemically complex molecules from two carbonyl compounds. This Minireview provides a succinct historical overview of their discoveries and the early stages of their development.