Motion analysis of two-link nonholonomic swimmers

Nonlinear Dynamics - This paper presents a tool for analyzing the motion of two-link nonholonomic swimmers. We refer to these systems as Land-sharks, which are a generalization of the well known...     

The Reduction of Aromatic Aldehydes and Benzils by Sodium Formaldehyde Sulphoxylate

Sodium formaldehyde sulphoxylate is shown to be an effective reagent for the reduction of some aromatic aldehydes to alcohols. Benzils are also reduced under neutral or basic conditions to give mainly benzoins. Ketones are reduced only slowly.     

Rapid Aqueous Borohydride Reduction of Carbonyls Under Sealed-Tube Microwave Conditions

Ketones and aldehydes are conveniently and rapidly reduced to the corresponding alcohols in good yields using sodium borohydride under sealed-tube microwave conditions in either 95% ethanol or water. In purely aqueous systems, highly aliphatic substrates are sluggish, but this can be overcome by introducing sodium dodecyl sulfate (SDS) at the critical micelle concentration. With a 2:1 substrate/borohydride ratio and a reaction temperature of 100 °C, reduction is typically complete within 1 min in 95% ethanol and 5 min in water/SDS. The methodology is well suited for parallel and combinatorial synthetic approaches.     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

The sonochemical coating of cotton withstands 65 washing cycles at hospital washing standards and retains its antibacterial properties

Hospital-acquired nosocomial infections are a major health, and consequently financial issue, in the world healthcare system. The problem of bacterial infections in general, and in hospitals in particular, has led to extensive scientific and industrial efforts to fabricate antibacterial textiles. A sonochemical coating machine was developed and built and its ability to coat antibacterial nanoparticles (NPs) onto 40–50 meter length of materials on a roll to roll basis at a speed of 22 cm/min. Cotton coated sonochemically with copper oxide nanoparticles (CuO NPs) was found to maintain its antibacterial properties even after 65 cycles of washings according to hospital protocols of hygienic washing (75 °C). This demonstrates the good quality and high stability of this sonochemically produced NPs coating on textiles. Durable antibacterial textiles such as these may be suitable for wide spread use in future hospital environments where hygiene control is of paramount importance.     

Reversibly self-assembled pH-responsive PEG-p(CL-g-TMC) polymersomes

Polymersomes have gained much interest within the biomedical field as drug delivery systems due to their ability to transport and protect cargo from the harsh environment inside the body. For an improved drug efficacy, control over cargo release is however also an important factor to take into account. An often employed method is to incorporate pH sensitive groups in the vesicle membrane, which induce disassembly and content release when the particles have reached a target site in the body with the appropriate pH, such as the acidic microenvironment of tumor tissue or the endosome. In this paper, biodegradable poly(ethylene glycol)-poly(caprolactone-gradient-trimethylene carbonate)-based polymeric vesicles have been developed with disassembly features at mild acidic conditions. Modifying the polymer backbone with imidazole moieties results in vesicle disassembly upon protonation due to the lowered pH. Furthermore, upon increasing the pH efficient re-assembly into vesicles is observed due to the switchable amphiphilic nature of the polymer. When this re-assembly process is conducted in presence of cargo, enhanced encapsulation is achieved. Furthermore, the potency of the polymeric system for future biomedical applications such as adjuvant delivery is demonstrated.     

X-Ray Crystallography and Free Energy Calculations Reveal the Binding Mechanism of A2A Adenosine Receptor Antagonists

We present a robust protocol based on iterations of free energy perturbation (FEP) calculations, chemical synthesis, biophysical mapping and X-ray crystallography to reveal the binding mode of an antagonist series to the A_2A adenosine receptor (AR). Eight A_2AAR binding site mutations from biophysical mapping experiments were initially analyzed with sidechain FEP simulations, performed on alternate binding modes. The results distinctively supported one binding mode, which was subsequently used to design new chromone derivatives. Their affinities for the A_2AAR were experimentally determined and investigated through a cycle of ligand-FEP calculations, validating the binding orientation of the different chemical substituents proposed. Subsequent X-ray crystallography of the A_2AAR with a low and a high affinity chromone derivative confirmed the predicted binding orientation. The new molecules and structures here reported were driven by free energy calculations, and provide new insights on antagonist binding to the A_2AAR, an emerging target in immuno-oncology.