Bulk terminated NaCl(111) on aluminum: a polar surface of an ionic crystal?

Atomically resolved scanning tunneling microscopy reveals the existence of triangular (111) bulk terminated NaCl islands. The islands can be grown by subsequent adsorption of Na and Cl2 on Al(111) and Al(100) or by conversion of stoichiometric NaCl(100) islands to NaCl(111) via additional Na adsorption. The NaCl(111) islands have Na-Cl-Na sandwich structure. Ab initio calculations of the electronic structure of these islands show that each of the Na atoms carries half a positive elementary charge, leaving the islands neutral and explaining the existence of an otherwise unstable surface.     

The elusive structure of CrCl(2): a combined computational and gas-phase electron-diffraction study

Chromium dichloride poses a challenge to the structural chemist. Its different forms of aggregation and association display all well-known structural distortions induced by vibronic interactions. The monomeric molecule has a Renner-Teller distorted bent geometry, the crystal exhibits strong Jahn-Teller distortion, and the oligomers have slightly distorted four-membered-ring structures due to the pseudo-Jahn-Teller effect. In this paper we report on the low-energy structures of the monomer and its clusters, Cr(2)Cl(4), Cr(3)Cl(6), and Cr(4)Cl(8), from unrestricted Kohn-Sham (broken-symmetry) density functional calculations. CrCl(2) was also investigated at higher level, including coupled-cluster and state-average CASSCF computations. The global minima of the gas-phase clusters consist of two-dimensional, antiferromagnetically coupled chains of CrCl(2) units forming four-membered, doubly bridged Cr(2)Cl(2) rings, closely resembling the solid-state structure of alpha-CrCl(2). Each Cr atom in these chains has spin quantum number S=2. This suggests that the CrCl(2) nucleation starts very early on the structural chain motif found in the solid. There is only a very small change in energy from the antiferromagnetically to the ferromagnetically coupled Cr atoms, which indicates little spin-coupling between the metal centers. There is an approximately constant change in energy, about 50 kcal mol(-1), with every new CrCl(2) unit during cluster formation. Information about the structure of these clusters was used in the re-analysis of high-temperature electron-diffraction data. The vapor at 1170 K contained about 77 % monomeric molecules, 19 % dimers, and a small amount of trimers. Monomeric CrCl(2) was found to be bent with a bond angle of 149(10) degrees, in good agreement with our computations, which resulted in a Renner-Teller distortion of the lowest-energy (5)Pi(g) electronic state into the bent (5)B(2) ground state. The vibrational spectrum of chromium dichloride is discussed and the thermodynamics of cluster formation from 1000-2000 K is examined.     

Solution-phase parallel synthesis of a pyridinium pyrazol-3-olate inner salt library using a three-component reaction

We present here the discovery of a novel, versatile, multicomponent reaction leading to various 4-[4-(pyridinium-1-yl)-2,5-dioxo-2,5-dihydro-1H-pyrrol-3-yl]-2H-pyrazol-3-olate inner salts. The structure of the unusual zwitterionic inner salts was elucidated, and the scope of the novel reaction was investigated. After rapid optimization, the reaction was adapted to parallel synthesis, and an 800-membered compound library was produced.     

Grid-free density functional calculations on periodic systems

Density fitting scheme is applied to the exchange part of the Kohn-Sham potential matrix in a grid-free local density approximation for infinite systems with translational periodicity. It is shown that within this approach the computational demands for the exchange part scale in the same way as for the Coulomb part. The efficiency of the scheme is demonstrated on a model infinite polymer chain. For simplicity, the implementation with Dirac-Slater Xalpha exchange functional is presented only. Several choices of auxiliary basis set expansion coefficients were tested with both Coulomb and overlap metric. Their effectiveness is discussed also in terms of robustness and norm preservation.     

Influence of impurities on localized transition metal surface states: scanning tunneling spectroscopy on V(001)

The first scanning tunneling spectroscopy measurements on V(001) are reported. A strong surface state is detected which is very sensitive to the presence of segregated carbon impurities. The surface state energy shifts from 0.03 eV below the Fermi level at clean areas towards higher energies (up to approximately 0.2 eV) at contaminated areas. Because of the negative dispersion of this state, the upward shift cannot be described in a simple confinement picture. Rather, the surface state energy is governed by vanadium surface s- d interactions which are altered by carbon coverage.     

Thermal oxidation of cellulose investigated by chemiluminescence. The effect of magnesium and calcium carbonates and of different pHs

Whatman cellulose impregnated with calcium and magnesium carbonates was oxidized and chemiluminescence accompanying this oxidation has been measured. It was shown that magnesium ions in deacidified cellulose pulp promote the light emission significantly. On the other hand, acid papers give the more pronounced light signals at temperatures close to ambient. The relation between chemiluminescence runs and paper degradation has been implicated, with an attempt to extrapolate half-lives of paper samples to conditions close to ambient. To cite this article: J. Rychlý et al., C. R. Chimie 9 (2006).     

Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials

To substitute cross-linked photopolymers in rapid prototyping of mold materials and therefore extend the range of materials which can be casted, organo-soluble photopolymers were developed. Branched bisalkylacrylamides were suitable as base component for such formulations, due to their high reactivity, good mechanical properties, and excellent solubility of the formed polymers. These molding materials were used to prepare cellular biocompatible materials which could be used as bone replacement materials. Biocompatible crosslinkers based on methacrylates from hydrolyzed gelatine or lactic acid ethyleneglycol blockcopolymers and commercially available reactive diluents are the base components of such a formulation. Biocompatibility was investigated by osteoblast-like cells. Cellular biocompatible parts were obtained by thermal polymerization in soluble mould materials prepared by 3D-photoshaping.     

Need and use of reference materials in a comprehensive countrywide monitoring of radionuclides

The reliability of measurement results is essential for forming a common database of a laboratory network, because a well-maintained and consistent database is the crucial point of countrywide monitoring. Reference materials are important tools in realizing some aspects of quality assurance; they are especially useful in harmonizing work within the network. Among usual types of reference materials in radio analytics solutions, matrix reference materials and some special reference objects are used. All classes of reference materials should be used depending on the purpose of the demonstration of quality, even in-house reference materials. Interlaboratory measurement comparison and performance evaluation programs play important quality assurance role in radio analytical laboratories. Fortunately, nowadays, the main task is to determine a very low radioactivity concentration in the environment; therefore, pre-concentration is necessary. Generally, the radionuclide bearing natural materials collected from sites where there had been sufficient time for natural processes to redistribute various chemically different species of radionuclides are more reliable reference materials than spiked materials—the main difference is the chemical bounding which is crucial from the point of view of the bioavailability. The need of reference material is summarized according to the intended use, like quality control, measurement validation, and instrument calibration.     

β-Crystallisation tendency and structure of polypropylene grafted by maleic anhydride and its blends with isotactic polypropylene

Crystallization, melting and structure of three different commercial types of isotactic polypropylene (iPP) grafted by maleic anhydride (PP-g-MAH) with different maleic anhydride content (AC) and their β-nucleated versions were studied by X-ray diffractometry (WAXS), differential scanning calorimetry (DSC), polarised light microscopy (PLM) and scanning electron microscopy (SEM). The presence of maleic anhydride units disturbs the chain regularity, hereby decreases the crystallization tendency of iPP in general and the β-crystallisation ability in particular. β-modification of iPP (β-iPP) forms only in β-nucleated PP-g-MAH polymers studied if the anhydride content is not larger than 0.5 mass%. The influence of AC of PP-g-MAH on the feature the spherulitic structure is demonstrated by PLM and SEM micrographs. The β-nucleated iPP/PP-g-MAH blends containing 10 mass% PP-g-MAH crystallise predominantly in β-form independently of AC of the latter. The β-nuceated blends of iPP and PP-g-MAH with lowest AC crystallise in β-form in whole concentration range. The interaction parameter between iPP and PP-g-MAH polymers calculated by Nishi-Wang equation indicate limited interaction between the components.