Light‐Emitting Paper

A solution‐based fabrication of flexible and light‐weight light‐emitting devices on paper substrates is reported. Two different types of paper substrates are coated with a surface‐emitting light‐emitting electrochemical cell (LEC) device: a multilayer‐coated specialty paper with an intermediate surface roughness of 0.4 μm and a low‐end and low‐cost copy paper with a large surface roughness of 5 μm. The entire device fabrication is executed using a handheld airbrush, and it is notable that all of the constituent layers are deposited from solution under ambient air. The top‐emitting paper‐LECs are highly flexible, and display a uniform light emission with a luminance of 200 cd m^?2 at a current conversion efficacy of 1.4 cd A^?1.     

Substrate role in coating of microfibrillated cellulose suspensions

Interest in nanocellulose-based coatings for packaging applications has been growing due to their excellent oil and gas barrier properties combined with their sustainable, recyclable, biodegradable, and non-toxic nature. Coating of nanocellulose materials such as microfibrillated cellulose (MFC) on paper/paperboard is challenging compared to traditional paper coating materials due to excessively high viscosity and yield stress of MFC suspensions at rather low solids content, typically below 5%. Possessing large amounts of water and a distinct rheological behavior such suspensions set tough demands on the substrate to be coated. It is important to understand and quantify substrate requirements in order to coat these suspensions successfully and achieve a satisfactory coating quality. A custom-built slot geometry is used herein to enable coating of highly viscous MFC suspensions on different paper-based substrates in a roll-to-roll process. The impact of substrate properties, such as surface chemistry and surface energy, surface roughness and surface porosity, and water absorption capacity on MFC coatability and coating quality is reported. Coating adhesion to the substrate was quantified with surface strength testing of MFC coated substrates. Various techniques, such as Scanning Electron Microscopy, IGT print penetration tests, and air permeability tests were employed for measuring coating coverage and surface porosity. MFC coating was found to adhere best to a highly hydrophilic surface, whereas the most uniform and defect-free film at low coat weights was formed on a smooth surface. It was also found that the MFC coat weight needed for full coverage, and therefore potentially good barrier, needs to exceed the surface roughness volume of the substrate. Water absorption capacity of the substrate also determines the final MFC coating quality obtained. The results clearly highlight the role of paper-based substrate for successful and effective coating of the micro and nanocellulose suspension.     

Benefits of Partitioning in a Projection-based and Realizable Model-order Reduction Flow

Model-order reduction (MOR) is a typical approach to speed up the post-layout verification simulation step in circuit design. This paper studies the benefits of using circuit partitioning in a complete MOR flow. First, an efficient reduction algorithm package comprising of partitioning, reduction, and realization parts is presented. The reduction flow is then discussed using theoretical analysis and simulations from an array of 65-nm technology node interconnect circuits. It is shown that the reduction efficiency and computational costs quickly worsen with increased circuit size when using a direct projection-based MOR approach. In contrast, by using partitioning, the MOR can retain the scalability of the reduction problem, being computationally lighter and more efficient even with larger circuits. In addition, using partitioning may improve the robustness of the MOR flow in cases with circuits with many ports or sensitive verification simulations.     

Detection of Sea Surface Temperature (SST) Using Infrared Band Data of Advanced Very High Resolution Radiometer (AVHRR) in the Gulf of Finland

This paper presents the detection of sea surface temperature (SST) in the Gulf of Finland using infrared band data of Advanced Very High Resolution Radiometer (AVHRR). AVHRR imagery is evaluated as a main data source for monitoring SST as a measure of upwelling's dynamic. Sea surface effects (SSE), however, cause a temperature difference between the sea surface skin and water below the surface. Therefore, SSE is taken into account as one of the major error factors in the SST esimation. Further studies will be investigated using both AVHRR and MODIS in the future.     

Palladium(II) Complexes with the Mixed‐Donor Ligand CH3S‐(CH2)3‐PPh2 Crystal Structures of [PdCl2{CH3S‐(CH2)3‐PPh2}n](n = 1, 2)

The phosphorus‐sulfur ligand 1‐(methylthio)‐3‐(diphenylphosphino)‐propane (S‐P3) has been synthesized and characterized by ¹H NMR and ¹³C NMR. Reactions of S‐P3 with [PdCl₂(PhCN)₂] afforded the complexes [PdCl₂(S‐P3)] ( I ) and [PdCl₂(S‐P3)₂] ( II ), in which S‐P3 acts as a bidentate and monodentate ligand, respectively. Compound I crystallizes in monoclinic space group P2₁/n (No. 14) with cell dimensions: a = 8.589(3), b = 15.051(3), c = 17.100(3)Å, β = 102.91(2)°, V = 2154.7(9)ų, Z = 4. Likewise, compound II crystallizes in monoclinic space group P2₁/n (No. 14) with a = 9.993(5), b = 8.613(4), c = 18.721(5)Å, β = 90.18(3)°, V = 1611.3(12)ų, Z = 2. Compound II has a trans square planar configuration with only the P‐site of the ligand bonded to the palladium atom.     

On the origin of residual dipolar couplings from denatured proteins

Effects of steric obstruction on random flight chains are examined. Spatial probability distributions are elaborated to calculate residual dipolar couplings and residual chemical shift anisotropy, parameters that are acquired by NMR spectroscopy from solutes dissolved in dilute liquid crystals. Calculations yield chain length and residue position-dependent values in good agreement with simulations to provide understanding of recently acquired data from denatured proteins.