Solid products and rate-limiting step in the thermal half decomposition of natural dolomite in a CO2 (g) atmosphere

Natural dolomite powders obtained from caves which give unusual high resistance building materials, have been decomposed in a Knudsen cell at high CO₂ pressures in the temperature range of 913-973 K. XRD traces for the final solid products, after the first half thermal decomposition, have shown, that beside the XRD patterns for the calcite and MgO, the existence of a new structure with major peaks at 2θ equal to 38.5 and 65°. This finding has been ascribed to a solid solution of MgO in calcite. The kinetic analysis of the TG curves yield a total apparent enthalpy (ΔH^∗) for the decomposition equal to 440±10 kJ mol⁻¹ for a range of fraction decomposed (α) varying between 0.2 and 0.7. This value is much closer to the theoretical expected at 950 K value ΔH=486 kJ mol⁻¹ for the dolomite decomposition in CO₂ environment, where CaO, MgO and oxides of solid solution can be the solid reaction products. The rate determining step is the transport of CO₂ across the reacting interface through an high activated thermal process due to solid state diffusion of CO₃²⁻ in the bulk and/or the grain boundaries phases of CaCO₃ and/or of the solid solution. The microstructure evolution of the solid products follows a shear-transformation mechanism. At temperatures below 943 K, porous product particles are characterized by a monomodal narrow pore size distribution around 0.05 μm. At higher temperatures, a critical level of tensions inside the particles is reached and a bimodal pore size distribution around 1 and 0.05 μm is formed.     

Determination of physiological noble metals in human urine using liquid-liquid extraction and Zeeman electrothermal atomic absorption spectrometry

An extremely sensitive, reliable and simple procedure is described for the determination of physiological palladium, platinum and gold in human urine. The urine samples were adjusted to pH 4 (Pd, Au) or pH 5 (Pt), followed by conversion of the analytes to their pyrrolidinedithiocarbamate complexes. These complexes were separated from the matrix by liquid-liquid extraction into 4-methyl-2-pentanone resulting in a 25-fold enrichment. Determination was by electrothermal atomic absorption spectrometry (ET-AAS) using longitudinal inverse alternating current Zeeman-effect background correction. The limits of detection calculated from three standard deviations of the blank values were 20 ng l⁻¹ for Pd and Au and 70 ng l⁻¹ Pt. Within-day precision (n = 10, 5 μg l⁻¹) ranged 5.2%–7.7%. The procedure is successfully applied to determine urinary palladium, platinum and gold in nine unexposed persons. Palladium levels in urine ranged < 20–80 ng l⁻¹ (arithmetical MEAN=38.7 ng l⁻¹), while gold levels ranged < 20–130 ng l⁻¹ (36.0 ng l⁻¹). Physiological platinum levels in urine were all < 70 ng l⁻¹. The accuracy of the procedure was checked by analyzing a series of urine samples by a second independent method (magnetic sector field inductively-coupled plasma-mass spectrometry) in combination with UV photolysis.     

Shell-cross-linked vesicles synthesized from block copolymers of Poly(D,L-lactide) and Poly(N-isopropyl acrylamide) as thermoresponsive nanocontainers

A polylactide (D,L-PLA) macroRAFT agent was prepared by utilizing a hydroxyl-functional trithiocarbonate as a coinitiator for the ring-opening polymerization. The length of the resultant polymer was controlled by the concentration of the coinitiator leading to the formation of two PLA polymers with M(n) = 12500 g mol(-)(1) (PDI = 1.46) and M(n) = 20500 g mol(-)(1) (PDI = 1.38) each with omega-trithiocarbonate functionality. Chain extension of PLA via the RAFT (free radical) polymerization of N-isopropyl acrylamide (NIPAAm) resulted in the formation of amphiphilic block copolymers with the PNIPAAm block increasing in size with conversion. TEM measurements of the aggregates obtained by self-organization of the block copolymers in aqueous solutions indicated the formation of vesicles. The sizes of these aggregates were influenced by the ratio of both blocks and the molecular weight of each block. The lower critical solution temperature (LCST) of the block copolymer was largely unaffected by the size of each block. UV turbidity measurements indicated a higher LCST for the block copolymers than for the corresponding PNIPAAm homopolymers. Stabilization of the vesicles was attained by a cross-linking chain extension of the PNIPAAm block using hexamethylene diacrylate. As the trithiocarbonate group was located between the PLA and PNIPAAm blocks, the chain extension resulted in a cross-linked layer between the core and corona of the vesicles.     

The Additive Influence of Propane-1,2-Diol on SDS Micellar Structure and Properties

Micellar systems are colloids with significant properties for pharmaceutical and food applications. They can be used to formulate thermodynamically stable mixtures to solubilize hydrophobic food-related substances. Furthermore, micellar formation is a complex process in which a variety of intermolecular interactions determine the course of formation and most important are the hydrophobic and hydrophilic interactions between surfactant–solvent and solvent–solvent. Glycols are organic compounds that belong to the group of alcohols. Among them, propane-1,2-diol (PG) is a substance commonly used as a food additive or ingredient in many cosmetic and hygiene products. The nature of the additive influences the micellar structure and properties of sodium dodecyl sulfate (SDS). When increasing the mass fraction of propane-1,2-diol in binary mixtures, the c.m.c. values decrease because propane-1,2-diol is a polar solvent, which gives it the ability to form hydrogen bonds, decreasing the cohesivity of water and reducing the dielectric constant of the aqueous phase. The values of ΔGm0 are negative in all mixed solvents according to the reduction in solvophobic interactions and increase in electrostatic interaction. With the rising concentration of cosolvent, the equilibrium between cosolvent in bulk solution and in the formed micelles is on the side of micelles, leading to the formation of micelles at a lower concentration with a small change in micellar size. According to the ¹H NMR, with the addition of propylene glycol, there is a slight shift of SDS peaks towards lower ppm regions in comparison to the D₂O peak. The shift is more evident with the increase in the amount of added propane-1,2-diol in comparison to the NMR spectra of pure SDS. Addition of propane-1,2-diol causes the upfield shift of the protons associated with hydrophilic groups, causing the shielding effect. This signifies that the alcohol is linked with the polar head groups of SDS due to its proximity to the SDS molecules.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

Heterylimidazoles IV. Homolytic dissociation of hexaaryldimidazolyls and their heterocyclic analogs

The rate constants and activation energies for homolytic dissociation of 2,2-di[ ()-naphthyl]-, 2,2-diquinolinyl-, and 2,2-di(9-acridinyl)-4,4,5,5-tetraphenyldiimidazolyls in toluene in the presence of,-diphenyl--picrylhydrazine were determined. The degrees of dissociation of the diimidazolyls were found. The effect of substituents on the stability of imidazolyl radicals is discussed.See [1] for communication III.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1536–1539, November, 1974.     

Ceramic Foams from a Preceramic Polymer and Polyurethanes: Preparation and Morphological Investigations

Open-cell ceramic foams were obtained from a preceramic polymer (silicone resin) and blown polyurethanes. The preceramic polymer, which is crosslinked by condensation of silanol groups, was dissolved in CH2Cl2 and added to a liquid polyol containing the surfactant and the amine catalyst. Isocyanate was then added to the mixture and the foam was obtained through a twofold blowing mechanism (physical and chemical blowing). The morphology of the expanded polyurethane, which can be flexible or semirigid, characterized the final structure of the ceramic foam. The materials obtained were pyrolyzed in a nitrogen flux at temperatures of 1000–1200°C, thus allowing for the polymer-to-ceramic transformation to occur in the preceramic polymer. The ceramic foams produced in this way consisted of an amorphous silicon oxycarbide ceramic (SiOC). They presented a density ranging from 0.1 to 0.3 g/cm3. The average pore diameter ranged from 200 to 400 m and they possessed 80 to 90% open porosity.     

Stereoselectivity of (−)-(1<Emphasis Type="Italic">R</Emphasis>,2<Emphasis Type="Italic">S</Emphasis>)-2-methylamino-1-phenylpropan-1-ol preparation

Stereoselectivity of reductive amination of (R)-1-hydroxy-1-phenylpropan-2-one by methylamine was studied. From the four isomers possible, only two are produced by this reaction. These are marked as (−)-(1R,2S)-ephedrine (desired product) and (+)-(1S,2R)-ephedrine. The reaction stereoselectivity depends both on the type of the catalyst and reaction conditions. The most suitable type is the supported platinum. However, this catalyst rapidly deactivates. With a decreasing activity of Pt catalyst, the stereoselectivity decreases. It is also decreased during the production of the second liquid phase (water) in the reaction mixture.     

First observation of the hyperfine structure of an excited quintet state in liquid solution

After pulsed photoexcitation of a new fullerene-linked bisnitroxide, a well resolved transient EPR spectrum is detected which is assigned to an excited quintet spin state generated by spin coupling of the nitroxides and the fullerene excited triplet.     

Dynamics of a noncommutative monopole

We consider an electrically charged particle simultaneously interacting with a magnetic monopole and a dual monopole in the momentum space. It is a prototype of a three-dimensional system involving noncommuting and/or noncanonical variables but having geometric and also gauge symmetries in both the position and momentum spaces. We discuss the main features of the motions and conservation laws and the analogies to the case of planar motion.