J-aggregation of a water-soluble tetracationic porphyrin in mixed LB films with a calix[8]arene carboxylic acid derivative

The molecular organization of a mixed film, containing a water-soluble tetracationic porphyrin (TMPyP) and a p-tert-butyl calix[8]arene octacarboxylic acid derivative (C8A), at the air-water interface and on a solid support (LB film), has been investigated. Although the TMPyP aggregation was not detected at the air-water interface, TMPyP J-aggregates have been found in the LB films (Y-type). Unlike tetraanionic porphyrins, for example TSPP, the TMPyP J-aggregates are not induced by a zwitterion formation. The TMPyP J-aggregation is a result of a "double comb" configuration, where porphyrins from opposite layers are interwoven in a linear infinite J-aggregate. Our results confirm that TMPyP molecules tend to self-aggregate strongly, provided the electrostatic repulsions of their peripheral groups are cancelled by the anionic groups of the C8A matrix.     

Investigation of Lewis Acid versus Lewis Base Catalysis in Asymmetric Cyanohydrin Synthesis

The asymmetric addition of trimethylsilyl cyanide to aldehydes can be catalysed by Lewis acids and/or Lewis bases, which activate the aldehyde and trimethylsilyl cyanide, respectively. It is not always apparent from the structure of the catalyst whether Lewis acid or Lewis base catalysis predominates. To investigate this in the context of using salen complexes of titanium, vanadium and aluminium as catalysts, a Hammett analysis of asymmetric cyanohydrin synthesis was undertaken. When Lewis acid catalysis is dominant, a significantly positive reaction constant is observed, whereas reactions dominated by Lewis base catalysis give much smaller reaction constants. [{Ti(salen)O}₂] was found to show the highest degree of Lewis acid catalysis, whereas two [VO(salen)X] (X=EtOSO₃ or NCS) complexes both displayed lower degrees of Lewis acid catalysis. In the case of reactions catalysed by [{Al(salen)}₂O] and triphenylphosphine oxide, a non‐linear Hammett plot was observed, which is indicative of a change in mechanism with increasing Lewis base catalysis as the carbonyl compound becomes more electron‐deficient. These results suggested that the aluminium complex/triphenylphosphine oxide catalyst system should also catalyse the asymmetric addition of trimethylsilyl cyanide to ketones and this was found to be the case.     

Multiphoton reactive surfaces using ruthenium(II) photocleavable cages

Photoreactive surfaces derived from a new photocleavable surface modification agent and with photosensitivity in the Vis and IR region are described. A ruthenium(II) caged aminosilane, [Ru(bpy)(2)(PMe(3))(APTS)](PF(6))(2), was synthesized and attached to silica surfaces. Light irradiation removed the cage and generated surface patterns with reactive amine groups. The photosensitivity of this compound under single (460 nm) and two-photon (900) excitation is demonstrated. Functional patterns with site-selective attachment of other molecular species are described.     

Electrophoretically mediated microanalysis with partial filling technique and indirect or direct detection as a tool for inhibition studies of enzymatic reaction

The inhibition of the model enzyme, haloalkane dehalogenase from Sphingomonas paucimobilis, was investigated by a combination of electrophoretically mediated microanalysis with a partial filling technique, followed by indirect or direct detection. In this setup, part of the capillary is filled with a buffer suitable for the enzymatic reaction (20 mM glycine buffer, pH 8.6) whereas the rest of the capillary is filled with the background electrolyte optimal for separation of substrates and products. Two different background electrolytes and corresponding detection approaches were used to show the versatility of the developed method. The inhibition effect of 1,2-dichloroethane on the dehalogenation of brominated substrate 1-bromobutane was studied by means of 10 mM chromate - 0.1 mM cetyltrimethylammonium bromide (pH 9.2) in combination with indirect detection or 20 mM beta-alanine - hydrochloric acid (pH 3.5) in combination with direct detection. The method was used to estimate the inhibition constant K(I) (0.44 mM by indirect detection and 0.63 mM by of direct detection) and to determine the inhibition type. Compared to spectrophotometric and other discontinuous assays, the method is rapid, can be automated, and requires only small amount of reagents that is especially important in the case of enzymes and inhibitors.     

Conformational flexibility of a synthetic glycosylaminoglycan bound to a fibroblast growth factor. FGF-1 recognizes both the (1)C(4) and (2)S(O) conformations of a bioactive heparin-like hexasaccharide

The first direct NMR determination of the conformation of a conformationally flexible heparin-like hexasaccharide bound to a key receptor, FGF-1, is described. The determination has been based on the use of a 13C-labeled protein and a regular 12C sugar. FGF-1 recognizes several conformations of the iduronic moieties of the hexasaccharide. Therefore, this case is different than that described for the controversial recognition of heparin-like saccharides by AT-III, which seems to recognize just one conformation of the iduronic acid residues.     

Measurements of temperature and heat of phase transformation of pure silicon by using differential scanning calorimetry

Differential scanning calorimetry (DSC) technique has been applied for the experimental determination of temperature and heat of phase transition of pure silicon (7 N) during heating and cooling cycles at the rate of 10 K min^?1. The measurements were carried out in the temperature range of 25–1450 °C in a flow gas atmosphere (Ar, 99.9992%) using three types of crucibles made of alumina, h-BN and alumina covered with h-BN coating. The following characteristics were estimated from DSC curves: melting point of silicon—1414 °C, the heat of fusion—1826 J g^?1 and the heat of solidification—1654 J g^?1. It was found that the silicon evaporation phenomenon accompanying the tests had no effect on the measurements of temperature during solid-to-liquid and liquid-to-solid transformations and on the measurement of the latent heat of fusion. The effect of crucible type on the DSC measurements is discussed.

     

Asymmetric intermolecular Pauson-Khand reactions of unstrained olefins: the (o-dimethylamino)phenylsulfinyl group as an efficient chiral auxiliary

The first asymmetric version of intermolecular Pauson-Khand reactions of unstrained alkenes is described. Generally simple acyclic alkenes exhibit low reactivity and regioselectivity in intermolecular Pauson-Khand reactions; however, o-(dimethylamino)phenyl vinyl sulfoxide reacts under very mild conditions with a wide variety of terminal alkynes in a completely regioselective and highly stereoselective manner. The utility of the resulting 5-sulfinyl-2-cyclopentenones in asymmetric synthesis is illustrated by a very short enantioselective synthesis of the antibiotic (-)-pentenomycin I.     

The mass spectrometric study on aminohydroxamic acids‐based metallacrowns

Electrospray ionization mass spectrometry (MS) has been widely used to detect noncovalent interactions in supramolecular compounds, especially in biological systems. In our work, we present the application of the electrospray ionization MS technique to characterize the metallamacrocycles, known as metallacrowns. This project involves investigations of the aminohydroxamic acids structure and chirality influence on formation of ternary 12‐metallacrown‐4 complexes. For our experiments, we used a series of β‐aminohydroxamic acids and derivatives of histidinehydroxamic acid. A high stability of the studied supramolecular systems in the gas phase was confirmed by MS/MS experiments. We also proposed the fragmentation pathways for the studied compounds. Obtained results reveal that the ternary 12‐metallacrown‐4 formation process is not selective, and ligands of various structures and chiralities can be incorporated into these systems. Copyright © 2014 John Wiley & Sons, Ltd.     

Co-adsorption of surfactants and propyl gallate on the hydrophilic oxide surfaces

Propyl gallate (PG) adsolubilisation in the cationic, anionic and nonionic surfactant micelles formed in the bulk solution and at the silica/solution interface has been investigated. It was found that in the absence of surfactant, propyl gallate does not adsorb on the silica surface from aqueous solution. However, in the presence of hexyltrimethylammonium bromide (CTAB), its uptake by silica significantly increases. Alumina is quite an effective adsorbent for SDS and propyl gallate and does not adsorb nonionic TX-100. The addition of PG promotes adsorption of SDS and TX-100.     

Copper(II) complexes with a flexible oxamato ligand

We report on a convenient synthesis of the ligand precursor, diethylethylene-1,2-bis(oxamate), (Et₂H₂oeo, 1), and show how a partial and preferential hydrolysis of the ester group can give rise to the dianionic ligand, (H₂oeo)²⁻. Reaction of this ligand with Cu(II) affords the neutral dimeric species, [Cu₂(H₂oeo)₂], which has a low aqueous solubility. We describe the crystal structure of the hydrate Cu₂(H₂oeo)₂(H₂O)₄ (2) and report magnetic studies that show a weak exchange interaction in the solid. Under more basic conditions and in the presence of Cu(II) ions, we are able to avoid amide cleavage and yet deprotonate the amide group, resulting in the formation of the highly soluble [Cu(Hoeo)₂]⁴⁻ complex anion. The structure of (NBu₄)₄[Cu(Hoeo)₂](H₂O)₄ (3) is described and compared with the recently reported anhydrous phase.