Nucleation simulations using the fluid dynamics software FLUENT with the fine particle model FPM

This work is an assessment of the capabilities of the FLUENT-FPM software package to simulate actual nucleation experiments. In the first step, we verified the FPM condensation routine with the NEWALC code. Next, homogeneous nucleation of n-butanol, n-pentanol, and n-hexanol in a laminar flow diffusion chamber (LFDC) was simulated and the results were compared to experimental data and an earlier model, which was described by Lihavainen and Viisanen (2001) and will be called femtube2 in the following. Models based on classical nucleation theory typically give too small nucleation rates for alcohol vapors. Also, the FPM underestimates particle production by several orders of magnitude, the factor being a constant for each nucleation isotherm (i.e., at constant nucleation temperature). However, experimental observations beyond exact particle concentrations can be reproduced. We found a behavior similar to the experiment for the dependence of the concentration of nucleated particles N on the flow rate. After correcting the FPM nucleation rate by a constant factor, experimentally found vapor depletion effects could be simulated. Comparing the FPM and femtube2, we observed that the FPM systematically predicts lower saturation ratio values. Further investigation of vapor depletion showed significant differences between the FPM and the femtube2 model. Furthermore, FPM simulations confirm the earlier found carrier gas effect (Lihavainen and Viisanen, 2001).     

Stereocontrolled synthesis of spiroketals via Ti(Oi-Pr)4-mediated kinetic spirocyclization of glycal epoxides with retention of configuration

A Ti(Oi-Pr)4-mediated kinetic spiroketalization reaction has been developed for the stereocontrolled target- and diversity-oriented synthesis of spiroketals. In contrast to most existing methods for spiroketal synthesis, this reaction does not rely upon thermodynamic control over the stereochemical configuration at the anomeric carbon. Stereochemically diverse glycals are first alkylated at the C1-position to introduce a hydroxyl-bearing side chain, then epoxidized stereoselectively. Treatment with Ti(Oi-Pr)4 leads to an unusual kinetic epoxide-opening spirocyclization (spirocycloisomerization) with retention of configuration at the anomeric carbon. The reaction is proposed to proceed via a chelation-controlled mechanism and has been used to form five-, six-, and seven-membered rings with stereochemically diverse substituents. This approach may also be useful for the related intermolecular beta-mannosidation reaction. This Ti(Oi-Pr)4-mediated spirocyclization is stereochemically complementary to our previously reported MeOH-induced spirocyclization, which proceeds with inversion of configuration, and together, these reactions provide comprehensive access to systematically stereochemically diversified spiroketals.     

cis-trans formic acid dimer: experimental observation and improved stability against proton tunneling

We prepared the first cis-trans dimer of formic acid and measured its vibrational spectrum in a low-temperature Ar matrix. This preparation was done by selective vibrational excitation of the trans-trans noncyclic dimer. It was found that the stability of the cis-trans dimer against proton tunneling is strongly improved compared to the monomer, especially at elevated temperatures (>30 K). This surprising phenomenon was explained by differences in dynamical, energetic, and vibrational properties of the dimer and monomer. The obtained results show that the proton tunneling reactions can be strongly modified in the hydrogen-bonded solid network compared to the monomeric species.     

Selective and reversible control of a chemical reaction with narrow-band infrared radiation: HXeCC radical in solid xenon

The light-induced H + XeC2 <--> HXeCC reaction is studied in solid Xe, and the full optical control of this reaction is demonstrated. By narrow-band excitation in the IR spectral region, HXeCC radicals can be decomposed to a local metastable configuration and then selectively recovered by resonant excitation of the XeC2 vibrations. The novel recovery process is explained by short-range mobility of the reagents promoted by vibrational energy redistribution near the absorbing XeC2 molecule. This means that a chemical reaction can be selectively promoted in a desired place where the chosen absorber locates. The obtained results make a strong case of solid-state reactive vibrational excitation spectroscopy of weak radiationless transitions.     

Aldimine 2,6-bis(imino)pyridine iron(II) and cobalt(II)/methyl aluminoxane catalyst systems for polymerization of <Emphasis Type="Italic">tert-</Emphasis>butylacrylate

Aldimine 2,6-bis[(imino)methyl]pyridine iron(II) (1, 4, and 6) and cobalt(II) (3 and 5) complexes bearing bulky cycloaliphatic (bornyl and myrtanyl) or aromatic (naphthyl) terminal groups have been applied successfully, after activation with methyl aluminoxane (MAO), as catalysts for the polymerization of tert-butylacrylate. For comparison reasons, complex 2 that contains the ketimine ligand, 2,6-bis[(−)-cis-myrtanylimino)ethyl]pyridine (BMEP), has also been utilized. All studied complexes showed moderate polymerization activities, and they produced high molar mass syndiorich-atactic polymers. Surprisingly, the aldimine-based catalyst systems showed comparable activities compared with the corresponding ketimine complex (2), and they produced high molar mass polymers. In addition, complexes with bulky terminal cycloaliphatic substituents on the tridentate aldimine ligands showed higher polymerization activity compared with the aromatic ones (6). Polymerization activity and polymer molar masses are dependent on the ligand framework.     

Mode separation of Lamb waves based on dispersion compensation method

Ultrasonic Lamb modes typically propagate as a combination of multiple dispersive wave packets. Frequency components of each mode distribute widely in time domain due to dispersion and it is very challenging to separate individual modes by traditional signal processing methods. In the present study, a method of dispersion compensation is proposed for the purpose of mode separation. This numerical method compensates, i.e., compresses, the individual dispersive waveforms into temporal pulses, which thereby become nearly un-overlapped in time and frequency and can thus be extracted individually by rectangular time windows. It was further illustrated that the dispersion compensation also provided a method for predicting the plate thickness. Finally, based on reversibility of the numerical compensation method, an artificial dispersion technique was used to restore the original waveform of each mode from the separated compensated pulse. Performances of the compensation separation techniques were evaluated by processing synthetic and experimental signals which consisted of multiple Lamb modes with high dispersion. Individual modes were extracted with good accordance with the original waveforms and theoretical predictions.     

Polymerization of ethylene with new diimine complexes of late transition metals

Three pyridylimine based complexes of Ni^II and Co^II were reacted with methylaluminoxane (MAO) and tested as catalysts in ethylene polymerization. The two nickel catalysts produced mainly methyl branched polymers with good to moderate activity, while the cobalt compound showed only marginal activity. Reaction conditions strongly affect the polymer properties, such as molecular weight, melting temperature, degree of branching, and chain end unsaturation type.